Knockdown of ephrin-A5 expression by 40% does not affect motor axon growth or migration into the chick hindlimb

Bidirectional signaling between Eph receptor tyrosine kinases and their cell-surface protein signals, the ephrins, comprises one mechanism for guiding motor axons to their proper targets. During projection of motor axons from the lateral motor column (LMC) motor neurons of the spinal cord to the hindlimb muscles in chick embryos, ephrin-A5 has been shown to be expressed in the LMC motor axons until they reach the base of the limb bud and initiate sorting into their presumptive dorsal and ventral nerve trunks, at which point expression is extinguished. We tested the hypothesis that this dynamic pattern of ephrin-A5 expression in LMC motor axons is important for the growth and guidance of the axons to, and into, the hindlimb by knocking down endogenous ephrin-A5 expression in the motor neurons and their axons. No perturbation of LMC motor axon projections was observed in response to this treatment, suggesting that ephrin-A5 is not needed for LMC motor axon growth or guidance.     

The Wnt and BMP families of signaling morphogens at the vertebrate neuromuscular junction

The neuromuscular junction has been extensively employed in order to identify crucial determinants of synaptogenesis. At the vertebrate neuromuscular synapse, extracellular matrix and signaling proteins play stimulatory and inhibitory roles on the assembly of functional synapses. Studies in invertebrate species have revealed crucial functions of early morphogens during the assembly and maturation of the neuromuscular junction. Here, we discuss growing evidence addressing the function of Wnt and Bone morphogenetic protein (BMP) signaling pathways at the vertebrate neuromuscular synapse. We focus on the emerging role of Wnt proteins as positive and negative regulators of postsynaptic differentiation. We also address the possible involvement of BMP pathways on motor neuron behavior for the assembly and/or regeneration of the neuromuscular junction.     

Model and Simulation of an SMA Enhanced Lip Seal

The feasibility of using SMA wires to improve the seal effectiveness has been studied experimentally and numerically. In this article, we present only the numerical study of simulating the thermo-mechanical behavior for an SMA enhanced lip seal, leaving the test setup and results in the experimental counterpart. A pseudo 3D SMA model, considering 1D SMA behavior in the major loading direction and elastic response in other directions, was used to capture the thermo-mechanical behavior of SMA wires. The model was then implemented into ABAQUS using the user-defined material subroutine to inherit most features of the commercial finite element package. Two-way shape memory effect was also considered since the SMA material exhibits strong two-way effects. An axisymmetric finite element model was constructed to simulate a seal mounting on a shaft and the sealing pressure was calculated for both the regular seal and the SMA enhanced seal. Finally, the result was qualitatively compared with the experimental observation.     

Toward a multiscale model of the uterine electrical activity

A comprehensive multiscale model of the uterine muscle electrical activity would permit understanding the important link between the genesis and evolution of the action potential at the cell level and the process leading to labor. Understanding this link can open the way to more effective tools for the prediction of labor and prevention of preterm delivery. A first step toward the realization of such a model is presented here. By using as starting point a previously published model of the generation of the uterine muscle action potential at the cell level, a significant reduction of the model complexity is here achieved in order to simulate 2-D propagation of the cellular activity at the uterine tissue level, for tissue strips of arbitrary dimension. From the obtained dynamic behavior of the electrical activity simulated at the tissue level, the use of a previously validated volume conductor model at the organ level permits us to simulate the electrohysterogram as recorded on the abdominal surface by an electrode array. Qualitative evaluation of the model at the cell level and at the organ level confirms the potential of the proposed multiscale approach for further refinement and extension aiming at clinical application.     

Parametric distributions of connection lengths for the efficient analysis of fixed access networks

The access network displays an important particularity that the locations of the network components strongly depend on geometrical features such as road systems and a city’s architecture. This paper deals with the distributions of point-to-point connection lengths that play a major role in current problems in the analysis and planning of networks. Using the mathematical framework of stochastic geometry to model both the road system and the locations of network nodes, we derive analytical formulas for distributions of connection lengths. These formulas depend explicitly on a few parameters that can be computed easily and fast avoiding time-consuming reconstructions. We validate the approach by a comparison with actual network data and show its adaptability by considering several policies for nodes location and examples of use.     

Investigation on copper diffusion depth in copper wire bonding

Due to the dramatic price increase of precious metals, the replacement of Au with Cu in wire bonding has become an emerging trend for IC packaging nowadays. Similar to the Pb-free soldering transition, such a replacement is not just a simple drop-in material change. Comprehensive processing and reliability investigations are required before a mass production of electronic devices with Cu wire bonding can be implemented. However, among the existing studies on Cu wire bonding, it appears that most researchers just focused on issues above the wire bond pads. In fact, the Cu in the wire bonds may diffuse into the Si chip and impose reliability threats to the electronic devices. So far there was no research on the Cu-to-Si diffusion issue in Cu wire bonding. In this paper, an experimental study on the Cu-to-Si diffusion in Cu wire bond is reported. The Cu diffusion depth was characterized with the secondary ion mass spectrometry (SIMS) technique. Specimens with various configurations were designed and fabricated to investigate the effects of several parameters on the Cu-to-Si diffusion depth. The issues of concern include the amount of Cu supply, the bond pad deformation, and the barrier layer under the bond pad. In addition, some samples with conventional Au wire bonding were fabricated and tested in parallel for comparison.     

Process improvement for semipurified oleosomes on a pilot-plant scale

Semipurified oleosomes were isolated on a pilot-plant scale using improved-process extraction conditions. The improved process consisted of continuous centrifugation in a three-phase decanter with recirculation of slurry until most of the oleosomes were recovered. Oleosome fractionation, oleosin identification, and isoflavone and saponin mass distributions and recoveries were investigated. The improved pilot-plant oleosome extraction process was achieved in 8 h. A total of 91%± 1% of soybean oil was recovered as intact oleosomes. The oil content of the aqueous supernatant and the residue fractions were low at 2% and 3%, respectively. The aqueous supernatant fraction contained 40% total soybean protein. About 76% of the proteins present in the oleosome fraction were soybean storage proteins. Washing the semipurified oleosomes with a 0.1 M Tris-HCl, pH 8.6 containing 0.4 M sucrose, and 0.5 M NaCl resulted in the recovery of the associated storage proteins. The recovery of these proteins in addition to the protein in aqueous supernatant accounted for 79% of the total soybean storage proteins fractionated by this process. Oleosins were detected at 17 and 18 kDa. Isoflavones and saponins partitioned into the oleosome, aqueous supernatant, and residue fractions at different ratios with the majority, about 82 and 63 mole%, respectively, in oleosome and aqueous supernatant fractions, making these fractions an attractive source for phytochemicals.     

Channel microband chronoamperometry: from transient to steady-state regimes

Chronoamperometric transient regimes were investigated at a single channel microband electrode during chronoamperometric measurements in a microchannel continuously filled by a redox solution. Simulations were performed by spanning a wide range of conditions according to the geometry of microdevices, flow velocity, and time scale of experiments. Boundary conditions were identified and zone diagrams were established showing the predominance areas of transient and steady-state regimes. The predictions were compared to chronoamperometric experiments performed with microdevices of various geometries. The good agreement observed between data validated the predictions.     

Imaging single-cell signaling dynamics with a deterministic high-density single-cell trap array

Stochasticity in gene expression, protein or metabolite levels contributes to cell-cell variations, the analysis of which could lead to a better understanding of cellular processes and drug responses. Current technologies are limited in their throughput, resolution (in space, time, and tracking individual cells instead of population average) and the ability to control cellular environment. A few microfluidic tools have been developed to trap and image cells; however, in most designs available to date, there is a compromise among loading efficiency, speed, the ability to trap single cells, and density or number of trapped cells. To meet the needs of single-cell imaging studies, we developed a microfluidic platform for high-throughput capture and imaging of thousands of single cells. The optimized trapping mechanism enables 95% of the traps to be occupied with single cells, with a trap density of 860 traps/mm(2). The dense array allows up to 800 cells to be imaged simultaneously with a 4x objective and a typical camera setup. Capture occurs with low shear and 94% viability after 24 h. This platform is compatible with other upstream microfluidic components for complex cell stimulation patterns, and we show here the ability to measure heterogeneity in calcium oscillatory behavior in genetically identical cells and monitor kinetic cellular response to chemical stimuli.     

Racial differences in eligibility and enrollment in a smoking cessation clinical trial.

Objective: The purpose of this study was to compare the recruitment, eligibility screening, and enrollment of African American and White smokers into an intensive smoking cessation intervention trial [The Chicago STOP Smoking Trial (C-STOP)]. Methods: We compared demographic, smoking, substance use, and medical/psychiatric screening data from the recruitment records of 1,189 non-Hispanic, African American and White smokers screened for eligibility in the last year of a randomized pharmacological and behavioral smoking cessation trial. The study took place at a large urban medical center and two satellite locations within the Chicago metropolitan area. Results: Interest levels in the study were high among African American smokers, with twice as many African Americans as Whites contacting study staff for information and an initial screening. However, African Americans were nearly three times as likely not to be enrolled in the trial as Whites, because of higher ineligibility rates, failure to attend a screening session, and lower participation rates even among those meeting eligibility requirements. Conclusions: Racial differences were observed nearly at all levels of enrollment determination. These critical barriers to inclusion of African Americans in smoking cessation research limit our understanding of treatment efficacy and ultimately the ability to reduce the health disparities in tobacco-related disease experienced by African Americans. (PsycINFO Database Record (c) 2010 APA, all rights reserved)