Effect of calcination temperature on morphology,crystallinity and electrochemical properties of nano-crystalline metal oxides (Co3O4, CuO,and NiO) prepared via ultrasonic spray pyrolysis

Nano-crystalline metal oxides (Co₃O₄, CuO, and NiO) are synthesized as anode materials for lithium-ion batteries by an ultrasonic spray pyrolysis method. The effects of calcination temperature on the morphology, crystallite size and electrochemical properties of the metal oxides are investigated. X-ray diffraction (XRD) studies show that the crystallite size varies with the final calcination temperature. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations reveal that the calcination temperature strongly influences the morphology of the prepared metal oxides and this results in different electrochemical performance. The existence of a nano-scale microstructure for the prepared metal oxides has a strong relationship with irreversible capacity and capacity retention.     

Effect of structure on porous gas-diffusion electrodes for phosphoric acid fuel cells

This investigation is concerned with the variation of structure in the catalyst layer for porous gas-diffusion electrodes. The pore-size distribution and the total pore volume of the electrode are measured by a mercury penetration method. A model that accounts for this incomplete wetting electrode is solved by an orthogonal collocation method and matched with experimental observations. The numerical solution indicates that the effectiveness factor drops noticeably under high current density when the agglomerate radius is greater than 40 μm. When the agglomerate radius is smaller than 1.2 μm, however, the effect of ionic transport becomes important. The maximum reaction rate occurs at carbon-paper/ catalyst-layer interface when the effective conductivity of the electrolyte is larger than that of the solid phase. If the effective conductivity of the electrolyte is smaller, then the maximum reaction rate occurs at the electrode/electrolyte interface.     

Thermodynamic-behaviour model for air-cooled screw chillers with a variable set-point condensing temperature

This paper presents a thermodynamic model to evaluate the coefficient of performance (COP) of an air-cooled screw chiller under various operating conditions. The model accounts for the real process phenomena, including the capacity control of screw compressors and variations in the heat-transfer coefficients of an evaporator and a condenser at part load. It also contains an algorithm to determine how the condenser fans are staged in response to a set-point condensing temperature. The model parameters are identified, based on the performance data of chiller specifications. The chiller model is validated using a wide range of operating data of an air-cooled screw chiller. The difference between the measured and modelled COPs is within ±10% for 86% of the data points. The chiller’s COP can increase by up to 115% when the set-point condensing temperature is adjusted, based on any given outdoor temperature. Having identified the variation in the chiller’s COP, a suitable strategy is proposed for air-cooled screw chillers to operate at maximum efficiency as much as possible when they have to satisfy a building’s cooling-load.     

Fabrication of ordered flower-like ZnO nanostructures by a microwave and ultrasonic combined technique and their enhanced photocatalytic activity

Ordered flower-like zinc oxide (ZnO) nanostructures were fabricated via a facile microwave and ultrasonic combined technique. The product was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected area electron diffraction pattern (SAED). The flower-like ZnO nanostructures were assembled by a central petal and six symmetrical petals which grew radially from the center. The flower-like ZnO sample showed an enhanced photocatalytic performance compared with the ZnO microrods for the methylene blue (MB) degradation, which could be attributed to its special structure feature. Au/ZnO and Ag/ZnO nanocomposites were also synthesized and exhibited enhanced photocatalytic efficiency after decorating noble metal nanoparticles on the surface of flower-like ZnO nanostructures.     

Enhanced mechanical response of hybrid alloy AZ31/AZ91 based on the addition of Si3N4 nanoparticles

The main aim of this study was to simultaneously increase tensile strength and ductility of AZ31/AZ91 hybrid magnesium alloy with Si₃N₄ nanoparticles. AZ31/AZ91 hybrid alloy nanocomposite containing Si₃N₄ nanoparticle reinforcement was fabricated using solidification processing followed by hot extrusion. The nanocomposite exhibited similar grain size to the monolithic hybrid alloy, reasonable Si₃N₄ nanoparticle distribution, non-dominant (0 0 0 2) texture in the longitudinal direction, and 13% higher hardness than the monolithic hybrid alloy. Compared to the monolithic hybrid alloy (in tension), the nanocomposite simultaneously exhibited higher yield strength, ultimate strength, failure strain and work of fracture (+12%, +5%, +64% and +71%, respectively). Compared to the monolithic hybrid alloy (in compression), the nanocomposite exhibited higher yield strength and ultimate strength, lower failure strain and higher work of fracture (+35%, +4%, −6% and +6%, respectively). The beneficial effects of Si₃N₄ nanoparticle addition on the enhancement of tensile and compressive properties of AZ31/AZ91 hybrid alloy are investigated in this paper.     

A hierarchical Bayesian approach for risk assessment of melamine in infant formula based on cases of related nephrolithiasis in children

Although the 2008 outbreak of nephrolithiasis in children due to melamine-contaminated infant formula has subsided, it remains uncertain whether the present tolerable daily intake (TDI) of melamine provides sufficient protection for young children. To conduct a safety assessment for melamine in infant formula, we established a dose-response relationship based on 13 nephrolithiasis cases selected from 932 children, all of whom were under 5 years of age and had potentially been exposed to contaminated milk in China or Taiwan. According to the children's exposure history, distributions of individual daily melamine intake (mg/kg BW/day) were reconstructed using Monte Carlo simulations to account for uncertainties in exposure duration and melamine concentrations in the contaminated milk. Based on the simulated individual average daily intake (AVDI) of melamine, subjects were further classified into four separate AVDI groups: high, medium, low and a reference group. A statistical logistic model was then fitted for the dose-response relationship between nephrolithiasis incidence and daily melamine intakes using Markov chain Monte Carlo (MCMC) simulations. Based on the background exposure, spontaneous rate, and mode of action (MOA) of nephrolithiasis in children, the simulated lower bounds of the 95% CIs daily melamine intake ranged from 0.008 to 0.03 mg/kg BW/day corresponding to an additional risks of 0.1% is proposed as a plausible TDI, which is approximately an order lower than the current WHO-suggested TDI level of 0.2 mg/kg BW/day. More stringent regulations on melamine levels in infant formula should be considered to protect young children fully.     

Measurements of isoprene-derived organosulfates in ambient aerosols by aerosol time-of-flight mass spectrometry - part 1: single particle atmospheric observations in Atlanta

Organosulfate species have recently been identified as a potentially significant class of secondary organic aerosol (SOA) species, yet little is known about their behavior in the atmosphere. In this work, organosulfates were observed in individual ambient aerosols using single particle mass spectrometry in Atlanta, GA during the 2002 Aerosol Nucleation and Characterization Experiment (ANARChE) and the 2008 August Mini-Intensive Gas and Aerosol Study (AMIGAS). Organosulfates derived from biogenically produced isoprene were detected as deprotonated molecular ions in negative-ion spectra measured by aerosol time-of-flight mass spectrometry; comparison to high-resolution mass spectrometry data obtained from filter samples corroborated the peak assignments. The size-resolved chemical composition measurements revealed that organosulfate species were mostly detected in submicrometer aerosols and across a range of aerosols from different sources, consistent with secondary reaction products. Detection of organosulfates in a large fraction of negative-ion ambient spectra - ca. 90-95% during ANARChE and ~65% of submicrometer particles in AMIGAS - highlights the ubiquity of organosulfate species in the ambient aerosols of biogenically influenced urban environments.     

Piperidine induced polarity conversion in single-walled carbon nanotube field effect transistors

Piperidine is found to be an efficient electron doping agent that converts as-prepared p-type single-walled carbon nanotube (SWCNT) field effect transistors (FETs) into n-type SWCNT-FETs. Electron transfer from the amine group in piperidine to the SWCNTs is suggested to be the origin of the p- to n-type conversion. The effect of electron doping is further supported by the Raman tangential G(+) and G(-)-peak downshift up to 3 cm(-1) without the peak broadening. No detectable change in the Raman D-peak suggests non-covalent attachment of piperidine to the SWCNTs. A low temperature (110?°C) Si(3)N(4) passivation layer is used to maintain the long term air stability of the converted n-type devices. A complementary SWCNT inverter is demonstrated through integrating the n- and p-type SWCNT-FETs.     

A smart multifunctional nanocomposite for intracellular targeted drug delivery and self-release

A multifunctional 'all-in-one' nanocomposite is fabricated using a colloid, template and surface-modification method. This material encompasses magnetic induced target delivery, cell uptake promotion and controlled drug release in one system. The nanocomposite is characterized by scanning electron microscopy, transmission electron microscopy, x-ray diffraction, N(2) adsorption and vibrating sample magnetometry. The prepared material has a diameter of 350-400 nm, a high surface area of 420.29 m(2) g(-1), a pore size of 1.91 nm and a saturation magnetization of 32 emu g(-1). Doxorubicin (DOX) is loaded in mesopores and acid-sensitive blockers are introduced onto the orifices of the mesopores by a Schiff base linker to implement pH-dependent self-release. Folate was also introduced to improve DOX targeted delivery and endocytosis. The linkers remained intact to block pores with ferrocene valves and inhibit the diffusion of DOX at neutral pH. However, in lysosomes of cancer cells, which have a weak acidic pH, hydrolysis of the Schiff base group removes the nanovalves and allows the trapped DOX to be released. These processes are demonstrated by UV-visible absorption spectra, confocal fluorescence microscopy images and methyl thiazolyl tetrazolium assays in vitro, which suggest that the smart nanocomposite successfully integrates targeted drug delivery with internal stimulus induced self-release and is a potentially useful material for nanobiomedicine.