Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion

Aluminum has been deformed by equal channel angular extrusion (ECAE) to obtain submicron-grained structures under different deformation routes. The deformation routes were varied by rotating billets through 0, 90, and 180 deg between each extrusion pass, and were designated as route A, B_C, and C, respectively. Based on quantitative microstructural analysis, the effectiveness of the deformation route is shown to depend upon the different definition used. The order of effectiveness is (a) A > B_C > C for both 90 and 120 deg dies, in terms of the generation of high-angle grain boundaries (HAGBs); (b) B_C > C > A for both 90 and 120 deg dies, in terms of the formation of equiaxed shape of grains; and (c) B_C > A > C for 90 deg die and B_C ∼ A > C for 120 die, in terms of reducing grain size. It is suggested that the generation of HAGBs can be related to the accumulation of nonredundant strain, while the shape and orientation of grains may be linked to the shearing patterns of the deformation route.     

Approach for Overcoming Numerical Inaccuracy Caused by Load Discontinuity

It was found that the discontinuity at the end of an impulse will lead to numerical inaccuracy as this discontinuity will result in an extra impulse and thus an extra displacement in the time history analysis. In addition, this extra impulse is proportional to the discontinuity value at the end of the impulse and the size of integration time step. To overcome this difficulty, an effective approach is proposed to reduce the extra impulse and hence the extra displacement. In fact, the novel approach proposed in this paper is to perform a single small time step immediately upon the termination of applied impulse, whereas other time steps can be conducted by using the step size determined from accuracy consideration in period. The feasibility of this approach is analytically explored. Further, analytical results are confirmed by numerical examples. Numerical studies also show that this approach can be applied to other step-by-step integration methods. It seems that to slightly complicate the programming of dynamic analysis codes is the only disadvantage of this approach.     

Applying CIM technology to image factories

Image processing allows the automation of the business transaction, turning “paper factories” into “image factories.” This burgeoning new area of computerization needs new paradigms, theories, and methods to maximize its effectiveness at cutting time and costs. This paper investigates what this new area of computerization can gain from CIM technology. It examines the similarities between the processing of computer images in a paperless business environment and the processing of materials into products in the manufacturing plant. These similarities will allow us to apply mature, well-tested CIM techniques to emerging image factories.     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Wavelength and repetition rate tunable optical pulse source using a chirped fiber Bragg grating and a nonlinear optical loop mirror

We experimentally demonstrate a simple and novel scheme for tunable real-repetition-rate multiplication, based on the combined use of fractional Talbot effect in a linearly tunable chirped fiber Bragg grating (FBG) and cross-phase modulation (XPM) effect in a nonlinear optical loop mirror (NOLM). By tuning the group-velocity dispersion of the chirped FBG fabricated with the S-bending method using a uniform FBG, we obtain high quality pulses at pseudorepetition rates of 20/spl sim/50 GHz from an original 8.5-ps 10-GHz soliton pulse train. We subsequently convert this pseudorate multiplication into a real-rate multiplication using XPM effect in an NOLM. A wavelength tuning is also achieved over a /spl sim/15-nm range.     

Designing better adaptive sampling algorithms for ECG Holtersystems

Let Ψ be any adaptive sampling algorithm that can run in real time on a tapeless multichannel electrocardiogram (ECG) Holter system. Simple methods which can significantly improve Ψ's fidelity are described and their results are compared in this paper. It is shown that by adding some simple tests to Ψ, the signals reconstructed by Ψ can be improved as much as 5.45 dB. It is also shown that under the same data rate, a good data compressor with slowly sampled input ECG is preferable to a bad data compressor with highly sampled input ECG     

Optical imaging of anatomical maps derived from magnetic resonanceimages using time-independent optical sources

Presents a model suitable for computing images of absorption cross sections of thick tissue structures illuminated at near infrared (NIR) wavelengths from tomographic projection data. Image reconstruction is accomplished by solving a system of linear equations derived from transport theory. Reconstruction results using different algebraic solvers are shown for anatomical maps of the breast, derived from magnetic resonance imaging data, containing two simulated pathologies, in which case qualitatively good reconstructions were obtained. Evaluation of magnetic resonance (MR) data to optimize NIR optical tomographic imaging methods and to assess the feasibility of a combined MR-optical measurement scheme is discussed     

Multiple negative-differential-resistance (MNDR) phenomena of ametal-insulator-semiconductor-insulator-metal (MISIM)-like structurewith step-compositioned InxGa1-xAs quantum wells

In this paper, a new multiple negative-differential-resistance (MNDR) device based on a metal-insulator-semiconductor-insulator-metal (MISIM)-like structure with step-compositional In_xGa_1-x As quantum wells has been fabricated and demonstrated. The interesting MNDR phenomena are found in the current-voltage (I-V) characteristics of this device. At room temperature, the triple switching behaviours and quadruple stable operation states are obtained. In addition, the sixfold switching behaviors and a staircase-shaped I-V characteristic are observed at -105°C. A sequential carrier accumulation at InGaAs subwells and the potential lowering process are used to qualitatively explain the interesting MNDR phenomena. From the experimental results, it is shown that the studied device has good potential in multiple-valued logic applications     

Metastasis induced by overexpression of p185neu-T after orthotopic injection into a prostatic epithelial cell line (NbE)

The effects of the composition of bacteriological growth media on the light output in a chemiluminometric assay of beta-galactosidase in Escherichia coli using 1,2-dioxetane substrates has been studied. In this assay a basic conflict exists between conditions that promote optimal bacterial growth and those conducive to maximal chemiluminescence. Common medium ingredients such as yeast or beef extract, protein hydrolysates and lactose suppress light emission and/or lead to high backgrounds. Quenching of light emission is probably partly due to light absorption by medium ingredients such as oxgall, and partly to interference with the reaction triggering the chemiluminescent process. Elevated backgrounds are caused by the presence of high concentrations of protein hydrolysates, which interact with the alkali in the accelerator solution. Only two purposely developed media, i.e. ILM and Colicult are shown to reconcile the requirements of growth support with that of optimal luminescent properties.