激光二极管端面抽运圆形截面Nd∶GdVO_4晶体的热形变

以解析分析理论为基础,研究圆截面Nd∶GdVO4激光晶体受到具有高斯分布半导体激光端面中心入射时,晶体温度场分布和抽运面热形变分布情况。通过对激光二极管(LD)端面入射晶体工作特点分析,建立了符合实际工作情况的热模型,利用热传导方程新求解方法,得出了圆形截面Nd∶GdVO4晶体温度场分布和端面热形变场通解表达式,对比分析了圆形截面和矩形截面Nd∶GdVO4晶体的热形变。研究结果表明,当使用输出功率为15 W激光二极管端面中心入射Nd∶GdVO4激光晶体时,在抽运端面中心获得187.5℃最高温升和1.313μm最大热形变量。两种截面晶体具有相同的热形变形状,当截面尺寸不太大时,如果圆形截面晶体的半径等于矩形截面晶体半边长,最大热形变量将减少4.1%。这种方法还可以应用到其他圆形截面晶体热问题研究中,为有效解决激光系统热问题提供了理论依据。     

论联合机动编队综合电子战

联合机动编队综合电子战要求平衡编队内部电子战能力,注重整体对抗,最大限度发挥联合机动编队各类电子战设备的作战效能,确保我联合机动编队整体安全。     

Delayed fluorescence spectroscopy and mechanism of the 730 nm component of chloroplast

Charge recombination in reaction center (RC) of photosystem II(PS II) is regarded as the location of 685 nm delayed fluorescence (DF). The mechanism of 730 nm component appearing in the DF spectrum for chloroplast was studied by various spectral analysis methods. Experimental results of the DF spectrum at different chloroplast concentration show that the intensity of peaks at 685nm and 730 nm ascends with the chloroplast concentration increasing when the concentration is relatively low. When the concentration increases to the level of 7.8μg/ml, a maximum intensity of the peak at 685 nm appears but the intensity of 730 nm peak still increases. The peak at 730 nm finally reaches a maximum intensity at the chloroplast concentration of 31.2 μg/ml while the intensity of the 685 nm peak has apparently fallen down. The results of absorption spectrum show that the ratios of A685 to A730 keep almost constant with the increasing of chloroplast concentration. Furthermore, the excitation spectrum for 730 nm fluorescence shows that the 685nm light has high excitation efficiency. These results indicate that the 730 nm component of DF spectrum is the fluorescence of chlorophyll in PS I RC excited by 685 nm DF. Meanwhile, this can be further verified by the invariability of DF spectrum at different delay time (1 second∼9 seconds). This research is supported by the National Natural Science Foundation of China (60378043), and supported by the Opening Foundation of the Key Laboratory of Opto-Electronic Technology and Intelligent Control (Lanzhou Jiaotong University), Ministry of Education (K04108)     

Super-Stretchable,Anti-Freezing,Anti-Drying Organogel Ionic Conductor for Multi-Mode Flexible Electronics

Due to their intrinsic flexibility, tunable conductivity, multiple stimulus-response, and self-healing ability, ionic conductive hydrogels have drawn significant attention in flexible/wearable electronics. However, challenges remain because traditional hydrogels inevitably faced the problems of losing flexibility and conductivity because of the inner water loss when exposed to the ambient environment. Besides, the water inside the hydrogel will freeze at the water icing temperatures, making the device hard and fragile. As a promising alternative, organogels have attracted wide attention because they can, to some extent, overcome the above drawbacks. Herein, a kind of organogel ionic conductor (MOIC) by a self-polymerization reaction is involved, which is super stretchable, anti-drying, and anti-freezing. Meanwhile, it can still maintain high mechanical stability after alternately loading/unloading at the strain of 600% for 600 s (1800 cycles). Using this MOIC, high-performance triboelectric nanogenerator (TENG) is constructed (MOIC-TENG) to harvest small mechanical energy even the MOIC electrode underwent an extremely low temperature. In addition, multifunctional flexible/wearable sensors (strain sensor, piezoresistive sensor, and tactile sensor) are realized to monitor human motions in real time, and recognize different materials by triboelectric effect. This study demonstrates a promising candidate material for flexible/wearable electronics such as electronic skin, flexible sensors, and human-machine interfaces.     

基于局部二值模式和四元数的行人检测

局部二值模式(LBP)特征具有光照不变性、旋转不变性及计算简单等特性,能有效表示行人特征,广泛应用于行人检测。LBP 特征的提取方法通常基于灰度图像,如果用于彩色图像,则没有充分考虑各通道之间的相关性,不能保证行人检测的准确性。为此,我们对彩色图像的红、绿、蓝三通道的LBP 特征,以四元数的形式表示,利用四元数的性质,提出一种P-LBP特征,再利用k-最近邻算法训练分类器。该方法在INRIA 数据集上进行实验,与HOG、S-LBP、F-LBP、HOG-LBP特征进行比较,具有更好的效果。     

电磁轨道炮电磁力学分析

在矩形电枢与简单轨道的基础上建立了电磁轨道炮轨道和电枢上磁场扩散的二维有限元计算模型,模型没有考虑轨道与电枢的形变.分析了电枢运动引起的速度趋肤效应,随着轨道与电枢相对速率的增加,磁场、电流的趋肤效应越明显,当速度大于1 000 m·s-1时,磁场和电流集中分布在轨道内表面与电枢后表面附近很小的区域,继续增大相对速率不会使磁场分布发生明显变化.采用ANSYS软件计算了静态复杂电枢结构情形下轨道电枢上的磁场和电流分布,U形电枢结构对于抑制电枢与轨道交界处磁场、电流的过分集中有明显的改善作用.     

航天级双读数多圈绝对式光电编码器设计

利用多圈光电编码器具有体积小、量程大以及数字量输出等优点,设计了基于双读数系统的航天级多圈绝对式光电编码器。根据航天相机的精度要求,采用精度高、分辨率高的绝对式矩阵玻璃码盘作为一级码盘完成角度测量;根据电机转动的计数要求,采用重量轻,体积小的绝对式矩阵金属码盘作为二级码盘完成对一级码盘的转动圈数计数;其具有的双狭缝及双读数系统可实现信号处理电路冷备份。按照鉴定级航天产品要求,通过热学环境实验和力学环境实验对编码器性能进行了验证。实验结果表明,所设计的编码器精度范围为±100″内、分辨率为80″、测量圈数为16圈、外形尺寸为φ50 mm×50 mm、重量为270 g,稳定性高、可靠性强,且满足高分辨率航天设备设计指标。     

4G移动通信终端数据吞吐量测试研究

4G移动通信终端的数据吞吐量测试是验证终端数据吞吐量是否能够达到标准要求的方法,对保障用户的高速接入有重要意义.介绍了3种主要的数据吞吐量测试方法:仪表测试、室内网络测试和外场测试;从测试环境可控性、测试效率、问题复现定位、贴近用户体验等方面,比较了当前主要测试方法之间的优劣,并展望了未来的发展趋势.     

基于MoO3和Re-Bphen修饰有机太阳能电池性能的研究

有机太阳能电池(OSCs)的性能与材料及器件结构密切相关。以MoO3为阳极缓冲层,有机金属配合物Re-Bphen为阴极缓冲层,制备了结构为ITO/MoO3/CuPc/C60/Re-Bphen/Al的OSCs。在标准太阳光照条件下,当MoO3和Re-Bphen的厚分别为5nm和8nm时实现了器件的最佳性能,能量转换效率(PCE)和器件寿命均显著提高。结合器件结构,分析了工作机制。     

一种最小机械比能计算参数优化的方法

机械比能是衡量钻井效率的重要因素之一,它用来衡量钻头破碎单位体积岩石耗能大小[1]。传统的比能计算模型通过多个参数进行计算来求得比能值,较为复杂。文章通过利用比能计算模型中参数之间的关系,假设并通过Matlab拟合验证参数之间关系的函数方程,将原有的模型化简为只拥有钻压一个计算参量的新计算模型。通过求解新模型一阶导数的零点,求得最优钻压值,并以此求得最小机械比能,最终确定最佳钻井参数。