一种基于软件无线电的中频数字接收机的设计实现

中频数字接收机是随着数字信号处理技术的不断发展而成熟起来的;此文主要是基于软件无线电的思想,采用MATLAB和DSP相结合的新颖开发方法,利用MATLAB-DSP集成开发环境Embedded Target for the TI TMS320C6000DSP Platform,从Simulink模型自动生成TIC6000DSP的可执行代码,从而缩短了DSP算法软件的研发周期;文中的输入信号是AM调制信号,采样率为1.6MHz,调制信号为2kHz,载波为400kHz,经过128倍抽取和滤波,最后输出数据流速率为12.5kHz;通过仿真实验证明,采用软件无线电的思想不仅满足了设计需求,而且增强了不同系统之间的互通性、兼容性、灵活性和可靠性,同时降低了成本。     

开源自动化控制软件Sedona在物联网中的应用

通过讨论物联网的现状、关键技术及发展方向,主要介绍了一种开源自动化控制软件Sedona在物联网的应用技术,包括在物联网架构中如何进行软件开发和应用程序设计,并介绍了该架构的技术特点。Sedona语言是一种通用的面向组件化的编程语言。Sedona虚拟机是一个小型解析器,具有良好的移植性,内嵌多种通信协议,可以运行在任何基于IP通信的网络上。最终实现各设备之间集中控制、分散管理的目标。     

Input‐to‐state stability of min‐max MPC scheme for nonlinear time‐varying delay systems

This paper studies the robustness problem of the min–max model predictive control (MPC) scheme for constrained nonlinear time‐varying delay systems subject to bounded disturbances. The notion of the input‐to‐state stability (ISS) of nonlinear time‐delay systems is introduced. Then by using the Lyapunov–Krasovskii method, a delay‐dependent sufficient condition is derived to guarantee input‐to‐state practical stability (ISpS) of the closed‐loop system by way of nonlinear matrix inequalities (NLMI). In order to lessen the online computational demand, the non‐convex min‐max optimization problem is then converted to a minimization problem with linear matrix inequality (LMI) constraints and a suboptimal MPC algorithm is provided. Finally, an example of a truck‐trailer is used to illustrate the effectiveness of the proposed results. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

低温裂纹张开位移预测方法的讨论

把低温影响下的COD试验数据用灰色理论中的累加方法进行累加，可以使一组没有规律的数据成为一条光滑的曲线．然后利用人工神经网络和自适应模糊推理系统两种方法进行预测，算例的结果表明用一次累加后的数列预测精度较高。     

"牺牲"阳极法合成乙醇钽研究

研究了“牺牲“阳极法电化学合成乙醇钽过程中,添加剂种类与浓度、电解液温度、阴阳极极距和电流密度的影响.选取最佳合成条件为:四甲基氯化铵0.04 mol/L,温度为电解液的沸腾温度,极距约2 cm,电流密度220 A/m2.电合成的混合液经常压蒸馏和减压蒸馏,得到产品用红外光谱、拉曼光谱和元素分析进行表征,确定了产品为乙醇钽.电合成的电流效率大于95%,产品蒸馏时钽的直收率82.8%.     

EFFECT OF RARE EARTH ADDITIONS ON THE IMPACT FRACTURE OF Cr18Nil8Si2 STEEL

<正> Cr 18 Ni 18 Si 2钢经热处理后的低温冲击断口,其中加稀土的为穿晶断口,而未加稀土的为混合型断口。 试验用钢用高频感应炉冶炼,锭重20kg,锻成15×15mm方棒,再加工成冲击试样。其化学成分如下。稀土的加入是将一号混合稀土合金缚在钢棒上插入熔池。     

Ionization of Porous Hypercrosslinked Polymers for Catalyzing Room-Temperature CO2 Reduction via Formamides Synthesis

Catalysis Letters - Porous materials with heterogeneous nature occupy a pivotal position in the chemical industry. This work described a facile pre- and post-synthetic approach to modify porous...     

Adsorption characteristics of hexadecyl ammonium with different numbers of carbon chains in montmorillonite and the structure of the prepared composites

Journal of Porous Materials - The dynamics and thermodynamics of adsorption of hexadecyl ammonium with different numbers of carbon chains in montmorillonite (Mt) with different layer charge density...     

钢丝绳张紧装置在大行程拖链上的应用

介绍了给DY3000×20m数控机床大行程拖链增设的张紧装置,该装置解决了拖链无法自动复位的问题,使用方便、经济可行。     

Effect of sulfate on Cu(Ⅱ) sorption to polymer-supported nano-hydrated ferric oxides: Experimental and modeling studies

Incorporating of hydrous ferric oxide(HFO) inside porous supports with large sizes has become an effective way to decontaminate the water from heavy metals. Ubiquitous anions like sulfate are usually present in high concentrations in water, and might greatly affect adsorption behavior of hybrid HFO. Here, a polymer-based HFO-CPS was fabricated by encapsulating nano-HFO inside a chloromethylated polystyrene polymer(CPS) and the reactivity of HFO-CPS with Cu(Ⅱ) was evaluated in the presence of sulfate ions.Surface complexation theory was firstly employed to describe the effect of sulfate on Cu(Ⅱ) adsorption edges of hybrid HFO-CPS, where constant capacitance model(CCM) was adopted. The available weak adsorption site Fe_((2))OH of hybrid HFO-CPS was found to decrease from 20% Fe to 5% Fe, which might be caused by the pore plugging effect after HFO encapsulation. With the assumption that a ternary complex was formed, the effect of sulfate on Cu(Ⅱ) adsorption by HFO-CPS were successfully described by CCM using the optimized Fe_((2))OH site under different sulfate concentrations(1 or 10 mmol·L~(-1)) and Cu/Fe ratios(0.0042 or 0.0252). It is confirmed that the formation of Fe OHCu SO_4 ternary surface complexes played an important role in enhancing Cu(Ⅱ) adsorption on HFO-CPS in the presence of sulfate.