浅析配电网馈线自动化智能监控模式

阐述了FA概念。具体介绍了目前在我国配电网自动化中采用的四种智能馈线自动化模式,并通过对实现方法、控制原理、应用效果等方面的分析讨论,总结出了这四种模式各自的控制特点。对四种智能馈线自动化模式中所采用的通信系统分通讯主干网和通讯规约两方面进行了详尽剖析。最后提出了实现配电网馈线自动化智能监控模式要解决的几个关键技术问题。     

基于C/S的工程设计智能化信息系统设计

本文探讨了工程设计流程智能化管理，指出了建立工程项目设计流程管理模型的方法，以及系统的详细分析与设计。     

当代信息传播设计的趋势和走向

通过信息社会人类对信息感知的扩展性研究 ,从信息感知方式及思维形态的差异性来分析传统印刷文化与当代视屏文化的异同 ,以图形语言的变化来揭示当代视觉传播设计技术特征、视觉特征、多元化语言特征以及发展趋势     

Thermal characterization of gallium arsenic nitride epilayer on gallium arsenide substrate using pulsed photothermal reflectance technique

Thermal conductivity of gallium arsenic nitride (GaAsN) epilayer on gallium arsenide (GaAs) substrate prepared by molecular beam epitaxy technique was measured using pulsed photothermal reflectance technique. Three-layer model incorporated thermal boundary resistance was applied to extract the thermal properties from the sample's photothermal response. Within the thickness ranging from 20 to 80 nm, no thickness dependent relationship with thermal conductivity of GaAsN epilayer was found, and the average thermal conductivity is approximately 27 W/mK at room temperature. The thermal boundary resistance at the Au/GaAsN interface is in the order of 10⁻⁸ m²K/W.     

Characterization of PdAg/Al2O3 composite membrane by electroless co-deposition

In this work, PdAg/Al₂O₃ composite membranes prepared by electroless co-deposition technique have been studied. Effects of plating time, Ag composition and total concentration of metal ions on surface morphologies, composition and microstructure of the resulting layers were investigated. Scanning electron microscope, energy dispersive spectrometer and nitrogen permeation technique were used to characterize the as-prepared composite membranes. From the experimental results, it shows that the surface morphology of the deposited PdAg layer is strongly affected by the Ag content of the plating bath. Since large differences of deposition rates and growth modes are observed between Pd and Ag grains, the PdAg layer exhibits the dendritic structure. As the Ag content is approximately 50%, the dendritic structured PdAg layer reveals the largest nitrogen permeability with the smallest size of residual pores. Furthermore, a comprehensive electrochemical analysis is proposed to interpret the composition and structure of the PdAg layer. Eventually, the experimental results are quite consistent with those predicted from the electrochemical analysis.     

Design of a permanent magnetic circuit with air gap in a magnetic refrigerator

We calculate the magnetic field distribution of a permanent magnetic circuit with an air gap in a magnetic refrigerator by a finite-element method, and compare the field strengths of different structural parameters of the magnetic circuit. We show how the structure of the magnetic circuit can be optimized and present some approaches to improve the structure for a specific magnetic circuit. The main purpose is to provide basic parameters for the design of a practical magnetic refrigerator.     

Percolation threshold and morphology of composites of conducting carbon black/polypropylene/EVA

Conducting carbon black (CB), one of the intrinsic semi-conductors, was added into matrix polypropylene (PP) to prepare conducting composites by means of the melt processing method. Another component EVA was mixed into the composites in order to lower the percolation threshold. The percolation threshold of the ternary CB/PP/EVA composites was merely 3.8 vol%, while it was up to 7.8 vol% for the binary CB/PP composites without EVA. The conductivity of the ternary CB/PP/EVA composites was up to 10^–2 S/cm when the CB percentage was 5 vol%, while that of the binary CB/PP was lower than 10^–2 S/cm when the CB percentage was up to 10 vol%. DSC thermograms of the CB/PP/EVA composites showed that the melting peak shifted to low temperature with increasing CB content. The addition of CB and EVA resulted in the decrease of the crystallinity of PP in the ternary composites. The mechanical properties are also discussed. SEM and TEM were employed to study the morphology of the blend system. The results indicated that CB existed in the form of aggregations in the blend system. The smallest unit that formed a percolation network was grape-like aggregates with some small branches, which consisted of some CB particles, rather than the individual particles. This distribution was very valuable for forming conducting paths and for lowering the percolation value.     

The effects of surface-plasma treatment of thin-film hydrogen silesquioxane low k dielectric

Hydrogen silesquioxane (HSQ) is a low dielectric constant material and a potential substitute for conventional silicon dioxide insulator in ULSI system. In this study, the effect of plasma treatment on HSQ films is investigated. The bond structure changes of HSQ after curing, plasma treatment, and water absorption were observed with Fourier transform infrared spectroscopy. Densification of the film occurs after curing, the higher the curing temperature, the lower the dielectric constant and refractive index of the film. Both H₂- and O₂-plasma treatments are employed in this study. The H₂-plasma bombardment enhances the formation of the network structure but raises the moisture absorption of HSQ films. It is found that films subjected to both H₂- and O₂-plasma treatments have lower dielectric constant than those subjected to O₂ treatment alone. Possible mechanisms for the effects of plasma treatments are explored. The residual stress of HSQ film is also studied.     

Effect of synthesis temperature on density and microstructure of MgB2 superconductor at ambient pressure

The experimental thermodynamic of MgB₂ synthesis process and phase compositions have been investigated by diffraction thermal analysis (DTA) technology and X-ray diffraction. The fabrication of MgB₂ bulks and superconducting properties at the temperatures range from 600 to 800°C were reported. And microstructure of MgB₂ bulks were observed by scanning electron microscope (SEM). A method was developed to determine the porosity of MgB₂ and the highest density can be obtained in MgB₂ prepared at 650°C at ambient pressure. It is found that the vapor pressure of Mg increases remarkably at high temperature, leading to the high porosity in MgB₂ samples. MgB₂ bulk with good superconducting property and fine microstructure was synthesized at 750°C.