MC34063 DC/DC转换控制电路测试方法概述

目前,DC/DC转换器广泛应用于远程及数据通信、计算机、办公自动化设备、工业仪器仪表、军事、航天等领域,涉及到国民经济的各行各业。文章以其中有一定代表性的MC34063电路为例,扼要介绍其电特性和用其构成的升压电路的测试方法,并解析其测试原理和升压电路设计中的注意事项,对DC/DC转换器的分析测试和量产测试提供一些借鉴。     

表面应力测量SOI压阻悬臂梁传感器设计与优化

研究了基于SOI(silicon on insulator)工艺的压阻悬臂梁传感器的静态和动态特性,推导了其用于表面应力测量时灵敏度和分辨率的表达式.分析了各种参数对性能的影响,提出了参数设计与优化的流程.得到了一套灵敏度为-1.8×10-3m/N,分辨率为8.5×10-5N/m,弹性系数为0.023N/m,谐振频率为1.3×104Hz的设计参数.     

色噪声环境下GTD模型的参数估计

本文将能够精确描述高频电磁散射的GTD信号模型引入MUSIC算法,并对MUSIC算法做了相应改进。提出利用特征分析方法中信号与噪声子空间正交特性,使改进后的MUSIC算法既能够精确估计目标散射中心位置,又能估计散射中心类型。本文采用基于四阶累量的MUSIC算法,在一定程度上克服了高斯色噪声对MUSIC算法的影响,拓宽了GTD 模型参数求解的条件。     

DF协作中继网络基于买者/卖者博弈的中继选择和功率分配策略

该文针对采用解码-转发(DF)协议的协作中继网络,提出了一种基于买者-卖者博弈的中继选择和功率分配策略,通过将用户建模为买者,可以以最大效用为标准选择最优中继和确定最佳的购买功率;将中继建模为卖者,可通过先市场后利润的功率价格调整策略获得最大的利润。分析了两者博弈达到平衡的条件并进行了仿真,结果验证了纳什均衡点的存在并表明,该策略计算量少,收敛速度快,实用性强,在兼顾用户和中继节点的利益的同时可以有效提高用户的传输速率,扩大基站的覆盖范围,提高功率利用效率。     

Design of a novel chip on glass package solution for CMOS image sensor device

This paper presents a chip-on-glass (COG) package solution for CMOS image sensors based on highly precise and reliable bumping and flip-chip bonding techniques. The package is fabricated using three core techniques, namely the damage-free image sensor bumping technique, the wafer form glass substrate patterned technique, and the damage-free flip-chip bonding technique. Since the proposed package concept is new, the effects of the package geometry and material properties on the package reliability are uncertain in the initial design stage. A three-dimensional nonlinear finite element model of the proposed CMOS image sensor package is created. In the simulations, the applied thermal load is cooled from 200 °C to ambient temperature (25 °C) to model the thermal deformation and warpage of the package during the practical ACF assembly cooling process. The design parameters influencing the reliability of the package, i.e. the material properties of the ACF, the thickness of the image chip and the thickness of the optical glass are investigated. Two control levels are specified for the chip, glass, and ACF factors and a 2³ factorial design is created to determine the appropriate combination of material properties and geometric size. It is found that the glass thickness and the ACF properties significantly affect the thermal deformation of the package, while the chip and glass factors, and the interaction between them, significantly affect the warpage. Regression models are developed to perform a series of surface response simulations. Using the developed statistical tests and regression models, suitable material selection criteria and geometric sizes can be specified to satisfy various reliability considerations in the initial design stage.     

Quality-of-service provisioning and efficient resource utilization in CDMA cellular communications

One of the major challenges in supporting multimedia services over Internet protocol (IP)-based code-division multiple-access (CDMA) wireless networks is the quality-of-service (QoS) provisioning with efficient resource utilization. Compared with the circuit-switched voice service in the second-generation CDMA systems (i.e., IS-95), heterogeneous multimedia applications in future IP-based CDMA networks require more complex QoS provisioning and more sophisticated management of the scarce radio resources. This paper provides an overview of the CDMA-related QoS provisioning techniques in the avenues of packet scheduling, power allocation, and network coordination, summarizes state-of-the-art research results, and identifies further research issues.     

QoS-oriented packet scheduling for wireless multimedia CDMA communications

In the third-generation (and beyond) wireless communication systems, there will be a mixture of different traffic classes, each having its own transmission rate characteristics and quality-of-service (QoS) requirements. In this paper, a QoS-oriented medium access control (MAC) protocol with fair packet loss sharing (FPLS) scheduling is proposed for wireless code-division multiple access (CDMA) communications. The QoS parameters under consideration are the transmission bit error rate (BER), packet loss, and delay requirements. The MAC protocol exploits both time-division and code-division statistical multiplexing. The BER requirements are guaranteed by properly arranging simultaneous packet transmissions and controlling there transmit power levels, whereas the packet loss and delay requirements are guaranteed by proper packet scheduling. The basic idea of FPLS is to schedule the transmission of multimedia packets in such a way that all the users have a fair share of packet loss according to their QoS requirements, which maximizes the number of the served users under the QoS constraints. Simulation results demonstrate effectiveness of the FPLS scheduler, in comparison with other previously proposed scheduling algorithms.     

Polyoxometalates Facilitating Synthesis of Subnanometer Nanowires

Subnanometer nanowires (SNWs) refer to nanowires with diameters close to the size of a single crystal cell. SNWs show not only qualitative change in nature compared to the bulk materials or nanomaterials with larger size but also show several advantages in assembly and processing due to their polymer-analog properties. However, the synthesis of SNWs is still a great challenge. Herein, a synthesis method of SNWs assisted by polyoxometalates is developed. Based on this method, several kinds of SNWs are prepared successfully, and the properties of the SNWs can be regulated efficiently and effectively, demonstrating the extensibility of this synthesis method. Among these SNWs, Bi₂O₃–PMoO SNWs show good photothermal conversion performance and can be processed into freestanding and flexible films through the wet-spinning method. The Bi₂O₃–PMoO SNW films show good performance in solar steam generation and seawater desalination. The average stable evaporation rate can reach 1.38 kg m⁻² h⁻¹, and the efficiency is ≈ 91.1% under 1 sun illumination. The concentration of ions in the desalted seawater with the Bi₂O₃–PMoO SNWs film are reduced by four orders of magnitude, meeting the quality standards of drinking water and potential for practical utilization of solar energy in the seawater desalination.     

3D Printed Stem‐Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds

A bioengineered spinal cord is fabricated via extrusion‐based multimaterial 3D bioprinting, in which clusters of induced pluripotent stem cell (iPSC)‐derived spinal neuronal progenitor cells (sNPCs) and oligodendrocyte progenitor cells (OPCs) are placed in precise positions within 3D printed biocompatible scaffolds during assembly. The location of a cluster of cells, of a single type or multiple types, is controlled using a point‐dispensing printing method with a 200 µm center‐to‐center spacing within 150 µm wide channels. The bioprinted sNPCs differentiate and extend axons throughout microscale scaffold channels, and the activity of these neuronal networks is confirmed by physiological spontaneous calcium flux studies. Successful bioprinting of OPCs in combination with sNPCs demonstrates a multicellular neural tissue engineering approach, where the ability to direct the patterning and combination of transplanted neuronal and glial cells can be beneficial in rebuilding functional axonal connections across areas of central nervous system (CNS) tissue damage. This platform can be used to prepare novel biomimetic, hydrogel‐based scaffolds modeling complex CNS tissue architecture in vitro and harnessed to develop new clinical approaches to treat neurological diseases, including spinal cord injury.     

采用温控和碘吸收池技术的发射激光稳频技术

多普勒测风激光雷达通过分析系统回波信号的多普勒频移反演出风速,为提高风场探测精度,从稳频技术方面展开研究。在稳频过程中,分别采取措施消除激光频率的长期漂移和短期抖动。针对激光频率的长期漂移,设计并研制了种子激光器温控箱,通过水浴的控温方式大大减小了激光频率的长期漂移,将激光频率稳定在±50 MHz以内;针对激光频率的短期抖动,采用以碘分子吸收池为核心器件的稳频系统,通过半导体控温方式对碘分子吸收池精确控温,控温精度达0.03 ℃,提高了稳频精度,将激光频率进一步稳定在±8 MHz以内,满足±10 MHz以内的设计精度要求。通过搭建多普勒测风激光雷达系统,对发射激光稳频装置进行系统验证,连续4组风场观测结果表明:系统探测高度为17 km,绝大部分方差在4 m/s以下,满足测风激光雷达测量指标的要求。