The effects of physical refining on the formation of 3-monochloropropane-1,2-diol esters in relation to palm oil minor components

The formation of 3-monochloropropane-1,2-diol (3-MCPD) esters in refined palm oil during deodorisation is attributed to the intrinsic composition of crude palm oil. Utilising D-optimal design, the effects of the degumming and bleaching processes on the reduction in 3-MCPD ester formation in refined palm oil from poor-quality crude palm oil were studied relative to the palm oil minor components that are likely to be their precursors. Water degumming remarkably reduced 3-MCPD ester formation by up to 84%, from 9.79 mg/kg to 1.55 mg/kg. Bleaching with synthetic magnesium silicate caused a further 10% reduction, to 0.487 mg/kg. The reduction in 3-MCPD ester formation could be due to the removal of related precursors prior to the deodorisation step. The phosphorus content of bleached palm oil showed a significant correlation with 3-MCPD ester formation.     

我国染整业的新一轮发展

Sincereformandopeningtotheoutsideworld,China'stextileindustryhasa chievedrapiddevelopment.Especiallyinrecentyears,wehavewitnessedsignif icantimprovementintermsofvolume,quality,varieties,efficiency,earningsofforeigncurrency,fiberconsumptionper capita,and…     

Complex chain of momentum transfer of body segments in the baseball pitching motion

Abstract

Baseball pitching requires contributions from and interaction among all limb segments. Most previous investigators have concentrated on the throwing arm itself, but the center of mass (COM) and contribution of all segments in the pitching motion have not been studied. The purpose of this study was to investigate the momentum transfer of all body segments in the pitching motion. The kinematics pitching motion data were captured from three experienced pitchers (one is professional, two are amateurs). A ten‐segment body system was modeled in this study. The results showed that the lowest position of the COM during the pitching cycle occurred around the ball release time and the fastest velocity (2.81±0.18 m/sec) of the COM was in the late cocking phase. The trunk and thigh on the throwing side showed the largest linear momentum among all segments in the late cocking phase. The upper throwing arm and forearm had peak linear momentum in the acceleration phase. The trunk also had the largest angular momentum during the pitching cycle and reached the maximum rotational momentum (4.17±1.22 Kg‐m²/sec) in the late cocking phase and medial bending momentum (9.03±5.78 Kg‐m²/sec) at the end of the late cocking phase. From the time sequence of linear momentum changes, especially in the leading direction, the force transfer from the foot to the trunk then through the upper extremity during the pitching motion was identified. The largest change rate of angular momentum found in the trunk meant that the trunk contributed the largest torque in the pitching motion. Better coordination of the body segments in the pitching motion not only enhances performance but also avoids injury. The coordination of motion by athletes in the pitching motion provides a guideline for better coaching and training.     

Optimal Cartesian product files for orthogonal range queries

Abstract

This paper will propose a record organization strategy to construct optimal Cartesian product files for orthogonal range retrieval. The relationship between an optimal Cartesian product file (CPF) for range retrieval and an optimal CPF for partial match retrieval will be explored.     

Wireless link prediction and triggering using modified Ornstein–Uhlenbeck jump diffusion process

Through time domain observation, typical wireless signal strength values seems to exhibit some forms of mean-reverting and discontinuous “jumps” behaviour. Motivated by this fact, we propose a wireless link prediction and triggering (LPT) technique using a modified mean-reverting Ornstein–Uhlenbeck (OU) jump diffusion process. The proposed technique which we refer as OU-LPT is an integral component of wireless mesh network monitoring system developed by ICT FP7 CARrier grade wireless MEsh Network project. In particular, we demonstrate how this technique can be applied in the context of wireless mesh networks to support link switching or handover in the event of predicted link degradation or failure. The proposed technique has also been implemented and evaluated in a real-time experimental testbed. The results show that OU-LPT technique can significantly enhance the reliability of wireless links by reducing the rate of false triggers compared to a conventional linear prediction technique and therefore offers a new direction on how wireless link prediction, triggering and switching process can be conducted in the future.     

Synthesis of Radiolabeled Fullerenes C60 and C70

Abstract

The synthesis of radiolabeled C₆₀/C₇₀ for potential biochemical tracer studies was carried out. Vaporization under plasma are conditions (~3000C) of graphite rods impregnated with the ¹⁴C labeled steroid progesterone generates the expected C₆₀/C₇₀ mixture. Isolation and characterization of the ¹⁴C-C₆₀ is reported. Interestingly, the C₇₀ had more radioactivity than the C₆₀.     

Novel association control strategies for multicasting in relay-enabled WLANs

Multicast is a fundamental communication service in Wireless Local Area Networks (WLANs). Unfortunately, multicast packets are transmitted at the base rate needlessly, which prevents rich multimedia contents from being delivered to users. To this end, a number of prior studies have proposed to increase multicast capacity whereby an Access Point (AP) transmits at the highest data rate that can be decoded by all subscribers. Another approach is by controlling subscriber-AP associations such that a given objective, e.g., AP load, is met. Moreover, they have also proposed using relays to help boost stations with weak channel condition. In this paper, we propose an approach that exploits association control, high number of APs and relays simultaneously to improve the performance of multicast in WLANs. We show that the problem is NP-hard by reducing it from the Maximum Coverage with Group Budget (MCG) problem. We then propose a number of heuristics that consider two types of relays: non-subscribers and subscribers. The former are stations that are not part of any multicast groups whereas the latter comprise of stations that are actively receiving multicast packets. Our extensive simulation studies with varying APs, station numbers, and multicast transmission rates show the efficacy of our heuristics in reducing the average and maximum AP load, and are able to support a higher number of users at high multicast rates. Specifically, they result in up to 83% reduction in AP load, and support up to 17% and 53% more users in low and high rate multicast scenarios respectively.     

Hydraulic characteristics and startup of anaerobic rotating biological contactors

Abstract

In this study the hydraulic characteristics and the start‐up of anaerobic rotating biological contactor (AnRBC) were investigated experimentally and theoretically. Results of tracer study showed that the AnRBC reactor is a well‐mixed reactor in the first and second stages. Start‐up of the AnRBC reactor was successfully carried out using high strength synthetic wastewaters at hydraulic retention time of 21.6 hours, organic surface loading of 111.4 g‐COD/m²?d, organic volumetric loading of 13.33 Kg‐COD/m³?d, disk rotational speed of 12 rpm and 100% disk submergence. In the steady‐state operating condition, the removal efficiencies of soluble COD and BOD could be up to 71% and 76% for the inlet COD and BOD concentrations of 12,000 and 7,267 mgL^‐1, respectively. The microscopic observations after start‐up of the AnRBC reactor showed that the acetogenic bacteria are significant in the first two stages while the methanogenic bacteria predominate in the last two stages.