沥青路面摊铺时温度场时空分布特性

沥青路面摊铺过程中由于受各种环境因素的影响,沥青混合料温度以及周围温度的变化是复杂多变的.以侯运高速公路沥青路面表面层摊铺施工为背景,实测了沥青路面摊铺过程中路面周围不同空间、不同时间的温度情况,揭示了沥青路面摊铺时路面周围温度场的时空分布特性,对于沥青路面摊铺施工质量控制有着重要的借鉴意义.     

Calculating the elastic moduli of steel-fiber reinforced concrete using a dedicated empirical formula

The equivalent inclusion method (EIM) is adopted to study the characteristics of the equivalent material properties of steel-fiber reinforced concrete as a function of the volume fraction and the length to diameter ratio of the fibers. It is found that the equivalent material moduli of concrete reinforce with randomly orientated and distributed fibers are insensitive to the length to diameter ratio of the steel fibers. A set of empirical formulae is then proposed for the purposes of engineering applications. The proposed empirical model can simplify the calculation of the equivalent material moduli. Verifications of the proposed empirical formulae with the EIM model and with experimental data are performed with two examples. The first is a compression test. The second is 4 point bending test. The empirical formulae, based on the equivalent inclusion method proposed in this study, represent an alternative means of quickly calculating the effective elastic modulus of steel-fiber reinforced concrete materials.     

Modeling of Subsidence and Reservoir Compaction under Waterflood Operations

A full-field, three-dimensional (3D) computer model has been developed to numerically simulate reservoir compaction and surface subsidence for a weak, water-sensitive, hydrocarbon reservoir during field-wide water-injection operations. The developed model was used for modeling the compaction and subsidence processes under waterflood operations at the Ekofisk Field in the North Sea. The model was thoroughly validated through the comparison of model results to extensive field measurements with good agreement being achieved. The validated model has been successfully employed as a tool to forecast subsidence and to assist in the development of a subsidence risk assessment. For practical field applications, important quantitative information, that includes reservoir compaction, seafloor subsidence, and seafloor horizontal movement, may be generated from the full-field, 3D model and is presented in this paper.     

Editorial

Higher-Order and Symbolic Computation -     

Modeling and control for a Gough‐Stewart platform CNC machine

In this paper, a complete dynamic model on task space for a 6 degrees of freedom (DOF) Gough‐Stewart platform‐type computer numerical control (CNC) machine is derived. The rotation terms of the legs are included for those inertia effects cannot be negligible in the machine tool applications. The formulation derived by means of the Euler‐Lagrange method is convenient for designing the adaptive control law. Also, the average‐type force model for end milling process is derived and included in the dynamic model and control. A composite adaptive control scheme is developed by use of filtering dynamics technique. An appropriate estimator gain is designed in the parameter adaptation law that is useful for estimating the selected important cutting parameters. Experimental results verify the proposed adaptive control scheme can achieve good tracking performance. © 2004 Wiley Periodicals, Inc.     

A hybrid rough-cut process planning for quality

This paper proposes a hybrid approach to develop a rough-cut process planning for quality. The approach aims to determine key process alternatives with an adequate process capability by systematic quality planning and assessment methods during the initial planning stage of the product development cycle. It consists of four steps: (1) identification of quality characteristics (2) planning of the process quality by combining quality function deployment (QFD) with the process failure mode and effect analysis (FMEA) (3) a selection of process alternatives, and (4) an assessment of process quality through a quality measure index, called the composite process capability (CCP). The process alternatives with an adequate CCP selected during the early design stage can then be not only used as the guidelines for detailed process planning but also as feedback for the product design and other functions for design evaluation and improvement. This approach is helpful to reduce or even eliminate the iterations of modification of process plans. A prototype system called the rough-cut process planning for quality (RPPFQ) has been developed for validation. A case study concerned with a satellite frame part is presented to illustrate the approach and prototype system in this paper.     

Complex chain of momentum transfer of body segments in the baseball pitching motion

Abstract

Baseball pitching requires contributions from and interaction among all limb segments. Most previous investigators have concentrated on the throwing arm itself, but the center of mass (COM) and contribution of all segments in the pitching motion have not been studied. The purpose of this study was to investigate the momentum transfer of all body segments in the pitching motion. The kinematics pitching motion data were captured from three experienced pitchers (one is professional, two are amateurs). A ten‐segment body system was modeled in this study. The results showed that the lowest position of the COM during the pitching cycle occurred around the ball release time and the fastest velocity (2.81±0.18 m/sec) of the COM was in the late cocking phase. The trunk and thigh on the throwing side showed the largest linear momentum among all segments in the late cocking phase. The upper throwing arm and forearm had peak linear momentum in the acceleration phase. The trunk also had the largest angular momentum during the pitching cycle and reached the maximum rotational momentum (4.17±1.22 Kg‐m²/sec) in the late cocking phase and medial bending momentum (9.03±5.78 Kg‐m²/sec) at the end of the late cocking phase. From the time sequence of linear momentum changes, especially in the leading direction, the force transfer from the foot to the trunk then through the upper extremity during the pitching motion was identified. The largest change rate of angular momentum found in the trunk meant that the trunk contributed the largest torque in the pitching motion. Better coordination of the body segments in the pitching motion not only enhances performance but also avoids injury. The coordination of motion by athletes in the pitching motion provides a guideline for better coaching and training.     

Optimal Cartesian product files for orthogonal range queries

Abstract

This paper will propose a record organization strategy to construct optimal Cartesian product files for orthogonal range retrieval. The relationship between an optimal Cartesian product file (CPF) for range retrieval and an optimal CPF for partial match retrieval will be explored.     

Wireless link prediction and triggering using modified Ornstein–Uhlenbeck jump diffusion process

Through time domain observation, typical wireless signal strength values seems to exhibit some forms of mean-reverting and discontinuous “jumps” behaviour. Motivated by this fact, we propose a wireless link prediction and triggering (LPT) technique using a modified mean-reverting Ornstein–Uhlenbeck (OU) jump diffusion process. The proposed technique which we refer as OU-LPT is an integral component of wireless mesh network monitoring system developed by ICT FP7 CARrier grade wireless MEsh Network project. In particular, we demonstrate how this technique can be applied in the context of wireless mesh networks to support link switching or handover in the event of predicted link degradation or failure. The proposed technique has also been implemented and evaluated in a real-time experimental testbed. The results show that OU-LPT technique can significantly enhance the reliability of wireless links by reducing the rate of false triggers compared to a conventional linear prediction technique and therefore offers a new direction on how wireless link prediction, triggering and switching process can be conducted in the future.