Ambient and high-temperature thermal conductivity of thermal sprayed coatings

Aside from its importance as a design parameter for thermal barrier coatings, measuring thermal conductivity of thermal sprayed coatings itself provides a unique method to critically characterize the nature, quantity, and anisotropy of the defect morphologies in these splat-based coatings. In this paper, the authors present a systematic assessment of thermal conductivity of wide range using the flash diffusivity technique. For the case of plasma sprayed yttria-stabilized zirconia (YSZ), coatings obtained from wide-ranging initial powder morphologies as well as those fabricated under different particle states were characterized. Both in-plane and through-thickness properties were obtained. Other material systems that were considered include: metallic alloys and semiconductors of interests. Issues such as reproducibility and reliability in measurements were also considered and assessed. Finally, work in collaboration with the Oak Ridge National Laboratory (ORNL) for alternate approaches to characterization of thermal conductivity as well as high-temperature measurements was performed. This article was originally published inBuilding on 100 Years of Success, Proceedings of the 2006 International Thermal Spray Conference (Seattle, WA), May 15–18, 2006, B.R. Marple, M.M. Hyland, Y.-Ch. Lau, R.S. Lima, and J. Voyer, Ed., ASM International, Materials Park, OH, 2006.     

聚乙烯加工流变改性剂对LLDPE／HDPE流变性能的影响

本文介绍在ＬＬＤＰＥ（７０４７）／ＨＤＰＥ（６０９８）共混物（重量比为９０：１０）中加０．５％、１．０％、１．３％、１．５％、２％的聚乙烯加工流变改性剂，采ＸＬＹ－Ⅱ型毛细管流变仪测其流变性能。结果表明，加入ＱＬＹ树脂后，该本系的剪切速率增，表观粘度下降，活化降低，熔体乃属假塑性流体。     

The compatibility of the blends of PUs with PVC and the adhesion behavior of PU to PVC

Three series of polyurethane adhesives—polyethyleneadipateurethane (PEAU), polybuthyleneadipateurethane (PBAU), and polyhexyleneadipateurethane (PHAU)—with the same MW and hard/soft segment ratio, based on the three polyesters polyethyleneadipate (PEA), polybuthyleneadipate (PBA), polyhexyleneadipate (PHA), with 4,4′-diphnylmethane diisocyanate (MDI), and butendiol were synthesized by solution polymerization. The crystallinity of these polyesters and polyurethanes (PUs) and the compatibility of blends of PUs with PVC were studied by means of wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), dynamic thermomechanical analysis (DMA), testing of solubility, and phase contrast microscopy. The results indicated that PBAU/PVC and PHAU/PVC were compatible systems, but PEAU/PVC was incompatible. The adhesive strengths of the three adhesives were quite different from one another, in the order of PBAU ≥ PHAU ? PEAU. The influences of crystallinity and compatibility on adhesion were discussed, and the Diffusion Theory for PU-PVC systems was recommended. © 1995 John Wiley & Sons, Inc.     

一种适用于降压DC-DC的改进型电流检测电路

基于电流模式控制能够较好地改善DC-DC的性能,设计一种适用于降压DC-DC的改进型电流检测电路,所提出的电流检测电路提高了电流感应的速度和精度。通过对电路的理论分析与设计,采用SMIC 0.18μm CMOS工艺模型,利用Cadence工具对电路进行仿真验证,所提出的电流检测电路在负载电流为50 mA~500 mA时都能够达到96%的效率以及小于40 ns的建立时间。在开关频率为2 MHz时,输入电压范围为2.5 V~4.2 V,所需电感值为4.7μH,电容值为10μF,输出电压纹波小于18 mV。     

自适应混合多目标分布估计进化算法

针对多目标分布估计算法全局收敛性较弱的缺陷,提出了一种自适应混合多目标分布估计进化算法。其基本思想是:在多目标分布估计算法中引入全局收敛性较强的差分进化算法,当函数变化率较大时,用分布估计算法产生新种群;当函数变化率较小即算法可能陷入局部收敛时,用差分进化算法产生新种群。理论分析和数值实验结果表明,这种混合算法不仅具有良好的全局收敛性,而且解的分布性和均匀性较没有考虑目标函数变化率的混合多目标分布估计算法也有了一定程度的提高。     

影响裂解汽油二段加氢催化剂长周期运转因素及解决措施

从裂解汽油二段加氢催化剂性能、裂解汽油和操作条件等方面论述了影响该催化剂长周期运转的因素,并针对这些因素提出相应的措施,以达到延长催化剂运转周期的目的。     

S2/TDE85复合材料耐自然库存与加速湿热老化的性能研究

本文对高强2号玻璃纤维（S2）增强环氧（TDE85－MCD体系）基复合材料单向板经自然库存与加速湿热老化后力学性能的变化进行了研究。研究结果表明，温度和湿度的作用会使单向板的拉伸、弯曲、剪切性能有所降低；温度越高、湿度越大，力学性能变化越大；可用加速湿热试验值来表征自然库存条件下的试验值。     

Influence of initial chain conformation on the formation of mesoglobule phase in a dilute heteropolymer solution

We have observed, for the first time, that when the initial chain conformation changed from coil to globule, the association of linear poly(N-vinylcaprolactam-co-sodium acrylate) chains could gradually change from a reaction limited to diffusion limited process, reflected in a change of the fractal dimension of the resultant aggregates from ∼2.5 to ∼1.6. Such an influence of the initial chain conformation has been overlooked in past studies of the formation of the mesoglobule phase in a dilute heteropolymer solution.     

南阳直馏柴油碱洗乳化的原因及对策

分析了南阳石蜡精细化工厂直馏柴油碱洗乳化的原因，介绍了该厂直馏柴油碱洗抗乳化措施，这些措施包括：优化操作参数，加强生产管理，深度碱洗柴油轻组分然后轻、重组分混合出厂。这些措施的综合应用彻底解决了南阳石蜡精细化工厂直馏柴油碱洗乳化的问题，又保证了柴油收率。     

花岗岩残积土-土工格栅界面的后循环剪切行为研究

花岗岩残积土在华南、东南沿海、南岳、新疆等地区广泛分布,前人的研究多集中在结构性及微观特性上,后循环加载、位移演化、土壤密度等因素对筋-土界面的剪切特性及加筋作用效果的影响评估研究较少。从循环试验剪切刚度这一重要参数入手,以加载次数、加载频率值、位移振幅值、土壤重度值为自变量,应用控制变量法,通过设计循环直剪试验,得到加筋花岗岩残积土的剪切应力与剪切位移、垂直位移与剪切位移关系曲线进行观察对比,结果表明:花岗岩残积土土工格栅界面剪切刚度受位移半振幅、土壤干重度影响很大,受加载频率影响很小,循环加载并没有弱化后循环界面剪切强度,剪切位移与位移半振幅呈负相关关系。