固移无线网络融合实现技术浅析

FMC是当前运营商应对市场竞争的有效手段,是电信网络未来的发展方向,也是备受业界关注的热点话题。本文介绍了业内普遍认可的两种FMC实现方式UMA(Unlicensed Mobile Access,非授权移动接入)和IMS(IP Multimedia Subsystem,IP多媒体子系统),特别提到了SIP(Session Initiation Protocol,初始会话协议)信令协议,对每种实现方式架构、原理、优缺点进行探讨,并总结了FMC实现方式未来的技术发展趋势。     

压缩冬季直埋光缆线路障碍抢修历时的措施

冬季直埋光缆线路障碍抢修,最困难的问题就是冻土挖掘。本文通过对破碎机、混凝土链锯工作性能的分析,得出了利用破碎机、混凝土链锯进行冻土挖掘可提高冻土挖掘速度,大幅度压缩冬季直埋光缆线路障碍抢修历时的结论。     

自行榴弹炮身管主动冷却效率的影响因素

分析了火炮发射时身管热传递过程的三个连续阶段——热输入、热存储和热输出，指出了影响冷却效率的因素包括影响非稳态导热过程的因素和影响热交换过程的因素。研究了对流传热系数h、身管壁厚δ及身管材料导热系数λ各自对冷却效率的作用规律以及三者不同组合对冷却效率的影响。研究结果表明，在身管材料一定情况下．合理优化h、δ组合对兼顾冷却效率、强度、质量、尺寸及制造工艺性有重要意义。     

A 10-Transistor 65 nm SRAM Cell Tolerant to Single-Event Upsets

A novel SRAM cell tolerant to single-event upsets (SEUs) is presented in this paper. By adding four more transistors inside, the proposed circuit can obtain higher critical charge at each internal node compared to the conventional 6-transistor (6T) cell. Arrays of 2k-bit capacitance of these two designs were implemented in a 65 nm CMOS bulk technology for comparison purpose. Radiation experiments showed that, at the nominal 1.0 V supply voltage, the proposed cell achieves 47.1 % and 49.3 % reduction in alpha and proton soft error rates (SER) with an area overhead of 37 %.     

一种用于大空域靶弹的高度控制系统优化设计方法

作为多用途的靶弹,必须在大空域平飞.针对研究对象,在高度控制系统设计中,引入多目标多约束的随机射线优化方法.在约束条件一定的情况下,合理选择俯仰角稳定回路和高度稳定回路控制参数以及各种程序指令信号的大小和工作时间,使得靶弹的上升时间最短,超调量接近于零.全弹道仿真结果表明,用这种优化方法所设计的高度控制系统能成功实现所要求的大空域平飞.     

基于因特网的液压系统远程控制的基础研究

本文以液压系统为被控对象,对在因特网环境下的远程控制系统提出了具有挑战性的研究.仿真及实验结果表明,采用适当的补偿器结构和时延预测算法可以比较好地解决因特网在传递控制信息时的时延及时延的不确定性对液压远程控制系统的影响,使采用因特网的机械运动的远程控制成为可能.本文还提出了实现这种远程控制时需要对远程端采样信息进行适当的处理;为保证在相同的网络条件下进行实验研究,需要构筑能对因特网网络时延及时延的不确定性进行再现的因特网远程控制实验系统.     

武器装备故障诊断专家系统平台的初步设计

介绍了专家系统平台的概念及在军事领域中应用的意义.详细描述了建立专家系统平台的知识表示和推理方式等关键内容.提出了一种多知识表示、多推理方式的故障诊断专家系统平台.     

Self‐Powered Trajectory,Velocity, and Acceleration Tracking of a Moving Object/Body using a Triboelectric Sensor

Motion tracking is of great importance in a wide range of fields such as automation, robotics, security, sports and entertainment. Here, a self‐powered, single‐electrode‐based triboelectric sensor (TES) is reported to accurately detect the movement of a moving object/body in two dimensions. Based on the coupling of triboelectric effect and electrostatic induction, the movement of an object on the top surface of a polytetrafluoroethylene (PTFE) layer induces changes in the electrical potential of the patterned aluminum electrodes underneath. From the measurements of the output performance (open‐circuit voltage and short‐circuit current), the motion information about the object, such as trajectory, velocity, and acceleration is derived in conformity with the preset values. Moreover, the TES can detect motions of more than one objects moving at the same time. In addition, applications of the TES are demonstrated by using LED illuminations as real‐time indicators to visualize the movement of a sliding object and the walking steps of a person.