This study used different metals to modify Rh/Al2O3 catalysts for NO reduction in a simulated waste incineration flue gas containing 6% O2. The characteristics of the modified catalysts were analyzed using BET, TEM and XRD. The results of the experiment reveal that Na addition can significantly affect the properties of Rh/Al2O3 catalysts on the BET surface area and Rh metal dispersion. Furthermore, Na addition was found to significantly enhance the NO conversion of Rh/Al2O3 at 250–350 °C. On the contrary, Cu, Ni, and Co addition was found to have slight suppression effects. 相似文献
When a horizontal homogeneous solid is melted from below, convection can be induced in a thermally unstable melt layer. In
this study the onset of buoyancy-driven convection during time-dependent melting is investigated by using similarly transformed
disturbance equations. The critical Rayleigh numbers based on the melt-layer thickness are found numerically for various conditions.
For small superheats, the present predictions approach the well known results of classical Rayleigh-Bénard problems, that
is, critical Rayleigh numbers are located between 1,296 and 1,708, regardless of the Prandtl number. However, for high superheats
the critical Rayleigh number increases with an increase in phase change rate but with decrease in Prandtl number. 相似文献
Polycylic aromatic hydrocarbons (PAHs) are listed as carcinogenic and mutagenic priority pollutants, belonging to the environmental endocrine disrupters. Most PAHs in the environment stem from the atmospheric deposition and diesel emission. Consequently, the elimination of PAHs in the off-gases is one of the priority and emerging challenges. Catalytic oxidation has been widely used in the destruction of organic compounds due to its high efficiency (or conversion of reactants), its economic benefits and good applicability.
This study investigates the application of the catalytic oxidation using Pt/γ-Al2O3 catalysts to decompose PAHs and taking naphthalene (the simplest and least toxic PAH) as a target compound. It studies the relationships between conversion, operating parameters and relevant factors such as treatment temperatures, catalyst sizes and space velocities. Also, a related reaction kinetic expression is proposed to provide a simplified expression of the relevant kinetic parameters.
The results indicate that the Pt/γ-Al2O3 catalyst used accelerates the reaction rate of the decomposition of naphthalene and decreases the reaction temperature. A high conversion (over 95%) can be achieved at a moderate reaction temperature of 480 K and space velocity below 35,000 h−1. Non-catalytic (thermal) oxidation achieves the same conversion at a temperature beyond 1000 K. The results also indicate that Rideal–Eley mechanism and Arrhenius equation can be reasonably applied to describe the data by using the pseudo-first-order reaction kinetic equation with activation energy of 149.97 kJ/mol and frequency factor equal to 3.26 × 1017 s−1. 相似文献
In this paper, we consider identifying the minimum effective dose (MED) in a dose-response study when survival data are subject to random right-censorship, where the MED is defined to be the smallest dose level under study that has survival advantage over the zero-dose control. To this end, we suggest single-step-down testing procedures based on three different types of weighted logrank statistics, respectively. The comparative results of a Monte Carlo error rate and power/bias study for a variety of survival and censoring distributions are then presented and discussed. The application of the testing procedures for identifying the MED is finally illustrated by using a numerical example of prostate cancer data. 相似文献
The following letter presents a study regarding GaN-based light-emitting diodes (LEDs) with p-type AlGaN electron blocking layers (EBLs) of different thicknesses. The study revealed that the LEDs could endure higher electrostatic discharge (ESD) levels as the thickness of the AlGaN EBL increased. The observed improvement in the ESD endurance ability could be attributed to the fact that the thickened p-AlGaN EBL may partly fill the dislocation-related pits that occur on the surface of the InGaN-GaN multiple-quantum well (MQW) and that are due to the strain and the low-temperature-growth process. If these dislocation-related pits are not partly suppressed, they will eventually result in numerous surface pits associated with threading dislocations that intersect the InGaN-GaN (MQW), thereby reducing the ESD endurance ability. The results of the experiment show that the ESD endurance voltages could increase from 1500 to 6000 V when the thickness of the p-AlGaN EBL in the GaN LEDs is increased from 32.5 to 130 nm, while the forward voltages and light output powers remained almost the same. 相似文献
The execution of a client/server application involving database access requires a sequence of database transaction events (or, T-events), called a transaction sequence (or, T-sequence). A client/server database application may have nondeterministic behavior in that multiple executions thereof with the same input may produce different T-sequences. We present a framework for testing all possible T-sequences of a client/server database application. We first show how to define a T-sequence in order to provide sufficient information to detect race conditions between T-events. Second, we design algorithms to change the outcomes of race conditions in order to derive race variants, which are prefixes of other T-sequences. Third, we develop a prefix-based replay technique for race variants derived from T-sequences. We prove that our framework can derive all the possible T-sequences in cases where every execution of the application terminates. A formal proof and an analysis of the proposed framework are given. We describe a prototype implementation of the framework and present experimental results obtained from it. 相似文献
An experimental study was conducted to investigate the rheological behavior of a heterogeneous polymer blend system consisting of nylon 6 and an ethylene-based multifunctional polymer (CXA 3101, DuPont Co.). For comparison purposes, we also investigated the rheological behavior of two additional blend systems, namely blends of nylon 6 with a chemically modified polyolefin (Plexar 3, Chemplex Co.) and blends of nylon 6 with ethylene–vinyl acetate copolymer (EVA). We have investigated the thermal and thermomechanical behavior of the blend systems, using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Also, we have attempted to identify the chemical structure of the functional groups present in the CXA 3101 and Plexar 3 resins, using infrared (IR) spectroscopy. This information has enabled us to interpret the observed rheological behavior. Furthermore, we have used both optical and scanning electron microscopies to investigate the state of dispersion of the constituent components in each of the blend systems. We have concluded that, during melt blending, chemical reactions have taken place between carboxyl or anhydride groups present in the CXA 3101 resin and the amino end groups of the nylon 6, forming a graft copolymer which then acted as an “interfacial agent.” 相似文献