Performance analysis of two-branch transmit diversity block-coded OFDM systems in time-varying multipath Rayleigh-fading channels

Based on Alamouti code, Lee and Williams proposed two-branch transmit diversity block-coded orthogonal frequency-division multiplexing (TDBC-OFDM) systems, namely, space-time block-coded OFDM (STBC-OFDM) and space-frequency block-coded OFDM (SFBC-OFDM). However, they employed the simple maximum-likelihood (SML) detector, which was designed under the assumption that the channel is static over the duration of a space-time/frequency codeword. Therefore, STBC-OFDM/SFBC-OFDM suffers from the high time/frequency selectivity of the wireless mobile fading channel. In this paper, besides the original SML detector, three detectors proposed by Vielmon et al. are applied to improve the two-branch TDBC-OFDM systems. Additionally, assuming sufficient cyclic prefix, the performances of all systems in spatially uncorrelated time-varying multipath Rayleigh-fading channels are evaluated by theoretical derivation and computer simulation, as well. According to the derived bit-error rate (BER), we further derive the bit-error outage (BEO) to provide a more object judgment on the transmission quality within a fading environment. Numerical results have revealed that significant performance improvement can be achieved even when the systems are operated in highly selective channels.     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Nondestructive evaluation of corrosion by fractal geometry

Fractal geometry is finding its application in the nondestructive evaluation (NDE) of corrosion by characterizing the corrosion surface with fractal dimensions. It was found that corrosion surfaces can be well described by multifractals. Two algorithms were used to obtain the fractal dimensions of a corroded aluminum alloy surface, one being box-counting and another being coherent light scattering. Fractal dimensions were related with the damage caused by corrosion and fatigue.     

Handwritten word recognition with character and inter-characterneural networks

An off-line handwritten word recognition system is described. Images of handwritten words are matched to lexicons of candidate strings. A word image is segmented into primitives. The best match between sequences of unions of primitives and a lexicon string is found using dynamic programming. Neural networks assign match scores between characters and segments. Two particularly unique features are that neural networks assign confidence that pairs of segments are compatible with character confidence assignments and that this confidence is integrated into the dynamic programming. Experimental results are provided on data from the U.S. Postal Service.     

Hydrogen peroxide in exhaled air is increased in stable asthmatic children

Exhaled air condensate provides a noninvasive means of obtaining samples from the lower respiratory tract. Hydrogen peroxide (H2O2) in exhaled air has been proposed as a marker of airway inflammation. We hypothesized that in stable asthmatic children the H2O2 concentration in exhaled air condensate may be elevated as a result of airway inflammation. In a cross-sectional study, 66 allergic asthmatic children (of whom, 41 were treated with inhaled steroids) and 21 healthy controls exhaled through a cold trap. The resulting condensate was examined fluorimetrically for the presence of H2O2. All subjects were clinically stable, nonsmokers, without infection. The median H2O2 level in the exhaled air condensate of the asthmatic patients was significantly higher than in healthy controls (0.60 and 0.15 micromol, respectively; p<0.05), largely because of high values in the stable asthmatic children who did not use anti-inflammatory treatment (0.8 micromol; p<0.01 compared to controls). We conclude that hydrogen peroxide is elevated in exhaled air condensate of children with stable asthma, and may reflect airway inflammation.     

Assessment of renal osteodystrophy in dialysis patients: use of bone alkaline phosphatase, bone mineral density and parathyroid ultrasound in comparison with bone histology

Bone biopsies were studied in 73 patients to determine if a two-site radioimmunometric assay for serum bone alkaline phosphatase (BAP), total serum alkaline phosphatase (ALP), serum intact parathyroid hormone (iPTH), hand X-rays, regional bone mineral density (BMD) measurements and parathyroid enlargement detected by ultrasonography could accurately predict renal osteodystrophy. In the patients studied 57 had hyperparathyroid bone disease, 4 mixed renal osteodystrophy, 3 adynamic bone disease, 1 osteomalacia and 8 normal histology. Serum BAP, ALP and iPTH correlated positively with mineral apposition rate, osteoblastic, osteoid and eroded surface. In the diagnosis of hyperparathyroid bone disease serum iPTH was the most sensitive investigation, detecting 81% of patients at a level > 100 pg/ml but with a specificity of only 66%. Serum BAP was more sensitive, 70% at a level of > 10 ng/ml, than serum total ALP, 30% at a level of 300 IU/l, with similar specificities, 92 and 100%, respectively. Ultrasound detection of an enlarged parathyroid gland had a sensitivity of 64% and a specificity of 100% for the diagnosis of hyperparathyroid bone disease. Hand X-rays had a poor sensitivity, 47%, but a high specificity, 92%, for the detection of hyperparathyroid bone disease. The majority of patients had regional BMD values within the normal reference range and this test was of poor discriminatory value. The non-invasive markers were unable to distinguish between patients with low turnover, mild hyperparathyroidism and patients with normal histology. In conclusion the measurement of serum iPTH is a useful screening tool for the detection of hyperparathyroid bone disease which can be confirmed by the finding of a raised serum BAP or parathyroid enlargement. For definitive diagnosis, however, the gold standard remains bone biopsy and at present one cannot recommend any non-invasive method as an adequate substitute.     

Tunnel stability and arching effects during tunneling in soft clayey soil

A series of centrifuge model tests and numerical simulations of these tests were carried out to investigate the surface settlement troughs, excess pore water pressure generation, tunnel stability and arching effects that develop during tunneling in soft clayey soil. The two methods were found to provide consistent results of the surface settlement troughs, excess pore water generation, and the overload factors at collapse for both single and parallel tunneling. The arching ratio describes the evolution of the arching effects on the soil mass surrounding tunnels and can be derived from the numerical analysis. The boundaries of the arching zones for both single tunneling and parallel tunneling were determined. In addition, the boundaries of the positive and negative arching zones were also proposed.     

Line balancing in a just-in-time production environment: balancing multiple U-lines

The introduction of multiple, independent production lines has helped many firms to increase their production flexibility, provide for redundancy when equipment breaks down, reduce idle time and labor costs, and achieve many other benefits. This paper introduces and formalizes the multiple U-line balancing problem. Optimal solution methodologies are provided for Type I (minimize the number of stations for a given cycle time), Type II (minimize the cycle time for a given number of stations), and cost-minimization line-balancing problems. A branch-and-bound algorithm is also developed for the situation in which equipment requirements are dependent on the line configuration and the task assignment to stations. Computational results indicate that the greatest benefit of exploiting multiple lines occurs for smaller cycle-time problems that require higher output.