二合一芯片

由于整合开关器件与反并联二极管这一概念具有难以攻克的技术挑战,因此近年来这一技术仅被用于低功率组件（如IGBT和MOSFET）以及特殊应用。另外,IGCT等大面积双极型器件已经采用了单片集成技术,但其中的IGCT和二：极管需要完全分离的硅区。     

Temperature dependence of resistivity for thermally diffused V3Si multilayer films

Results concerning V₃Si films produced by a simple annealed multilayer technique are reported together with X-ray diffraction patterns, Auger spectroscopy, and Rutherford backscattering analysis. Low-temperature electrical resistivity measurements are discussed. It is found that the V₃Si films exhibit aT ² dependence in the temperature rangeT _c T23 K and aT ^2.6 dependence in the rangeT _c T40 K. The normal-state resistivity in the whole temperature range (T _c T600 K) is analyzed in the framework of Cote-Meisel theory. Consistent values of the saturation resistivity _m and of the Debye temperature are obtained by fitting the experimental data with the Cote-Meisel expression for (T).     

A study on the stability of superconducting YBa2Cu3O7−x phase

The thermal stability of the superconducting phase of nominal composition YBa₂Cu₃O_7–x -sintered pellets has been studied with respect to different temperatures (ranging from 300 to 950° C), time (ranging from 1 to 72 h), oxygen partial pressure (from 4 Pa to 1 atm) and carbon dioxide partial pressure (from 10^–4 Pa to 1 atm). Annealed samples were characterized by X-ray diffraction analysis, optical microscopy, and resistive measurements of the superconductive transition temperature. A stability field of the orthorhombic and tetragonal phases was obtained, showing a region of coexistance. The decomposition of the 1 2 3 phase is found to be strongly influenced by the presence of a small amount of CO₂ (1 p.p.m.) in the sintering atmosphere. A sintering process is proposed to avoid the formation of by-products.     

Film Blowing of Biodegradable Polymer Nanocomposites for Agricultural Applications

Films for agricultural applications, such as greenhouses films or mulching films are generally made of polyolefins such as linear low-density polyethylene (LLDPE) or low-density polyethylene. However, the use of biodegradable and/or compostable polymers is increasing, which enjoy the additional advantage that they can be left on the site since a fine life would be gradually assimilated to the underlying soil. Nevertheless, biodegradable polymeric films often do not have suitable mechanical performances. In this work, biodegradable polymer-based nanocomposite films are prepared by film blowing and compared with traditional LLDPE based nanocomposites. In particular, a biodegradable polymer blend and two different inorganic nanofillers (an organo-modified clay and a calcium carbonate with a hydrophobic coating) are used for the preparation of the nanocomposites. A detailed investigation of obtained materials is performed through rheological, mechanical, and optical characterizations. Adding nanofillers led to an increase of rigidity and tear strength of blown films without negatively affecting their ductility.     

Easy Preparation of Liposome@PDA Microspheres for Fast and Highly Efficient Removal of Methylene Blue from Water

Mussel-inspired chemistry was usefully exploited here with the aim of developing a high-efficiency, environmentally friendly material for water remediation. A micro-structured material based on polydopamine (PDA) was obtained by using liposomes as templating agents and was used for the first time as an adsorbent material for the removal of methylene blue (MB) dye from aqueous solutions. Phospholipid liposomes were made by extrusion and coated with PDA by self-polymerization of dopamine under simple and mild conditions. The obtained Liposome@PDA microspheres were characterized by DLS and Zeta potential analysis, TEM microscopy, and FTIR spectroscopy. The effects of pH, temperature, MB concentration, amount of Liposome@PDA, and contact time on the adsorption process were investigated. Results showed that the highest adsorption capacity was obtained in weakly alkaline conditions (pH = 8.0) and that it could reach up to 395.4 mg g⁻¹ at 298 K. In addition, adsorption kinetics showed that the adsorption behavior fits a pseudo-second-order kinetic model well. The equilibrium adsorption data, instead, were well described by Langmuir isotherm. Thermodynamic analysis demonstrated that the adsorption process was endothermic and spontaneous (ΔG⁰ = −12.55 kJ mol⁻¹, ΔH⁰ = 13.37 kJ mol⁻¹) in the investigated experimental conditions. Finally, the applicability of Liposome@PDA microspheres to model wastewater and the excellent reusability after regeneration by removing MB were demonstrated.     

Dye‐Doped Polyhedral Oligomeric Silsesquioxane (POSS)‐Modified Polymeric Matrices for Highly Efficient and Photostable Solid‐State Lasers

Here, the design, synthesis, and characterization of laser nanomaterials based on dye‐doped methyl methacrylate (MMA) crosslinked with octa(propyl‐methacrylate) polyhedral oligomeric silsesquioxane (8MMAPOSS) is reported in relation to their composition and structure. The influence of the silicon content on the laser action of the dye pyrromethene 567 (PM567) is analyzed in a systematic way by increasing the weight proportion of POSS from 1 to 50%. The influence of the inorganic network structure is studied by replacing the 8MMAPOSS comonomer by both the monofunctionalized heptaisobutyl‐methacryl‐POSS (1MMAPOSS), which defines the nanostructured linear network with the POSS cages appearing as pendant groups of the polymeric chains, and also by a new 8‐hydrogenated POSS incorporated as additive to the polymeric matrices. The new materials exhibit enhanced thermal, optical, and mechanical properties with respect to the pure organic polymers. The organization of the molecular units in these nanomaterials is studied through a structural analysis by solid‐state NMR. The domain size of the dispersed phase assures a homogeneous distribution of POSS into the polymer, thus, a continuous phase corresponding to the organic matrix incorporates these nanometer‐sized POSS crosslinkers at a molecular level, in agreement with the transparency of the samples. The silicon–oxygen core framework has to be covalently bonded into the polymer backbone instead of being a simple additive and both the silica content and crosslinked degree exhibit a critical influence on the laser action.