Indoor levels of volatile organic compounds at Florentine museum environments in Italy

Indoor Air Quality monitoring in cultural institutions is of particular concern to protect these places and the cultural heritage content. An indoor monitoring campaign was performed in three museums in Florence (Italy) to determine the occurrence and levels of volatile organic compounds (VOCs). VOCs of interest included BTEX (benzene, toluene, ethylbenzene, xylenes), terpenes, aldehydes, organic acids, and cyclic volatile methyl siloxanes (cVMS). The most abundant VOCs in all samples analyzed were BTEX, which were strictly related to the traffic source, followed by siloxanes and terpenes. Among BTEX, toluene was always the most abundant followed by xylenes, ethylbenzene, and benzene. cVMS in exhibition rooms with the presence of visitors showed higher values compared to samples collected when the museums were closed. Terpenes showed not only the influence of vegetation-biogenic sources surrounding a museum but could also be related to the wood used for the construction of showcases and furniture and the use of cleaning products. Data obtained also showed the presence of organic acids and aldehydes whose source can be traced back to exhibits themselves and wood-based furniture. Assessing the levels of organic acids in museums is important because, over time, it can cause deterioration of the artifacts.     

Is open innovation always the best for SMEs? An exploratory analysis at the project level

Open innovation (OI) projects are increasingly adopted by small‐ and medium‐sized enterprises (SMEs). Yet, undertaking OI is not only a source of opportunities for SMEs as it can, at the same time, present risks. How SMEs manage the balance between the potential benefits and the emerging challenges of OI is still an overlooked topic in the literature. Using evidence gathered through multiple case studies and drawing upon the relational view of the firm, we explore how and why value creation opportunities and different managerial challenges emerge for SMEs pursuing OI projects. We analyze different stages of OI projects in several different contexts of their implementation. Our analysis sheds light on the different nature and dynamics of knowledge involved within OI projects as important boundary conditions affecting successful search paths, learning processes, and the development of appropriability mechanisms. By offering a contextualized view of OI in SMEs, this study also provides insights to business managers on the situational opportunities and constraints of OI, including managerial suggestions on actions to manage tensions within differing OI projects.     

Mechanical squeezing of an elastomeric nanochannel device: numerical simulations and ionic current characterization

Peculiar transport phenomena appear at nanoscale, since surface effects strongly affect the behaviour of fluids. Electrostatic and steric interactions, capillary forces and entropic effects play a key role in the behaviour of fluids and biomolecules. Since these effects strongly depend on the size of the nanofluidic system, a careful characterization of the fluidic environment is necessary. Moreover, the possibility to dynamically modulate the size of nanochannels is very appealing in the field of biomolecule manipulation. Recently, we have developed a lab-on-chip made of poly(dimethylsiloxane) (PDMS). This polymeric device is based on a tuneable nanochannel able to dynamically change its dimension in order to fit the application of interest. In fact, a mechanical compression applied on the top of the elastomeric device squeezes the nanochannel, reducing the channel cross section and allowing a dynamical optimization of the nanostructures. In this paper, this squeezing process is fully characterized both numerically and experimentally. This analysis provides information on the reduction of the nanochannel dimensions induced by compression as a function of the work of adhesion and of the stiffness of the materials composing the device. Moreover, calculations demonstrate the possibility to predict the change of the nanochannel size and shape induced by the compression. The possibility to dynamically tune the channel size opens up new opportunities in biomolecular sensing or sieving and in the study of new hydrodynamics effects.     

Improving the mechanical properties of clay/polymer aerogels by a simple dip‐coating procedure

Clay aerogels have many advantages as one of the lowest density family of materials current technology can provide; they possess very low thermal conductivities, high porosities, and high surface areas. Although the mechanical properties of native clay aerogels are rather low, incorporating water‐dispersible polymers into the clay gel before they are processed into aerogel forms can easily produce more robust, low‐density composites. Various processing modifications and additives can be employed to strengthen the aerogel material, but currently, the materials have some notable weaknesses in abrasion resistance, water absorption, and flexural properties. In this study, we employed a low‐cost rubber coating material to quickly and efficiently address all three of these problems. After coating, the aerogels gained significant mechanical reinforcement, a 20‐fold increase in flexural modulus and a 15‐fold increase in yield stress, while exhibiting an increase of only 8% in the thermal conductivity. Improvements such as these can improve the commercial applicability of clay/polymer aerogels as thermal insulation materials. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Absence of allergenic residues in experimental and commercial wines fined with caseinates

The possible presence of allergenic residues in wines treated with one of the potassium caseinates used as fining agents has been investigated.     

Transition Metal‐Free Direct C?H (Hetero)arylation of Heteroarenes: A Sustainable Methodology to Access (Hetero)aryl‐Substituted Heteroarenes

In recent years, environmental and economic reasons have motivated the development of transition metal‐free carbon‐carbon bond forming reactions and some excellent reviews have covered this research area of particular interest for the pharmaceutical industry. However, none of these reviews has been specifically dedicated to summarize and discuss the results achieved in the rapidly growing field of the transition metal‐free direct (hetero)arylation reactions of heteroarenes. This review, which covers the literature from 2008 to 2014, aims to provide a thorough insight into the synthetic and mechanistic aspects of these atom economic and environmentally benign reactions also highlighting their advantages and possible disadvantages compared to conventional methods for the synthesis of arylheteroarenes and biheteroaryls via transition metal‐catalyzed reactions.

     

Incorporation of postconsumer polyurethane foam into a polymer/clay aerogel matrix

The feasibility of incorporating ground recycled polyurethane (PU) foam into clay/polymer aerogels was demonstrated, and a range of compositions were prepared and characterized to determine the effect of variation in the formulations on density and mechanical properties of the resulting materials. This study followed a modified combinatorial approach. Initially, experiments were performed in water using either sodium exchanged montmorillonite or laponite clay, poly(vinyl alcohol) (PVOH) solution as the polymer binder, and the recycled PU foam. Freezing and freeze‐drying the aqueous gels produced aerogels, which were characterized through density and mechanical testing, scanning electron microscopy, and thermal gravimetric analysis. The study was expanded by exploring alternative binder chemistries, including the use of an alginate polymer in place of the PVOH or adding a polyisocyanate as a crosslinking agent for PVOH. The effect of recycled PU foam content, clay type and level, and binder type and level on the mechanical properties of the aerogels were determined and will be discussed herein. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42586.     

The morphological properties of PP coextruded tape fabrics

In the field of self‐reinforced composites many researchers have focused their attention on the coextruded tapes composed of polypropylene core and PP/PE copolymer skin. Two similar commercial fabrics (P and T) have been compared in respect of their peel resistance. For both materials, peel resistance has a periodic trend that regularly follows fabric weave style. T has demonstrated an average peel resistance and a well‐bonded area slightly greater than P. Skin/core interfacial properties have been investigated and a crosscheck between differential scanning calorimetry (DSC) and Raman spectroscopy has been adopted to understand the influence of skin structure on consolidated laminate. DSC curves exhibit three melting peaks during first heating for both fabrics, corresponding to copolymer, skin/core interface, and core melting. After consolidation at 140°C stretching‐induced superstructure and PP crystallinity degree are preserved. The presence of PP/PE copolymer + PE blend only in fabric P has been pointed out and PE content has been calculated. POLYM. ENG. SCI., 56:727–734, 2016. © 2016 Society of Plastics Engineers