Low RF noise and power loss for ion-implanted Si having an improved implantation process

Very-low-transmission line noise of <0.25 dB at 18 GHz and low power loss /spl les/0.6 dB at 110 GHz have been measured on transmission lines fabricated on proton-implanted Si. In contrast, a standard Si substrate gave much higher noise of 2.5 dB and worse power loss of 5 dB. The good RF integrity of proton-implanted Si results from the high isolation impedance to ground, as analyzed by an equivalent circuit model. The proton implantation is also done after forming the transmission lines at a reduced implantation energy of /spl sim/4 MeV. This enables easier process integration into current VLSI technology.     

Fuzzy rule interpolation for multidimensional input spaces in determining d50c of hydrocyclones

Fuzzy rule-based systems have been very popular in many engineering applications. In mineral engineering, fuzzy rules are normally constructed using some fuzzy rule extraction techniques to establish the determination model in predicting the d50c of hydrocyclones. However, when generating fuzzy rules from the available information, it may result in a sparse fuzzy rule base. The use of more than one input variable is also common in hydrocyclone data analysis. This paper examines the application of fuzzy interpolation to resolve the problems using sparse fuzzy rule bases, and to perform analysis of fuzzy interpolation in multidimensional input spaces.     

Equal Strain Consolidation by Vertical Drains

This paper shows the development of a series of closed-form solutions of equal strain consolidation in the presence of a vertical drain with smear and well resistance. Using an approach that considers the effects of both the radial and vertical drainage in a fully coupled fashion, solutions are obtained for the excess pore pressure and the degree of consolidation in the compressible soil subjected to a step- or ramp-loading situation. The closed-form solutions in the present paper may be evaluated in an electronic spreadsheet on a standard personal computer.     

A simplified method for calculating the substation grounding gridresistance

A simple and accurate formula for calculating the grounding grid resistance is proposed in this paper. This method is based on a theoretical manipulation of the numerical moment method and of the current image. The formula is dependent on the substation grounding grid design, such as grid depth, grid size, number of meshes, grid-conductor diameter, etc. A comparison study is performed to check the accuracy of the proposed formula with respect to six different formulas and methods in the literature. An excellent agreement was found between the results of this formula and the results of a sophisticated computerized method     

Effect of storage temperature on phenolics stability in hawthorn (Crataegus pinnatifida var. major) fruits and a hawthorn drink

The stability of five major phenolics, namely (−)-epicatechin (EC), procyanidin B₂ (PC-B₂), chlorogenic acid (ChA), hyperoside (HP) and isoquercitrin (IQ), in hawthorn fruits and a canned hawthorn drink were evaluated during 6 months of storage in the dark at three different temperatures (4, 23 and 40 °C). HPLC with a diode-array detector was used to determine the contents of the individual compounds. The results showed that the studied phenolics in the hawthorn fruits and the drink were both stable at 4 °C and relatively unstable at 23 and 40 °C with varied extents of degradation. At room temperature (23 °C), marked degradations of EC and PC-B₂ were observed in both the fruits and the drink with around 50% and 30% decrease after a 6-month storage, respectively. A more significant decrease of the phenolics was observed at 40 °C, especially for EC and PC-B₂, which were almost completely degraded after a 6-month storage. HP, IQ and ChA were relatively stable at 23 °C, but unstable at 40 °C. Therefore, low-temperature storage is recommended for maintaining the quality and efficacy of hawthorn fruits and its preparations.     

A comparison of lightness contrast effects in CRT and surface colours

The simultaneous contrast effect is investigated in this article. A total of 174 and 154 test/induction combinations were studied for CRT and surface colours respectively. Each combination was assessed by nine observers using a matching technique. The test and induction colours used for CRT colours were similar to surface colours using fabric samples. The results indicated a strong lightness contrast effect for both CRT and surface media; that is, the lightness of a test colour surrounded by a lighter induction colour was reduced for both CRT and surface colours. However, the effect in CRT medium was more pronounced than in the surface medium. © 2004 Wiley Periodicals, Inc. Col Res Appl, 30, 13–20, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20074     

A Customized Radiation Sensor for Ionization Collection

The measurement of absorbed doses is fundamental to radiation biology and oncology. A customized parallel plate radiation sensor was designed and fabricated as a precursor to investigating novel materials, such as carbon nanotubes, as a substitute for conventional metallic conducting plates or active volume medium. This sensor contains two thick and large-area electrodes that provide the sensor with a good signal-to-noise ratio. The 6 MV and 15 MV photon beams produced by a Varian Clinac 21 EX medical linear accelerator were used in the experiments. The linear accelerator was calibrated such that 1 monitor unit (MU) produces 1 cGy of dose in water with depth of 5 cm for a calibration geometry of source-to-axis distance equal to 100 cm and 10times10 cm² field size at the point of measurement. Ionization measurements were performed by varying the bias voltages, electrode separations, exposures, and angles of the incident beam to characterize the sensor. Signal saturation characteristics of the sensor with different electrode separations and exposures were investigated. This sensor displayed excellent linear response to exposure up to 600 MU. An analytical modeling using the pencil beam model and simulations based on device configuration were given to explain the results. In oblique incident beam experiments, the prototype sensor showed an accurate response compared to simulation results for a small field size of 1times1 cm². The sensor was tested to be suitable in the study of ionization collection efficiencies for different materials     

Effects and properties of poly(arylene ether benzonitrile)s of various molecular weights blended with sulfonated poly(ether ether ketone)

Poly(arylene ether benzonitrile) (PAEBN) was synthesized with 2,6‐dichlorobenzonitrile and biphenol. PAEBNs with various molecular weights (MWs), 1,640,000 and 185,000 g/mol, were synthesized by control of the stoichiometry of the monomers and were blended with sulfonated poly(ether ether ketone) (SPEEK). The effects of MW on the water uptake, swelling, methanol permeability, and proton conductivity of the SPEEK/PAEBN blend membranes were investigated. The molecular mobility of the SPEEK/PAEBN blends was also examined in this study. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Shapes of Submerged Funicular Arches

In this paper, the analytical forms of the shapes of submerged funicular arches are expressed in terms of elliptic integrals. The initial radius of curvature at the apex is related to the water depth at the apex and the axial compressive force. The shape of the submerged funicular arches depends on the ratio between this initial radius of curvature and the water depth at the apex. Using the analytical expressions, the maximum span and height of the submerged funicular arches can be determined explicitly. Besides, the analytical expressions are useful in determining the design parameters for the submerged funicular arches accurately.