A 90-nm logic technology featuring strained-silicon

A leading-edge 90-nm technology with 1.2-nm physical gate oxide, 45-nm gate length, strained silicon, NiSi, seven layers of Cu interconnects, and low-/spl kappa/ CDO for high-performance dense logic is presented. Strained silicon is used to increase saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10% and 25%, respectively. Using selective epitaxial Si/sub 1-x/Ge/sub x/ in the source and drain regions, longitudinal uniaxial compressive stress is introduced into the p-type MOSEFT to increase hole mobility by >50%. A tensile silicon nitride-capping layer is used to introduce tensile strain into the n-type MOSFET and enhance electron mobility by 20%. Unlike all past strained-Si work, the hole mobility enhancement in this paper is present at large vertical electric fields in nanoscale transistors making this strain technique useful for advanced logic technologies. Furthermore, using piezoresistance coefficients it is shown that significantly less strain (/spl sim/5 /spl times/) is needed for a given PMOS mobility enhancement when applied via longitudinal uniaxial compression versus in-plane biaxial tension using the conventional Si/sub 1-x/Ge/sub x/ substrate approach.     

Novel Pt-Ru nanoparticles formed by vapour deposition as efficient electrocatalyst for methanol oxidation: Part II. Electrocatalytic activity

The methods developed and described in paper—part I are employed to prepare nanometer size Pt-Ru particles on a Vulcan^® XC72R substrate with controlled metal loading. Transmission Electron Microscopy (TEM) confirmed uniform particles size (average diameter 2 nm) and homogeneous dispersion of the particles over the substrate. Energy Dispersive X-ray absorption (EDX) analysis confirmed the compositional homogeneity. The catalytic activity of these supported nanoparticles with regard to methanol electrooxidation is investigated using cyclic voltammetry (CV), chronoamperometry (CA) and CO-stripping voltammetry techniques at temperatures between 25 and 60 °C. Such investigation concerns supported catalysts prepared with ca. 10 and 18 wt.% overall metal loading (Pt + Ru) onto the Vulcan^® XC72R substrate. Comparative testing of our catalysts and a commercial Pt-Ru/Vulcan reveals markedly superior activity for our catalysts. In fact, we observe for the latter a five-fold increase of the oxidation current as compared to a commercial Pt-Ru/Vulcan with equal metal loading. One of the reasons for the greater activity is found to be the very high dispersion of the metals over the substrate, i.e. the large surface area of the active phase. Other reasons are plausibly ascribable to the varied Pt/Ru composition and/or reduced presence of contaminants at the catalyst surface.     

A benefit-risk analysis of once-daily venlafaxine extended release (XR) and venlafaxine immediate release (IR) in outpatients with major depression

The traditional analysis of clinical trial data for antidepressants separately evaluates the results of efficacy and tolerability. The present analysis simultaneously evaluated these outcome criteria in a double-blind, placebo-controlled study of outpatients with major depression. Patients received either once-daily extended release (XR) venlafaxine or immediate release (IR) venlafaxine. Individual patient data on efficacy and treatment-emergent study events (TESE) for venlafaxine XR and venlafaxine IR were grouped into five categories. Efficacy was defined as a final on-therapy Clinical Global Impressions improvement score of 1 (very much improved) or 2 (much improved). A TESE was defined as any new adverse event or any adverse event that existed at baseline and increased in severity during treatment. Benefit/risk was evaluated using a linear measure and a ratio measure for dizziness, Insomnia, nausea, nervousness, somnolence, and a composite of anticholinergic events. This analysis demonstrated a superior benefit/risk ratio for the once-daily venlafaxine XR compared with venlafaxine IR, and a statistically significant benefit-to-risk ratio of at least 2:1 for venlafaxine XR over venlafaxine IR was demonstrated for nausea and dizziness. This approach to the statistical analysis of clinical trial data represents an advancement in addressing treatment outcome by incorporating clinically relevant measures of both efficacy and safety.     

Traditional and novel fermented foods and beverages from tropical root and tuber crops: review

Tropical root and tuber crops [cassava, sweet potato, yams, colocasia (taro), etc] are important staples for food security for about a fifth of the world population. Bulk of cassava in Africa and Latin America are processed into fermented foods and food additives such as organic (acetic, citric and lactic) acids, mono-sodium glutamate, etc. The fermented foods from cassava are gari , fufu , lafun , chickwanghe , agbelima , attieke and kivunde in Africa, tape in Asia and ' cheese ' bread , and ' coated peanut ' in Latin America. Lactic acid bacteria and yeasts are the major group of micro-organisms associated with cassava fermentation. Similarly, sweet potatoes can be fermented into soy sauce, vinegar, lacto-juices, lacto-pickles and sochu (an alcoholic drink produced in Japan), and yams into fermented flour. Most of these fermented food products are functional foods rich in phytochemicals, dietary fibres, anti-oxidant compounds (β-carotene, anthocyanin, etc) and probiotic components (lactic acid bacteria and yeasts).     

Wuchereria bancrofti microfilariae in the dentigerous cystic fluid: an unusual presentation

The Glidewire (Microvasive, Natick, MA) or Terumo wire (Terumo, Japan) is constructed with a hydrophilic polymer surface that enables easier passage through narrowed lumens in the urinary tract. This study examined the effects of gas sterilization on Glidewire surface structure, slipperiness, and ability to support bacterial growth. Light microscopy at 100x and 400x and scanning electron microscopy at 100 to 1300x were used to compare the surface tips of five new 0.038-inch Glidewires with those resterilized one or three times. The tips were immersed in water prior to standard gas sterilization for operating room equipment. Subjective evaluation of slipperiness involved asking 10 blinded urologists to assess the nature of new and resterilized wires by feel. Support of bacterial growth was assessed by comparing cultures performed on new wires (control) with those of wires incubated with Bacillus stearothermophilus. Microscopy, reviewed by a pathologist, revealed no perceivable surface differences after one and three gas sterilizations. Eight of the urologists noted similar or improved slipperiness of resterilized wires compared with new wires. Bacterial cultures of intentionally infected wire segments showed no growth after standard gas sterilization in all cases. In this study, gas sterilization did not adversely affect the lubricious nature or the surface coating of the hydrophilic coating of Glidewires. Also, gas resterilization was bactericidal to new and used wires that had been infected with a heat-tolerant organism.     

An empirical model for defluoridation by batch monopolar electrocoagulation/flotation (ECF) process

Excessive presence of fluoride concentration in community water supplies can cause fluorosis that affects the teeth and bones. Batch experiments with monopolar aluminium electrodes for fluoride removal were conducted and an empirical model is developed using critical parameters such as current concentration, electrode distance, and initial fluoride concentration. Fluoride ions were removed electrochemically from solution by electrocoagulation/flotation (ECF) process. The electrolytic dissolution of aluminium anodes in water produced aqueous Al3+ species and hydrogen bubbles at the aluminium cathodes. The fluoride removal efficiency increases steadily with increasing current values from 1 to 2.5 A. In the batch monopolar ECF process, the optimal detention time (dto) was found to be 55 min when the operational parameters including initial F- concentration, current value, and inter electrode distance were respectively kept at 10 mg/l, 1.5 A, and 5 mm. The experimental results showed that the rate constant (K) for defluoridation by monopolar ECF process depends on the current concentration (I/V), electrode distance (d) and initial fluoride concentration (C0). The Al3+/F- mass ratio is found to be not significantly different between monopolar and bipolar ECF systems. Overall, the results showed that the electrocoagulation technology is an effective process for defluoridation of water.     

Color stability of frozen whole tilapia exposed to pre‐mortem treatment with carbon monoxide

BACKGROUND: Color of muscle foods plays a major role in consumer perception of meat quality. Carbon monoxide (CO) has been successfully used for improving color of packaged meat and fish products. In this study, we wanted to investigate pre‐mortem treatment of live tilapia using 100% CO for its ability to improve the color of frozen whole tilapia. We compared untreated and CO‐treated whole, gutted tilapia, frozen for 2 and 4 months at ? 20 °C. Frozen tilapia samples were thawed overnight at 4 °C, filleted and analyzed for their color, heme peak wavelength and CO concentration. RESULTS: Euthanasia using CO significantly increased redness (a* value) and lightness (L* value) of tilapia white and red muscle. Frozen storage significantly (P < 0.05) decreased redness of both CO‐treated and untreated tilapia. However, even after 4 months of frozen storage, a*‐value of CO‐treated tilapia was similar to fresh untreated tilapia fillets. Heme peak wavelengths of CO‐euthanized tilapia were higher than in untreated tilapia and there was no significant (P > 0.05) decrease in heme peak wavelengths of CO‐treated tilapia white and red muscle during frozen storage. The CO content of frozen euthanized tilapia fillets was significantly (P > 0.05) higher than in untreated fillets. In general, red muscle tissue of euthanized tilapia had a higher concentration of CO than white muscle. CONCLUSION: Color stability of tilapia fillets was significantly improved by pre‐mortem CO treatment. The color of CO‐treated fillets was retained during frozen storage compared to untreated fillets. Hence, pre‐mortem CO treatment could be used as a new method for improving color of tilapia. Copyright © 2008 Society of Chemical Industry     

Enhanced gravity particle classifier: Experiments with 3D printed device and computational fluid dynamics simulations

Centrifugal force developed in a fluid flow through closed spiral channel produces enhanced gravity environment to facilitate particle classification. The novel design is inspired by open channel spiral concentrators that are used in mineral processing industries. The concept is initially validated through computational fluid dynamics (CFD) simulations. Preferential movement of coarser particles, which experience greater centrifugal force, to the outer periphery was observed. These predictions are validated by conducting experiments on a 3D printed spiral classifier. The CFD simulations compared well with observed experimental separation function. The model was further used to conduct parametric study of various design and operational parameters. Simulations reveal that the cut-size could change from 8 μm to 260 μm depending on the splitter position. The novel device will allow a direct and online control of cut size/density when suitably enhanced with required mechanisms.     

Oxidative stability of mahi mahi red muscle dipped in tilapia protein hydrolysates

The oxidative stability of mahi mahi red muscle dipped in tilapia protein hydrolysates was evaluated. Alkali solubilised tilapia protein isolate was hydrolysed using Flavourzyme to 13% degree of hydrolysis. Whole tilapia protein hydrolysate and ultrafiltered fraction <10 kDa were used as dip solutions. Mahi mahi red muscle was dip treated either for 2 or 4 min and stored at 4 °C. Lipid hydroperoxides (PV), thiobarbituric acid reactive substances (TBARS) and a∗ value were measured at regular intervals. Results showed that dip treatments significantly decreased (p < 0.05) the formation of PV and TBARS over 90 h storage time. There was no significant (p > 0.05) difference between WH and <10 kDa fractions, and between 2 and 4 min treatments. Red colour of treated samples measured as a∗ value decreased with storage time, but was not significantly different from the control. It could be concluded that dip treatment for 2 min in whole tilapia protein hydrolysate may be used as a potential antioxidant treatment for improving oxidative stability of fish fillets.