Mechanical and tribological properties of silicon carbide coating on Inconel alloy from liquid pre-ceramic precursor

Liquid polycarbosilane (LPCS) derived hard coatings of silicon carbide (SiC) were deposited on Inconel alloy at three different moderately high temperatures by chemical vapour deposition. The deposited films were characterized by X-ray diffractometry and Field emission scanning electron microscopy. Liquid PCS yielded a mixture of α-SiC and β-SiC during decomposition having uniform round-shaped particles of dimension around 200–300 nm without extensive cracking and few discrete shaped particles were also found to form at higher temperature (i.e. 1100 °C and 1200 °C) deposited films. The coated samples showed substantial increment in hardness and fracture toughness as compared to the uncoated sample. The fracture toughness (K_IC) values of the deposited films were in the range of 6.7–10.7 MPa(m)^1/2. The tribological properties and hardness of the films were also found to vary with deposition temperature. The scratch tracks of the films revealed that brittle failures occurred in all SiC coated substrates.     

Exploring the Bioactive Potentials of C60-AgNPs Nano-Composites against Malignancies and Microbial Infections

At present, the potential role of the AgNPs/endo-fullerene molecule metal nano-composite has been evaluated over the biosystems in-vitro. The intra-atomic configuration of the fullerene molecule (C₆₀) has been studied in-vitro for the anti-proliferative activity of human breast adenocarcinoma (MDA-MB-231) cell lines and antimicrobial activity against a few human pathogens that have been augmented with the pristine surface plasmonic electrons and antibiotic activity of AgNPs. Furthermore, FTIR revealed the basic vibrational signatures at ~3300 cm⁻¹, 1023 cm⁻¹, 1400 cm⁻¹ for O-H, C-O, and C-H groups, respectively, for the carbon and oxygen atoms of the C₆₀ molecule. NMR studies exhibited the different footprints and magnetic moments at ~7.285 ppm, explaining the unique underlying electrochemical attributes of the fullerene molecule. Such unique electronic and physico-chemical properties of the caged carbon structure raise hope for applications into the drug delivery domain. The in-vitro dose-dependent application of C₆₀ elicits a toxic response against both the breast adenocarcinoma cell lines and pathogenic microbes. That enables the use of AgNPs decorated C₆₀ endo fullerene molecules to design an effective anti-cancerous drug delivery and antimicrobial agent in the future, bringing a revolutionary change in the perspective of a treatment regime.     

Identification of Species Origin of Meat and Meat Products on the DNA Basis: A Review

The adulteration/substitution of meat has always been a concern for various reasons such as public health, religious factors, wholesomeness, and unhealthy competition in meat market. Consumer should be protected from these malicious practices of meat adulterations by quick, precise, and specific identification of meat animal species. Several analytical methodologies have been employed for meat speciation based on anatomical, histological, microscopic, organoleptic, chemical, electrophoretic, chromatographic, or immunological principles. However, by virtue of their inherent limitations, most of these techniques have been replaced by the recent DNA-based molecular techniques. In the last decades, several methods based on polymerase chain reaction have been proposed as useful means for identifying the species origin in meat and meat products, due to their high specificity and sensitivity, as well as rapid processing time and low cost. This review intends to provide an updated and extensive overview on the DNA-based methods for species identification in meat and meat products.     

Fabrication of Food Grade Vitamin E Nanoemulsion by Low Energy Approach,Characterization and Its Application

The present study was carried out to fabricate the food grade vitamin E acetate nanoemulsion using edible mustard oil and to evaluate its improved bioactivities. A food-grade vitamin E acetate nanoemulsion was fabricated using the edible mustard oil and surfactant Tween-80. Flocculation was not observed for 15 days. The nanoemulsion was characterized for droplet morphology and size distribution using atomic force microscope and zetasizer, respectively. We observe a stable nanoemulsion of spherical morphology and a size distribution of 86.45 ± 3.61 nm. Further, the high-performance liquid chromatography method was used to determine the vitamin E acetate concentration and encapsulation efficiency for the stable nanoemulsion. These nanoemulsions showed improved bioactivity, antioxidant, and antimicrobial activity and could be potentially used to increase the shelf life of fruit juice.     

Effects of feeding an aquatic weed Lemna trisulaca as partial replacement of fish meal on the performance of growing ducklings

Growing ducklings were fed diets containing an aquatic weed Lemna trisulaca meal (LTM) replacing, on a protein basis, either 40, 60 or 80 g kg^?1 of the fish meal (FM) from a control diet which contained 120 g FM kg^?1. Partial replacement of FM (40 and 60 g kg^?1 of the FM) by LTM on a protein basis showed good growth and low food consumption but food conversion efficiency was found to be comparable. It was concluded that LTM could be considered as a protein feed supplement for growing ducklings and also as a part replacement of animal protein (FM) in the nutrition of growing ducklings without deleterious effect on performance.     

Direct simulation of turbulent heat transfer in swept flow over a wire in a channel

We investigate heat transfer characteristics of a turbulent swept flow in a channel with a wire placed over one of its walls using direct numerical simulation. This geometry is a model of the flow through the wire-wrapped fuel pins, the heat exchanger, typical of many civil nuclear reactor designs. The swept flow configuration generates a recirculation bubble with net mean axial flow. A constant inward heat flux from the walls of the channel is applied. A key aspect of this flow is the presence of a high temperature region at the contact line between the wire and the channel wall, due to thermal confinement (stagnation). We analyze the variation of the temperature in the recirculation bubble at Reynolds number based on the bulk velocity along the wire-axis direction and the channel half height of 5400. Four cases are simulated with different flowrates transverse to the wire-axis direction. This configuration is topologically similar to backward-facing steps or slots with swept flow, except that the dominant flow is along the obstacle axis in the present study and the crossflow is smaller than the axial flow, i.e., the sweep angle is large. The temperature field is simulated at three different Prandtl numbers: 10^?2, 10^?1 and 1. The lower value of Prandtl number is characteristic of experimental high-temperature reactors that use a molten salt as coolant while the high value is typical of gas (or water vapor) heat exchangers. In addition, mean temperature, turbulence statistics, instantaneous wall temperature distribution and Nusselt number variation are investigated. The peak Nusselt number occurs close to the reattachment location, on the lee side of the wire, and is about 50–60% higher compared to the case without crossflow. The high temperature region follows the growth of the recirculation bubble which increases by about 65% from the lowest to highest amount of crossflow. Particular attention is devoted to the temperature distribution on the walls of the channel and the surface of the wire. The behavior of the heat-flux across the mean dividing streamline of the recirculation bubble is investigated to quantify the local heat transfer rates occurring in this region.     

Impacts of conservation agriculture on soil aggregation and aggregate-associated N under an irrigated agroecosystem of the Indo-Gangetic Plains

We evaluated impacts of conservation agriculture (zero tillage, bed planting and residue retention) on changes in total soil N (TSN) and aggregate-associated N storage in a sandy loam soil of the Indo-Gangetic Plains. Cotton (Gossypium hirsutum) and wheat (Triticum aestivum) crops were grown during the first 3 years (2008–2011) and in the last year, maize (Zea mays) and wheat were cultivated. Results indicate that after 4 years the plots under zero tillage with bed planting (ZT-B) and zero tillage with flat planting (ZT-F) had 15 % higher TSN concentrations than conventional tillage and bed planting plots (CT-B) (0.63 g kg^?1 soil) in the 0–5 cm soil layer. CT-B plots had lower soil bulk density that ZT plots in that layer. Plots under ZT-B (0.57 Mg ha^?1) contained 20 % higher TSN stock in the 0–5 cm soil layer than CT-B plots (0.48 Mg ha^?1). However, tillage had no impact on TSN concentration or stock in the sub-surface (5–15 and 15–30 cm) soil layers. Thus, in the 0–30 cm soil layer, ZT-B plots contained 6 and 5 % higher (P > 0.05) TSN stock compared with CT-B (2.15 Mg N ha^?1) and CT-F (2.19 Mg N ha^?1) plots respectively after 4 years. Plots that received cotton/maize + wheat residue (C/M + W RES) contained 16 % higher TSN concentration than plots with residues removed (N RES; 0.62 g kg^?1 soil) in the surface (0–5 cm) layer. Plots with only cotton/maize residue (C/M RES) or only wheat residue (W RES) retention/incorporation had similar TSN concentrations and stocks in the subsurface layer. Plots under ZT-B also had more macroaggregates (0.25–8 mm) and greater mean weight diameter with lower silt + clay sized particles than CT-B plots in that layer. A greater proportion of large macroaggregates (2–8 mm) in the plots under C/M + W RES compared with N RES were observed. In the 5–15 cm soil layer ZT-B and C/M + W RES treated plots had more macroaggregates and greater mean weight diameter than CT-B and N RES treated plots, respectively. Because of the greater amount of large aggregates, plots under ZT-B and C/M + W RES had 49 and 35 % higher large macroaggregate-associated N stocks than CT-B (38 kg TSN ha^?1) and N RES (40 kg TSN ha^?1) plots, respectively, in the 0–5 cm soil layer, although aggregates had similar TSN concentrations in all plots. Both tillage and residue retention had greater effects on aggregate-associated N stocks in the 5–15 cm layers. In addition to N content within large macroaggregates, small macroaggregate-associated N contents were also positively affected by ZT-B and C/M + W RES. Tillage and residue retention interaction effects were not significant for all parameters. Thus, the adoption of ZT in permanent beds with crop residue addition is a better management option for improvement of soil N (and thus possibly a reduced dose of fertilizer N can be adopted in the long run), as the management practice has the potential to improve soil aggregation with greater accumulation of TSN within macroaggregates, and this trend would likely have additive effects with advancing years of the same management practices in this region.     

Mobility activation in thermally deposited CdSe thin films

Effect of illumination on mobility has been studied from the photocurrent decay characteristics of thermally evaporated CdSe thin films deposited on suitably cleaned glass substrate held at elevated substrate temperatures. The study indicates that the mobilities of the carriers of different trap levels are activated due to the energy of incident illumination, which results in the existence of two distinct trap levels. In each trap depth the energy of the trap increases linearly. It infers that there is a linear distribution of traps of different energies below the conduction band.     

Dielectric and Thermal Investigations on PbNb2O6 in Pure Piezoelectric Phase and Pure Non-Piezoelectric Phase

A high piezoelectric transition temperature is indicated for present orthorhombic samples of lead meta-niobate (PbNb₂O₆) by the high value of the temperature (T_m) at which the real part (?′) of electrical permittivity peaks. It is 573 to 580°C. The imaginary component (?″) increases sharply at these temperatures. Cooling run after heating to 700°C gives changed values of ?′ and ?″ and T_m. Present work reports impedance spectroscopy (up to 700°C over 20 Hz to 5.5 MHz) and Differential Scanning Calorimetry or DSC on the pure orthorhombic phase, and, for the first time, on the pure rhombohedral phase. DSC shows an endothermic dip across T_m during heating and an exothermic peak during cooling for the orthorhombic sample only.     

Solving conflicting bi-objective facility location problem by NSGA II evolutionary algorithm

This paper focuses on the facility location problem with two conflicting objectives. We observe that minimization of the total cost of a particular echelon may lead to the increase in the total cost of a supply chain as a whole. Thus, these conflicting objectives are required to be met together from a supply chain perspective. We have solved the problem formulated in mixed nonlinear programming by a multi-objective evolutionary algorithm (MOEA) known as non-dominated sorting algorithm, or NSGA II in short. Numerical example is provided to show the effect of the algorithm on the solution.