Automatic dimensional reduction and meshing of stiffened thin-wall structures

The creation of idealised, dimensionally reduced meshes for preliminary design and optimisation remains a time-consuming, manual task. A dimensionally reduced model is ideal for assessing design changes through modification of element properties without the need to create a new geometry or mesh. In this paper, a novel approach for automating the creation of mixed dimensional meshes is presented. The input to the process is a solid model which has been decomposed into a non-manifold assembly of smaller volumes with different meshing significance. Associativity between the original solid model and the dimensionally reduced equivalent is maintained. The approach is validated by means of a free-free modal analysis on an output mesh of a gas turbine engine component of industrial complexity. Extensions and enhancements to this work are also discussed.     

INTEGRATING ALBEMARLE RESOLVE DESULFURIZATION TECHNOLOGY WITH NOVEL PETRO-CANADA PROCESS CONCEPTS IN COMMERCIAL FCCU OPERATIONS

The gasoline and distillate sulfur regulations promulgated throughout the world to reduce tail-pipe emissions are now strongly impacting refinery operations and investments. FCC gasoline is recognized as the principal contributor of sulfur to the gasoline pool and has become the focus for meeting the new specifications. The difficulty in removing sterically hindered sulfur species in the fluid catalytic cracking unit (FCCU) cycle oil drives up the hydrogen and investment costs for treating the distillates. Although installation of pre- and post-treatment facilities is planned by many refiners, other non-capital approaches such as undercutting are being evaluated to meet interim and future sulfur levels. Even when expensive treatment facilities are installed, operating costs can be lowered and the flexibility of the facility increased with improvements in the ability to remove sulfur in the FCCU. In this article, we detail Petro-Canada's experience in integrating Albemarle's RESOLVE sulfur reduction technology with a combination of innovative process ideas. These concepts include heavy naphtha recycle, coprocessing of hydrogen donor feeds, and recycle of light cycle oil (LCO) to a specially designed stripper reactor. Special attention is paid to the interaction of deep FCC feed hydrodesulfurization with the FCC performance. The results demonstrate that very low FCC gasoline sulfur levels can be achieved without significant capital investment through novel approaches to recycle, creative integration of cat feed hydrotreating unit (CFHTU)-FCCU designs and operations, and application of state-of-the-art sulfur reduction additive technology. An added benefit of the RESOLVE 950 sulfur reduction technology is the substantial elimination of sulfur oxides in the FCC flue gas. This has been observed in Petro-Canada operations and numerous other RESOLVE 950 applications around the world.     

Combinatorial chemistry methods for coating development: VI. Correlation of high throughput screening methods with conventional measurement techniques

Combinatorial chemistry has proven to be a valuable tool for the development of new compounds. In the pharmaceutical industry, where combinatorial chemistry began, the approach has been instrumental in the high-speed development of new drugs. Due to the overwhelming success of the combinatorial methodology in the pharmaceutical industry, it has been recently applied to materials development. We have recently developed a combinatorial factory capable of preparing and evaluating on the order of 100 organic clear coatings in a day.

One of the most challenging aspects of the creation of the combinatorial factory was the development of the high throughput screening (HTS) methods for the primary coating properties of interest such as optical clarity, abrasion resistance, adhesion, and weatherability. For each property, an entirely new method was developed that allowed for rapid measurement of these properties on very small samples. This paper describes various aspects of the development of these novel measurement systems including the correlation of the HTS methods with conventional, industry standard measurement methods.     

Platinum-group metal cyclodextrin complexes and their use as command-cure catalysts in silicones

The Command-Cure concept is defined for a curable formulation as one with long work-like at ambient temperature and rapid cure time at elevated temperature. This concept is explored for a curable silicone system, cured via hydrosilylation. CODMCl₂ complexes (COD=1.5-cyclo-octadiene:M=Pt. Pd) are reacted with beta-cyclodextrin (-CD) to make 11 inclusion compounds,M=Pd.2;M=Pt.4. Compounds2 and4 were analyzed by¹H NMR and X-ray powder diffraction. Their catalytic ability was evaluated in a model system as well as a polymeric system that gels upon cure. Surprisingly, the Pd analog2 was a good command-cure catalyst whereas the guest compound CODPdCl₂,1, was not active in the hydrosilylation reaction. The Pt analog,4, was an effective command-cure catalyst while the corresponding guest. CODPtCl₂,3, was too active at low temperature in the hydrosilylation reaction. Additional Pt compounds and one Rh inclusion compound were evaluated as command cure catalysts. These inclusion compounds were: 11 -CD:[CODRhCl]₂,5: 11 -CD:CpPtMe₃,6 (Cp=cyclopentadienyl): 12 -CD:MeCpPtMe₃,7; 12 -CO:CODPtMe₂,8. The effectiveness of4 8 was evaluated in a number of silicone systems.     

Flow distribution in spiral mandrel dies

An analysis of flow of a power law fluid in a spiral mandrel die is presented. The analysis is applied to study the effect of various die design parameters on the flow distribution at the end of the spiral mandrel section. Three variables that have a very strong effect on the flow distribution are the number of grooves, the initial clearance, and the groove helix angle. The distribution is improved by increasing the number of grooves, by using a non-zero initial clearance, and a relatively small helix angle. Two more variables that have a significant effect on the flow distribution are the taper angle and the initial groove depth. The optimum taper angle was found to be between 1 and 3 degrees. The distribution uniformity improves with the initial groove depth, while the pressure drop reduces at the same time.     

Comparison Between a Pt–Rh/Ba/Al2O3 and a Newly Formulated NOX-Trap Catalysts Under Alternate Lean–Rich Flows

In situ FT-IR spectroscopy coupled with mass spectrometry have been used to study the mechanism of nitrates formation and reduction over a common Pt–Rh/Ba/Al₂O₃ NO _x storage catalyst, compared with a different alumina-based compound.The experimental device used consists of a transmission reactor cell (having a very small dead volume) dedicated to the evolution of surface species, and of a mass spectrometer combined with a FT-IR micro-cell for gas analysis, allowing time resolved analysis in stationary and transient conditions.At the first time the nitration properties of the catalysts under a lean flow have been studied in the appropriate temperature window (473–673 K). The dynamics of nitrates formation has been pointed out, as well as the different coordination sites on the compounds surface. Then the catalysts have been alternatively exposed to rich and lean flows very close to the real exhaust composition. This has allowed the identification of reduction pathway, active sites, intermediate species and by-products for NO _X -trap reaction. In particular, we have differentiated the role of the support and of the noble metal in the mechanism, as well as of isocyanate adspecies and ammonia among the detected species. The very high NO _X storage properties and the selectivity (near 100%) in nitrogen of the newly designed catalyst have been pointed out.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

DYNAMIC TENSIONS IN FINITE OIL DROPLETS

In reacting systems, dynamic interfacial tension (IFT) values above 10-20 mN/m are often encountered. For such high tension values, infinitely long oil droplets will not be realised in spinning drop tensiometry. Hence, Vonnegut's solution will not be strictly valid. The experimentalist is then compelled to use one of the several alternative solution schemes proposed in the literature. We have obtained dynamic IFT data for 0.3125 mM oleic acid in hexadecane contacted with various NaOH solutions by the use of a novel experimental scheme called photo-micropendography. These tension values were then compared with spinning drop tensiometer data calculated by using three alternative solution schemes, namely, Vonnegut's method, the formula of Slattery and Chen and the analysis of Princen el al. The comparison showed that when the droplet's length/width ratio was below 2.5, Vonnegut's formula was severely in error. The solution scheme proposed by Slattery and Chen gave tension values close to those found by photo-micropendography over the entire range of IFT values exhibited by the oleic acid/caustic systems. However, the most consistent and reasonably accurate tension values resulted from the use of Table I in the paper by Princen, Zia and Mason. A simplified computer algorithm has been proposed for calculating dynamic interfacial tensions using the formulas and tables proposed by the latter authors. However, at length/width ratios above 2.5, the agreement between interfacial tensions determined by micropendography and spinning drop data calculated by the use of Vonnegut's solution was quite good.     

Subsoil <Superscript>15</Superscript>N-N<Subscript>2</Subscript>O Concentrations in a Sandy Soil Profile After Application of <Superscript>15</Superscript>N-fertilizer

Studies on emissions of nitrous oxide (N₂O) from agricultural soils mostly focus on fluxes between the soil and the atmosphere or are limited to the atmosphere in the topsoil. However, in soils with shallow water tables, significant N₂O formation may occur closer to the groundwater. The aims of this study were (i) to determine the importance of subsoil N₂O formation in a sandy soil; and (ii) to obtain a quantitative insight in the contribution of subsoil N₂O to the overall losses of N₂O to the environment. We applied ¹⁵N labeled fertilizer at a rate of 5.22 kg ¹⁵N ha⁻¹; 50% as Ca(NO₃)₂ and 50% as NH₄Cl, on a mesic typic Haplaquod seeded with potatoes (Solanum tuberosum L.), and traced soil N₂O concentrations and fluxes over a one-year period. Throughout the year, total N₂O and the amount of ¹⁵N recovered in soil N₂O were highest in the subsoil, with a maximum concentration at 48 cm depth in mid-February of 19900 μl m⁻³ and 24 μg ¹⁵N m⁻³, respectively. The maximum concentration coincided with the highest water-filled pore space of 71%. The cumulative flux of N₂O was 446 g N₂O-N ha⁻¹, the recovery of ¹⁵N in this flux was 0.06%. During the summer, maximum fluxes followed high soil N₂O concentrations. During winter, no such relation was found. We concluded that the formation of N₂O was the highest in the subsoil, largely controlled by water-filled pore space rather than NO₃⁻ concentration or temperature. Although high subsoil N₂O concentrations did not lead to high surface fluxes of N₂O in the winter, artificial draining may lead to high indirect N₂O emissions through supersaturated drainage water.