Synthesis of Long-Chain β-Lactones and Their Antibacterial Activities against Pathogenic Mycobacteria

In the quest for new antibacterial agents, a series of novel long- and medium-chain mono- and disubstituted β-lactones was developed. Their activity against three pathogenic mycobacteria—M. abscessus, M. marinum, and M. tuberculosis—was assessed by the resazurin microtiter assay (REMA). Among the 16 β-lactones synthesized, only 3-hexadecyloxetan-2-one (VM005) exhibited promising activity against M. abscessus, whereas most of the β-lactones showed interesting activities against M. marinum, similar to that of the classical antibiotic, isoniazid. Regarding M. tuberculosis, six compounds were found to be active against this mycobacterium, with β-lactone VM008 [trans-(Z)-3-(hexadec-7-en-1-yl)-4-propyloxetan-2-one] being the best growth inhibitor. The promising antibacterial activities of the best compounds in this series suggest that these molecules may serve as leads for the development of much more efficient antimycobacterial agents.     

POLYELECTROLYTE MULTILAYER STAMPING IN AQUEOUS PHASE AND NON-CONTACT MODE

Polyelectrolyte multilayer (PEM) transfer printing has been previously achieved by stamping under dry conditions. Here, we show for the first time, that PEM can be transferred from a stamp to the base substrate under aqueous conditions whereby the two surfaces are in a non-contact mode. Degradable multilayers of (PAA/PEG)(10.5) followed by non-degradable multilayers of (PDAC/SPS)(80.5) were fabricated under acidic pH conditions on either PDMS or glass (stamp), and subsequently transferred over top of another multilayer prepared on a different substrate (base substrate), with a spacing of ~ 200 μm between the stamping surface and the base substrate. This multilayer transfer was performed under physiological pH conditions. This process is referred to herein as non-contact, aqueous-phase multilayer (NAM) transfer. NAM transfer can be useful for applications such as fabricating three-dimensional (3-D) cellular scaffolds. We attempted to create a 3-D cellular scaffold using NAM transfer, and characterized the scaffolds with conventional and fluorescence microscopy.     

BDD anodic oxidation as tertiary wastewater treatment for the removal of emerging micro‐pollutants,pathogens and organic matter

This work reports for the first time the removal of 17α‐ethynylestradiol (EE2), a synthetic estrogen hormone, from secondary treated effluents by electrochemical oxidation. Experiments were conducted in a single compartment reactor comprising a boron‐doped diamond (BDD) anode and a zirconium cathode. EE2, in the range 100–800 µg L^?1, was spiked in the post‐chlorination effluent of a municipal treatment plant and oxidized at 0.9–2.6 mA cm^?2 current density. Complete degradation of 100 µg L^?1 EE2 was achieved in 7 min at 2.1 mA cm^?2 and inherent conditions, while the addition of 0.1 mol L^?1 NaCl achieved removal in just a few seconds. The process was then tested in the pre‐chlorination effluent at 2.1 mA cm^?2 and inherent conditions; complete E. coli killing and EE2 removal occurred in just 1.5 and 3.5 min, respectively, while overall estrogenicity (assessed by the YES assay) and residual organic matter (in terms of chemical oxygen demand (COD)) decreased by 50% and 85% after 30 min, respectively. These results clearly show the potential of BBD electrochemical oxidation to serve as an efficient tertiary wastewater treatment. Copyright © 2011 Society of Chemical Industry     

Linear and networked polymers formed by the near simultaneous occurrence of etherification and esterification under mild reaction conditions

Despite the large difference in their nucleophilicity, phenoxide and carboxylate anions take part nearly simultaneously in the aliphatic nucleophilic substitution reaction with 1,4‐dibromo‐2‐butene. This leads to the formation of ether (? O? ) and ester (? COO? ) linkages simultaneously under mild reaction conditions when hydroxyl benzoic acids are employed as nucleophiles. The process yields a new class of polymer broadly classified as unsaturated poly(ether ester) which are potentially functionalizable. This methodology has also been extended for preparing networked polymers by making use of 3,5‐dihydroxybenzoic acid as A₃ type monomer. Copyright © 2011 Society of Chemical Industry     

Trans-Splicing Improvement by the Combined Application of Antisense Strategies

Spliceosome-mediated RNA trans-splicing has become an emergent tool for the repair of mutated pre-mRNAs in the treatment of genetic diseases. RNA trans-splicing molecules (RTMs) are designed to induce a specific trans-splicing reaction via a binding domain for a respective target pre-mRNA region. A previously established reporter-based screening system allows us to analyze the impact of various factors on the RTM trans-splicing efficiency in vitro. Using this system, we are further able to investigate the potential of antisense RNAs (AS RNAs), presuming to improve the trans-splicing efficiency of a selected RTM, specific for intron 102 of COL7A1. Mutations in the COL7A1 gene underlie the dystrophic subtype of the skin blistering disease epidermolysis bullosa (DEB). We have shown that co-transfections of the RTM and a selected AS RNA, interfering with competitive splicing elements on a COL7A1-minigene (COL7A1-MG), lead to a significant increase of the RNA trans-splicing efficiency. Thereby, accurate trans-splicing between the RTM and the COL7A1-MG is represented by the restoration of full-length green fluorescent protein GFP on mRNA and protein level. This mechanism can be crucial for the improvement of an RTM-mediated correction, especially in cases where a high trans-splicing efficiency is required.     

Analysis of seed oil from ricinus communis and dimorphoteca pluvialis by gas and supercritical fluid chromatography

The seed oils from Dimorphoteca pluvialis and Ricinus communis contain hydroxy fatty acids. Dimorphoteca pluvialis contains Δ-9-hydroxy-10t, 12t-octadecadienoic acid (dimorphecolic acid) and R. communis contains Δ-12-hydroxy-9c-octadecenoic acid (ricinoleic acid). The oils were derivatized and analyzed to determine the content of hydroxy fatty acids. The trimethylsilyl fatty acid methyl ester (TMS-FAME) derivatives were analyzed by capillary gas chromatography (GC), and the free fatty acid (FFA) derivatives and the oils were analyzed by capillary supercritical fluid chromatography (SFC). Further, mass spectroscopy of the TMS-FAME derivatives was performed to check the purity of the derivatives. The results from the GC analyses of TMS-FAME corresponded to the results found by SFC analysis of the FFA. The content of ricinoleic acid in the glycerolipids of R. communis was 87.7 wt%, and the content of dimorphecolic acid in D. pluvialis was 54.0 wt%. The methods were evaluated with respect to the cost, ease, and time needed for sample preparation and analysis.     

Host Suitability Affects Odor Association in <Emphasis Type="Italic">Cotesia marginiventris</Emphasis>: Implications in Generalist Parasitoid Host-Finding

Insect herbivores often induce plant volatile compounds that can attract natural enemies. Cotesia marginiventris (Hymenoptera: Braconidae) is a generalist parasitoid wasp of noctuid caterpillars and is highly attracted to Spodoptera exigua-induced plant volatiles. The plasticity of C. marginiventris associative learning to volatile blends of various stimuli, such as host presence, also has been shown, but little is known about how this generalist parasitoid distinguishes between host species of varying suitability. Spodoptera exigua is an excellent host that yields high parasitoid emergence, while Trichoplusia ni serves as a sub-optimal host species due to high pre-imaginal wasp mortality. We have found that S. exigua and T. ni induce different volatile blends while feeding on cotton. Here, wind tunnel flight assays were used to determine the importance of differentially induced volatiles in host-finding by C. marginiventris. We found that, while this generalist parasitoid wasp can distinguish between the two discrete volatile blends when presented concurrently, a positive oviposition experience on the preferred host species (S. exigua) is more important than host-specific volatile cues in eliciting flight behavior towards plants damaged by either host species. Furthermore, wasps with oviposition experience on both host species did not exhibit a deterioration in positive flight behavior, suggesting that oviposition in the sub-optimal host species (T. ni) does not cause aversive odor association.     

Preparation and characterization of activated carbon from oil sands coke

Several million tonnes of oil sands coke are generated each year in Alberta, Canada as a by-product of bitumen upgrading. Due to its high carbon content, oil sands coke can be a suitable precursor for the preparation of activated carbon. In this study, delayed and fluid oil sands coke were physically activated in a muffle furnace under select conditions of activation time (2–6 h), temperature (800–900 °C), steam rate (0.3–0.5 mL/min), and activation atmosphere (CO₂, CO₂ + steam, and N₂ + steam). The activated products were characterized using thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, nitrogen adsorption, iodine and methylene blue tests. An increase in activation time and temperature resulted in higher surface areas in both delayed and fluid coke due to an enhanced etching of pores. An increase in steam rate led to the production of the highest specific surface area (577 m²/g) and iodine number (670 mg/g) within delayed coke; whereas, a lower steam rate resulted in the production of the highest specific surface area (533 m²/g) and iodine number (530 mg/g) in activated fluid coke samples.     

Chitosan-based fiber-sponge materials as a promising tool for microalgae harvesting from Lake Baikal

Mass eutrophication of microalgae and cyanobacteria is observed in Lake Baikal in the past decade. In this paper, the concept of replaceable adsorption filter material based on chitosan flocculant filler and chlorinated polyvinyl chloride polymer nonwoven material are proposed. Functional and mechanical properties and morphology of the material are investigated depending on a packing density and a degree of chitosan filling. The introduction of 45% chitosan increases the Young's modulus up to 10 times, and it makes the material more rigid in 2.8 times. The high efficiency of sorption and growth inhibition of cumulative biomass culture was shown. The biomass source is taken from the coast of Barguzinsky Bay of Lake Baikal. Dominant species is microalgae of Scenedesmus genus.