New developments in speciality polymers: polymeric stabilizers

Many new speciality polymers have been developed in the last few years. In this paper polymeric stabilizers (antioxidants, flame retardants and ultraviolet stabilizers) will be discussed. Polymeric antioxidants of the hindered-phenol type, copolymers of 2,6-ditertiarybutyl-4-vinyl(or isopropenyl)phenol with styrene, methyl methacrylate, or more importantly butadiene or isoprene have been prepared; hydrogenation of the latter copolymers gave copolymers of the two polymerizable phenolic antioxidants with ethylene or ethylene/propylene. The polymeric antioxidants have been blended with diene polymers and selected polyolefins and have improved the long-term oxidative stability of these polymers. Polymeric flame retardants have been prepared by copolymerizing styrene and/or acrylonitrile with acrylates and methacrylates of aliphatic bromine-containing alcohols or bromine-containing phenols. Polymers with polymer-bound flame retardants have a higher limiting oxygen index compared with the original polymer. A new class of polymerizable ultraviolet stabilizers has also been developed; these stabilizers are styryl, α-methylstyryl, acryloyl and methacryloyl derivatives of 2(2-hydroxyphenyl)2H-benzotriazoles. These monomers have been copolymerized with styrene, acrylates and methacrylates. 2(2-Hydroxyphenyl)2H-benzotriazoles substituted in the 4 position of the benzotriazole ring with hydroxyl, acetoxy or carboxyl groups suitable for incorporation into polyesters, polycarbonates, polyamides and epoxy resins have also been synthesized. All 2(2-hydroxyphenyl)2H-benzotriazole ultraviolet absorbers and the polymers into which they are incorporated have high light absorbency with γ_max between 330 and 350 nm and extinction coefficients in some cases as high as 4.5 × 10⁴ 1 mol^?1 cm^?1.     

Magnetic separations in biotechnology—a review

Magnetic separation technology has a broad range of potential applications in both small and large scale biotechnology. This review considers a selection of magnetic techniques and their possible uses.     

A multi-purpose CMOS sensor interface for low-power applications

A dedicated low-power CMOS transponder microchip is presented as part of a novel telemetry implant for biomedical applications. This mixed analog-digital circuit contains an identification code and collects information on physiological parameters, i.e., body temperature and physical activity, and on the status of the battery. To minimize the amount of data to be transmitted, a dedicated signal processing algorithm is embedded within its circuitry. All telemetry functions (encoding, modulation, generation of the carrier) are implemented on the integrated circuit. Emphasis is on a high degree of flexibility towards sensor inputs and internal data management, extreme miniaturization, and low-power consumption to allow a long implantation lifetime     

Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

Self-efficacy and work-related performance: The integral role of individual differences.

The present study estimated the unique contribution of self-efficacy to work-related performance controlling for personality (the Big 5 traits), intelligence or general mental ability, and job or task experience. Results, based on a meta-analysis of the relevant literatures, revealed that overall, across all studies and moderator conditions, the contribution of self-efficacy relative to purportedly more distal variables is relatively small. Within moderator categories, there were several cases in which self-efficacy made unique contributions to work-related performance. For example, self-efficacy predicted performance in jobs or tasks of low complexity but not those of medium or high complexity, and self-efficacy predicted performance for task but not job performance. Overall, results suggest that the predictive validity of self-efficacy is attenuated in the presence of individual differences, though this attenuation does depend on the context. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Preliminary irradiation test results from the Yankee Atomic Electric Company reactor vessel test irradiation program

The Yankee Atomic Electric Company test irradiation program was implemented to characterize the irradiation response of representative Yankee Rowe reactor vessel beltline plate materials and to remove uncertainties in the analysis of existing irradiation data on the Yankee Rowe reactor vessel steel. Plate materials each containing 0·24 w/o copper, but different nickel contents at 0·63 w/o and 0·19 w/o, were heat treated to simulate the Yankee vessel heat treatment (austenitized at 982°C (1800°F)) and to simulate Regulatory Guide 1·99 database materials (austenitized at 871°C (1600°F)). These heat treatments produced different microstructures so the effect of microstructure on irradiation damage sensitivity could be tested. Because the nickel content of the test plates varied and the copper level was constant, the effect of nickel on irradiation embrittlement was also tested. Correlation monitor material, HSST-02, was included in the program to benchmark the Ford Nuclear Reactor (University of Michigan Test Reactor) which had never been used before for this type of irradiation program. Materials taken from plate surface locations (versus 1/4T) were included to test whether or not the improved toughness properties of the plate surface layer, resulting from the rapid quench, are maintained after irradiation. If the improved properties are maintained, pressurized thermal shock calculations could utilize this margin. Finally, for one experiment, irradiations were conducted at two irradiation temperatures (260°C and 288°C) to determine the effect of irradiation temperature on embrittlement. The preliminary results of the irradiation program show an average temperature effect of 38°C for a 28°C difference in irradiation temperature. The results suggest that for nickel bearing steels, the superior toughness of plate surface material is maintained after irradiation and for the copper content tested, nickel has little effect on irradiation response. No apparent microstructure effect on irradiation response was noted and the HSST-02 material's response to irradiation was similar to results from power reactor and other test reactor tests, thus qualifying the Ford Test Reactor for irradiation experiments such as those conducted for the Yankee Atomic program.     

Mortar finite element discretization for the flow in a nonhomogeneous porous medium

Darcy’s equations model the flow of a viscous incompressible fluid in a rigid porous medium. One of the parameters of the system depends on the permeability of the medium and, when this medium is not homogeneous, the variations of the parameter could be very high. To handle this phenomenon, we propose a discretization of the model that relies on the mortar finite element method. Indeed, the idea is to construct a decomposition of the domain such that the permeability is constant on each element of the partition and to use independent meshes on the different subdomains. We perform the a priori and a posteriori analysis of this discretization and present some numerical experiments which are in good coherency with the results of the analysis.     

Connective Ethnography for the Exploration of e-Science

E-science comprises diverse sites, connected in complex and heterogeneous ways. While ethnography is well established as a way of exploring the detail of the knowledge production process, some strategic adaptations are prompted by this spatial complexity of e-science. This article describes a study that focused on the biological discipline of systematics, exploring the ways in which use of a variety of information and communication technologies has become a routine part of disciplinary practice. The ethnography combined observation and interviews within systematics institutions with mailing list participation, exploration of web landscapes, and analysis of expectations around information and communications technologies as portrayed in policy documents. Exploring connections among these different activities offers a means of understanding multiple dimensions of e-science as a focus of practice and policy. It is important when studying e-science to engage critically with claims about the transformative capacity of new technologies and to adopt methodologies that remain agnostic in the face of such claims: A connective approach to ethnography offers considerable promise in this regard.     

Is the chest radiograph a reliable tool in the assessment of tumor response after radiotherapy in nonsmall cell lung carcinoma?

BACKGROUND: The purpose of this study was to evaluate whether the chest radiograph is a reliable tool to assess response to radiotherapy. MATERIALS AND METHODS: Pre- and post-treatment chest radiographs and computed tomographs (CT) of 63 patients with nonsmall cell lung cancer (NSCLC) treated by radiotherapy were reviewed by four observers with regard to suitability for tumor measurement, and response. Suitability for tumor measurement was expressed as the number of measurable diameters. In addition, the consequences to clinical outcome were studied by survival analysis. RESULTS: The CT turned out to be more suited for tumor measurement before as well as after radiotherapy, resulting in an increase of the number of measurable cases. The number of measurable cases with CT was 52 (83%) as compared to 28 (44%) with chest radiography. Especially in case of centrally localized tumors, the presence of an atelectasis, or squamous cell carcinoma, CT contributed to a higher rate of measurable cases. The interobserver agreement with regard to response using chest radiograph was good (mean kappa = 0.74). In 25 of 28 cases (89%) measurable with CT as well as with chest radiograph, response was equally classified. When CT was used, the median survival of the responders was 14.2 months as compared to 6.8 months of the nonresponders. When chest radiograph was used, the median survival of these groups was 12.0 and 6.6 months respectively, which was not significantly different when response was assessed by CT. CONCLUSION: We conclude that CT is more suited for tumor measurement because more measurable lesions can be found and more evaluable lesions on chest radiograph become measurable on CT. The chest radiograph does have a valuable role to play in those lesions that are measurable because of the good interobserver agreement with regard to the response classification, the high overall agreement between CT and chest radiograph in case of measurable cases, and the lack of important differences with regard to survival.