Drag Power Loss Investigation in Cylindrical Roller Bearings Using CFD Approach

In high-speed rolling element bearings, the drag forces can be prominent and it is demonstrated in this investigation that the classical models may not be appropriate for correctly estimating this power loss contribution. A modification of the models is thus proposed, including the usual drag forces formulation relying upon the drag coefficient to be evaluated from a numerical computational fluid dynamics (CFD) approach. A three-dimensional approach that considers both the rings and the cylinder ends seems the only adequate approach to be used because a two-dimensional approach predicts a drag coefficient value that is too low. When using the former computed drag coefficient for the evaluation of the total power losses, high values of oil volume fraction must be employed to recover the measured power losses.     

Crack initiation,propagation, and arrest in sintering powder aggregates

Cracking during sintering is a common problem in powder processing and is usually caused by constraint that prevents the sintering material from shrinking in one or more directions. Different factors influence sintering-induced cracking, including temperature schedule, packing density, and specimen geometry. Here we use the discrete element method to directly observe the stress distribution and sinter-cracking behavior in edge notched panels sintered under a uniaxial restraint. This geometry allows an easy comparison with traditional fracture mechanics parameters, facilitating analysis of sinter-cracking behavior. We find that cracking caused by self-stress during sintering resembles the growth of creep cracks in fully dense materials. By deriving the constrained densification rate from the appropriate constitutive equations, we discover that linear shrinkage transverse to the loading axis is accelerated by a contribution from the effective Poisson's ratio of a sintering solid. Simulation of different notch geometries and initial relative densities reveals conditions that favor densification and minimize crack growth, alluding to design methods for avoiding cracking in actual sintering processes. We combine the far-field stress and crack length to compute the net section stress, finding that it characterizes the stress profile between the notches and correlates with the sinter-crack growth rate, demonstrating its potential to quantitatively describe sinter-cracking.     

Presentation of a mixed reality software with a HoloLens headset for a nutrition workshop

Multimedia Tools and Applications - Microsoft has recently released a mixed reality headset called HoloLens. This semi-transparent visor headset allows the user who wears it to view the projection...     

Dynamic tabletop interfaces for increasing creativity

We designed a tabletop brainwriting interface to examine the effects of time pressure and social pressure on the creative performance. After positioning this study with regard to creativity research and human activity in dynamic environments, we present our interface and experiment. Thirty-two participants collaborated (by groups of four) on the tabletop brainwriting task under four conditions of time pressure and two conditions of social pressure. The results show that time pressure increased the quantity of ideas produced and, to some extent, increased the originality of ideas. However, it also deteriorated user experience. Besides, social pressure increased quantity of ideas as well as motivation, but decreased collaboration. We discuss the implications for creativity research and Human–Computer Interaction. Anyhow, our results suggest that the Press factor, operationalized by Time- or Social-pressure, should be considered as a powerful lever to enhance the effectiveness of creative problem solving methods.     

Multiparametric analysis within the proper generalized decomposition framework

Optimization campaigns, which are being launched more and more often, require the execution of many parametric studies which can make the approach very costly in terms of computation time. Here, in order to reduce these computation times, we undertake to develop a multiparametric strategy using the LATIN method along with Proper Generalized Decomposition. This approach is compared to other common strategies, especially those based on POD.     

Osmotic Dehydration Kinetics of Pomegranate Seeds Using Date Juice as an Immersion Solution Base

Pomegranate seeds were osmodehydrated using date juice added with sucrose (final °Brix, 55) as immersion solution. The kinetics of osmotic dehydration showed that the most significant changes of mass transfer took place during the first 20 min of the process, regardless of date juice varieties. During this time, seed water loss and solid gain were estimated to be ∼39% and ∼6%, respectively. After 20 min of the process, the percentage of water loss and solid gain varied slightly and ranged on average close to ∼40% and ∼9%, respectively. During osmotic dehydration, there was a leaching of natural solutes from seeds into the solution, which is quantitatively not negligible, and might have an important impact on the sensorial and nutritional value of seeds and date juices. Both scanning electron microscopy and texture (compression) analysis revealed that osmotic dehydration process induced modifications of seed texture and cell structure. Sucrose was found to be the essential element which influences the texture of seed and the viscosity of date juice. Additionally, natural sugar present in date juice permits substituting 35% of the total quantity of sucrose added to the osmotic solution.     

Experimental Data Highlighting the Role of Surface Fracture Energy in Quasi-Static Confined Comminution

Since the pioneering work of Griffith, Linear Elastic Fracture Mechanics has been widely experimentally validated and successfully developed in solid mechanics modeling. However, recent theoretical models applying the energy balance found in Griffith theory specifically for quasi-static confined comminution have until now not been systematically confronted to experiments. In this study, we analyze data of compression tests on crushable sand, where grain breakage has been triggered by flooding the initially dry material at constant stresses. We consider a partition of the dissipation between surface fracture energy and the rearrangement of fragments and grains surrounding crushed particles. Our results show that the role of the surface fracture energy is stressdependent and that its influence becomes less significant at high stresses.     

Process and performance optimization by selective assembly of battery electrodes

The increasing demand for electric vehicles and thus lithium-ion batteries results in a multitude of challenges in production technology. The reproducibility and performance of large scale batteries for automotive applications are very high. At the same time the production processes are complex and involve many uncertainties. Two essential process steps are the electrode coating and electrode package assembly. The mass loading of anodes and cathodes are determined by the coating process, where deviations can be caused by different reasons. The selective assembly of the electrodes is a reasonable way to balance the production variances. The contribution shows extended algorithms and their benefits and drawbacks of matching electrodes in order to improve the subsequent electrode packaging process. Here, the aim is to reach higher cell capacities and optimized performance values by “optimally” balanced electrodes regarding the mass loading ratio, which is also related to the specific material capacity.     

Interfacial bonding of Flax fibre/Poly(l-lactide) bio-composites

The use of glass fibre reinforced polyester composites raises many health and safety and environmental questions. One alternative is the development of high performance bio-based bio-composites with low environmental impact. Improved understanding of interfacial properties is essential to optimise the mechanical properties and durability of these materials, but so far few data are available. The present work describes the interfacial characterization of Flax fibre/Poly(lactic) acid (PLLA) system at the micro-scale using the microbond test. Different thermal treatments have been carried out (cooling rate and annealing) in order to evaluate the influence of matrix and interfacial morphologies as well as residual stress on interfacial properties. Micromechanical models have been used to determine the interfacial shear strength. When cooling rate is slow, improved interfacial properties are observed.