Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

Advanced disturbance observer design for mechanical positioning systems

Disturbance-observer (DOB)-based controller design is one of the most popular methods in the field of motion control. In this paper, the generalized disturbance compensation framework, named the robust internal-loop compensator (RIC) is introduced and an advanced design method of a DOB is proposed based on the RIC. The mixed sensitivity optimization problem, which is the main issue of DOB design, is also solved through the parametrization of the DOB in the RIC framework. Differently from conventional methods, the Q-filter is separated from the mixed sensitivity optimization problem and a systematic design law for the DOB is proposed. This guarantees the robustness and optimality of the DOB and enables the design for unstable plants.     

Correlation of fecundability and serum estradiol after danazol treatment in patients with advanced endometriosis

OBJECTIVE: To examine the relationship between pregnancy incidence and the level of serum E2 during danazol therapy. DESIGN: Danazol was given by 200 mg four times daily for 3 months. Serum E2 level was checked after completing the therapy, but before stopping medication. Patients then were advised to conceive at the appropriate time over a 6-month period. SETTING: Reproductive and Endocrine Laboratory of the Department of Obstetrics and Gynecology, Keelung Chang Gung Memorial Hospital, Keelung, Taiwan. PATIENTS: Infertile women with invasive endometriosis receiving conservative surgery and danazol treatment. INTERVENTIONS: Serum E2 is checked before medication and at the end of danazol therapy, but before stopping medication. MAIN OUTCOME MEASURES: Whether pregnancy is related to the change of serum E2 caused by danazol therapy. RESULTS: There were 24 pregnancies in 38 patients with invasive endometriosis after treatment. Pregnant patients had significantly lower serum E2 levels as compared with the nonpregnant patients. CONCLUSIONS: After conservative surgery for invasive endometriosis associated with infertility, the therapeutic period of danazol treatment could be shortened to 3 months. Because there is significant correlation of fecundability and serum E2 after danazol medication, serum E2 could be a guideline for predicting pregnancy or for prolonging or changing of treatment after danazol therapy.     

Diagnosis and correction of multiple logic design errors in digitalcircuits

This paper presents a technique to correct multiple logic design errors in a gate-level netlist. A number of methods have been proposed for correcting single logic design errors. However, the extension of these methods to more than one error is still very limited. We direct our attention to circuits with a low multiplicity of errors. By assuming different error dependency scenarios, multiple errors are corrected by repeatedly applying a single error search and correction algorithm. Experimental results on correcting double-design errors and triple-design errors on ISCAS and MCNC benchmark circuits are included     

Characterization method of thermomechanical parameters for microelectronic materials

Reliability of thermomechanical simulations is critically linked to the accuracy of the mechanical properties that govern the behaviour of structure, like Young's modulus (E) and coefficient of thermal expansion (CTE). For many cases, the values found in literatures are dealing with bulk properties without detailed information on temperature effects. To address such issues, it is necessary to measure the materials parameters as a function of temperature. The measurement of CTE is usually accomplished by evaluating the thermal deflections of a subjected material layer deposited on a substrate, providing that E is known at a specific temperature of experiment. A bilayer method, based on theory of elasticity, is proposed to determine both E and CTE for a given temperature with a good resolution. This paper presents the theoretical analysis, the design and process of the microsystem test structures, and the main calculation results.     

End-User Computing in a CASE Environment

Computer-aided software engineering (CASE) tools are currently being used by IS professionals rather than by users. No matter how effective these tools may be, however, they will not be able to assist in the reduction of application backlogs without supporting user-driven applications. This article examines characteristics of a CASE environment from the various perspectives of decision support, identifies the advantages and limitations of end-user computing in this environment, and suggests how IS managers can realize the potentials of CASE for user applications.     

Use of polymers for cement-based structural materials

Cement-based materials are widely used in the civil infrastructure. Polymers as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements. Polymeric admixtures include particles, short fibers and organic liquids. Latex in the form of an aqueous particle dispersion is most common. Other than being used as admixtures, polymers are used as partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection.     

High performance biofilm process for treating wastewater discharged from coal refining plants containing nitrogen, cyanide and thiocyanate.

Wastewater discharge from coal refining plants contains a number of biologically toxic compounds; 2000-2500 mg/l of COD of which 40% is composed of phenol, 100-400 mg/l of thiocyanate, 10-40 mg/l of cyanide, 100-250 mg/l of NH4+-N and 150-300 mg/l of total nitrogen. In order to treat this kind of high strength wastewater, we have developed a high performance biofilm process using fluidizing bio-carriers of the tube chip type. The fluidizing biofilm carriers are made of a composite of polyethylene and several inorganic materials, whose density is controlled at 0.97-0.98 g/ml. The fluidizing biofilm carriers show sound fluidization characteristics inside bioreactors. The wastewater is treated using three consecutive series reactors in oxic-anoxic-oxic arrangement. Each reactor is charged with the fluidizing biofilm carriers of 50 vol%. Furthermore, newly cultured active microorganisms for the thiocyanate biodegradation are added in the biofilm process. At total hydraulic retention time of 2.2 days, this process can achieve steady state removal efficiencies: COD, 99%; thiocyanate, 99%; NH4+-N, 99% and total nitrogen, 90%.