Historical perspective of heavy metals contamination (Cd, Cr, Cu, Hg, Pb, Zn) in the Seine River basin (France) following a DPSIR approach (1950-2005)

The Driver-Pressures-State-Impact-Response approach is applied to heavy metals in the Seine River catchment (65,000 km(2); 14 million people of which 10 million are aggregated within Paris megacity; 30% of French industrial and agricultural production). The contamination pattern at river mouth is established on the particulate material at different time scales: 1930-2000 for floodplain cores, 1980-2003 for suspended particulate matter (SPM) and bed-sediments, 1994-2003 for atmospheric fallout and annual flood deposits. The Seine has been among the most contaminated catchments with maximum contents recorded at 130 mg kg(-1) for Cd, 24 for Hg, 558 for Pb, 1620 for Zn, 347 for Cu, 275 for Cr and 150 for Ni. Today, the average levels for Cd (1.8 mg kg(-1)), Hg (1.08), Pb (108), Zn (370), Cu (99), Cr (123) and Ni (31) are much lower but still in the upper 90% of the global scale distribution (Cr and Ni excepted) and well above the natural background values determined on pre-historical deposits. All metal contents have decreased at least since 1955/65, well before metal emission regulations that started in the mid 1970's and the metal monitoring in the catchment that started in the early 1980's. In the last 20 y, major criteria changes for the management of contaminated particulates (treated urban sludge, agricultural soils, dredged sediments) have occurred. In the mid 1990's, there was a complete shift in the contamination assessment scales, from sediment management and water usage criteria to the good ecological state, now required by the 2000 European Directive. When comparing excess metal outputs, associated to river SPM, to the average metal demand within the catchment from 1950 to 2000, the leakage ratios decrease exponentially from 1950 to 2000 for Cd, Cr, Cu, Pb and Zn, meanwhile, a general increase of the demand is observed: the rate of recycling and/or treatment of metals within the anthroposphere has been improved ten-fold. Hg environmental trajectory is very specific: there is a marked decontamination from 1970 to 2000, but the leakage ratio remains very high (10 to 20%) during this period. Drivers and Pressures are poorly known prior to 1985; State evolution since 1935 has been reconstructed from flood plain cores analysis; Impacts were maximum between 1950 and 1970 but remained unknown due to analytical limitation and lack of awareness. Some Responses are lagging 10 y behind monitoring and have much evolved in the past 10 y.     

Hydrocarbons in the Ant <Emphasis Type="Italic">Lasius niger</Emphasis>: From the Cuticle to the Nest and Home Range Marking

The cuticular hydrocarbons (CHCs) of the ant Lasius niger are described. We observe a high local colony specificity of the body cuticular profile as predicted for a monogynous and multicolonial species. The CHCs show a low geographical variation among different locations in France. The CHCs on the legs also are colony specific, but their relative quantities are slightly different from those on the main body. For the first time, we demonstrate that the inner walls of the ant nest are coated with the same hydrocarbons as those found on the cuticle but in different proportions. The high amount of inner-nest marking and its lack of colony-specificity may explain why alien ants are not rejected once they succeed in entering the nest. The cuticular hydrocarbons also are deposited in front of the nest entrance and on the foraging arena, with a progressive increase in n-alkanes relative amounts. Chemical marks laid over the substrate are colony specific only when we consider methyl-branched alkanes. Our data confirm that these “footprint hydrocarbons” are probably deposited passively by the contact of ant tarsae with the substrate. These results suggest that the CHCs chemical profiles used by ants in colony recognition are much more complex than a single template: ants have to learn and memorize odors that vary depending on their context of perception.     

The influence of internal stresses on the fracture toughness of α/β titanium alloys

The influence of internal stresses on fracture toughness was investigated in α/β titanium alloys. It was shown that the direct linkage of K _IC to various microstructural parameters was not so conclusive, since the different parameters act simultaneously on fracture toughness. On the contrary, the metallurgical parameters change the plastic strain incompatibilities inside the material. Thus X, which is a macroscopic measurement of these incompatibilities, is the relevant parameter to account for the different metallurgical influences on toughness. The influence on X of the α-phase percentage, aspect ratio, and the secondary α-phase percentage was determined, and it was established that low internal stresses could provide high fracture toughness. The present work also showed the ability of a modified Gurson-Tvergaard (GT) model to calculate the experimental K _IC value.     

Books and Software: A fitting tribute to Cal Giddings

A review of Advances in Chromatography, Vol. 38.     

Maternal sensitivity during infancy and subsequent life events relate to attachment representation at early adulthood.

A prospective longitudinal research study of 86 prematurely born children from birth to age 18 years provided empirical evidence for continuity from infancy experience to representations of attachment at age 18 years. Young adults whose representation of attachment was dismissing had been objectively observed during infancy, 16–17 years earlier, to receive less sensitive maternal care than those infants who were later judged at early adulthood to have secure or preoccupied representations. Infancy experience alone did not differentiate young adults with secure representations from those with preoccupied representations. Rather, adverse life events through age 12, particularly parental divorce, reduced the likelihood of secure representations and increased the likelihood of preoccupied representations. The absence of adverse life events did not increase the likelihood of security for those who had not experienced early sensitive caregiving. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The impact of Ti and temperature on the stability of Nb5Si3 phases: a first-principles study

Abstract

Nb-silicide based alloys could be used at T > 1423 K in future aero-engines. Titanium is an important additive to these new alloys where it improves oxidation, fracture toughness and reduces density. The microstructures of the new alloys consist of an Nb solid solution, and silicides and other intermetallics can be present. Three Nb₅Si₃ polymorphs are known, namely αNb₅Si₃ (tI32 Cr₅B₃-type, D8_l), βNb₅Si₃ (tI32 W₅Si₃-type, D8_m) and γNb₅Si₃ (hP16 Mn₅Si₃-type, D8₈). In these 5–3 silicides Nb atoms can be substituted by Ti atoms. The type of stable Nb₅Si₃ depends on temperature and concentration of Ti addition and is important for the stability and properties of the alloys. The effect of increasing concentration of Ti on the transition temperature between the polymorphs has not been studied. In this work first-principles calculations were used to predict the stability and physical properties of the various Nb₅Si₃ silicides alloyed with Ti. Temperature-dependent enthalpies of formation were computed, and the transition temperature between the low (α) and high (β) temperature polymorphs of Nb₅Si₃ was found to decrease significantly with increasing Ti content. The γNb₅Si₃ was found to be stable only at high Ti concentrations, above approximately 50 at. % Ti. Calculation of physical properties and the Cauchy pressures, Pugh’s index of ductility and Poisson ratio showed that as the Ti content increased, the bulk moduli of all silicides decreased, while the shear and elastic moduli and the Debye temperature increased for the αNb₅Si₃ and γNb₅Si₃ and decreased for βNb₅Si₃. With the addition of Ti the αNb₅Si₃ and γNb₅Si₃ became less ductile, whereas the βNb₅Si₃ became more ductile. When Ti was added in the αNb₅Si₃ and βNb₅Si₃ the linear thermal expansion coefficients of the silicides decreased, but the anisotropy of coefficient of thermal expansion did not change significantly.     

Executive function and theory of mind: Predictive relations from ages 2 to 4.

Despite robust associations between children's theory of mind (ToM) and executive function (EF) skills, longitudinal studies examining this association remain scarce. In a socially diverse sample of 122 children (seen at ages 2, 3, and 4), this study examined (a) developmental stability of associations between ToM, EF, verbal ability, and social disadvantage; (b) continuity and change in ToM and EF; and (c) predictive relations between ToM and EF. Verbal ability and social disadvantage independently predicted changes in EF (but not ToM). Task scores improved with age and showed stable individual differences. The authors examined predictive relations between ToM and EF using partial correlations (controlling for age and verbal ability) and hierarchical regressions (that also controlled for social disadvantage and initial ToM and EF). The findings provide only partial support for the view that ToM is a prerequisite for EF but stronger support for the proposal that EF facilitates children's performance on ToM tasks. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Evaluating the Costs and Benefits of Salt Management Strategies at Mine Sites Using a Systems Model

Unprecedented expansion of coal mining in Australia is occurring within the context of a severe ongoing drought. This has induced more companies to adopt improved water management strategies, such as water reuse. A direct consequence of this is an increase in the salt concentration of the water, which affects in turn the efficiency of the coal preparation processes, the quality of the coal product, and the level of required equipment maintenance. There are three strategies that can be adopted with respect to salt management: accept the elevated salt concentrations and increase spending on equipment maintenance; remove the salt by desalination; and dilute the salt by importing more water. A tool is required to predict the salt concentrations arising from water reuse and to simulate the impact of potential management strategies. This paper presents a systems approach to the modelling of coupled mine site water and salt balances to assist with understanding the implications of implementing desalination or dilution and with assessing the costs and benefits of each option.     

The Role of Feedback Information for Calibration and Attunement in Perceiving Length by Dynamic Touch.

Two processes have been hypothesized to underlie improvement in perception: attunement and calibration. These processes were examined in a dynamic touch paradigm in which participants were asked to report the lengths of unseen, wielded rods differing in length, diameter, and material. Two experiments addressed whether feedback informs about the need for reattunement and recalibration. Feedback indicating actual length induced both recalibration and reattunement. Recalibration did not occur when feedback indicated only whether 2 rods were of the same length or of different lengths. Such feedback, however, did induce reattunement. These results suggest that attunement and calibration are dissociable processes and that feedback informs which is needed. The observed change in variable use has implications also for research on what mechanical variables underlie length perception by dynamic touch. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

3-D discrete analytical ridgelet transform.

In this paper, we propose an implementation of the 3-D Ridgelet transform: the 3-D discrete analytical Ridgelet transform (3-D DART). This transform uses the Fourier strategy for the computation of the associated 3-D discrete Radon transform. The innovative step is the definition of a discrete 3-D transform with the discrete analytical geometry theory by the construction of 3-D discrete analytical lines in the Fourier domain. We propose two types of 3-D discrete lines: 3-D discrete radial lines going through the origin defined from their orthogonal projections and 3-D planes covered with 2-D discrete line segments. These discrete analytical lines have a parameter called arithmetical thickness, allowing us to define a 3-D DART adapted to a specific application. Indeed, the 3-D DART representation is not orthogonal, It is associated with a flexible redundancy factor. The 3-D DART has a very simple forward/inverse algorithm that provides an exact reconstruction without any iterative method. In order to illustrate the potentiality of this new discrete transform, we apply the 3-D DART and its extension to the Local-DART (with smooth windowing) to the denoising of 3-D image and color video. These experimental results show that the simple thresholding of the 3-D DART coefficients is efficient.