HDPE/LLDPE reactor blends with bimodal microstructures—Part II: rheological properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and vice versa HMW homopolymer to LMW copolymer. The shear flow characteristics of these polymers in the typical processing range mostly depend on the molecular weight and MWD of the polymer and are independent of the short chain branch content. From oscillatory shear measurements, it was observed that the viscosity of HMW polymers was reduced with the addition of LMW material. For the polymers produced with this two-step polymerization process, the LMW homopolymer and HMW copolymer blends and HMW homopolymer and LMW copolymer blends were melt miscible, despite the large viscosity differences of the pure components.     

Test-data generation for control coverage by proof

Many tools can check if a test set provides control coverage; they are, however, of little or no help when coverage is not achieved and the test set needs to be completed. In this paper, we describe how a formal characterisation of a coverage criterion can be used to generate test data; we present a procedure based on traditional programming techniques like normalisation, and weakest precondition calculation. It is a basis for automation using an algebraic theorem prover. In the worst situation, if automation fails to produce a specific test, we are left with a specification of the compliant test sets. Many approaches to model-based testing rely on formal models of a system under test. Our work, on the other hand, is not concerned with the use of abstract models for testing, but with coverage based on the text of programs.     

The annual cycle of Flehmen in black-tailed deer (Odocoileus hemionus columbianus)

Flehmen is a stereotyped response of ungulates and other mammals to urine. In black-tailed deer, Flehmen occurs typically in males (rarely in females), and its frequency shows an annual cycle. Flehmen in response to female urine was most frequent in November, and to male urine in January. The response minimum to both types of urine occurred in May. Fifty-five to 100% of initial responses to female urine resulted in Flehmen. The deer responded more often to female urine, and the difference between the responses to female and male urine increased from May to November. A male's own urine released Flehmen more often than did urine of other males. The response intensity varied with the spatial orientation of the male to the urinating female, and responses were usually limited to distances of 15 m or less.     

Occurrence of wax esters in the tissues of the organge roughy (Hoplostethus atlanticus)

The skin, skeleton and a fat-filled swim bladder of the orange roughy (Hoplostethus atlanticus) each contained greater than 20% lipid by wet weight which was almost entirely wax esters. These had carbon numbers of 34–40 consistent with the major fatty acid being 18∶1 and the major fatty alcohols being 16∶0, 18∶1, 20∶1 and 22∶1. In contrast, the liver and the roe contained appreciable quantities of glycerolipids with 18∶1 and 22∶6 as the major fatty acids.     

Responses of the Aphids Phorodon humuli and Rhopalosiphum padi to Sex Pheromone Stereochemistry in the Field

Gynoparous female and male damson-hop aphids, Phorodon humuli (Schrank), were caught in the field by water traps that were releasing the sex pheromone of this species, (1RS,4aR,7S,7aS)-nepetalactol. No behavioral activity was elicited by (4aS,7S,7aR)-nepetalactone, the major sex pheromone component of other aphid species such as Megoura viciae Buckton, even though olfactory cells were found in the secondary rhinaria on the third antennal segment of P. humuli that responded strongly to this compound. Gynoparous female P. humuli in the field responded less strongly to (1R,4aS,7S,7aR)-nepetalactol, the sex pheromone of the bird cherry-oat aphid, Rhopalosiphum padi (L.), than they did to the (4aR,7S,7aS)-nepetalactols, but males responded only to the latter. The (4aR,7S,7aS)-nepetalactone showed no electrophysiological activity so was not used in field trials. Releasing either the (4aS,7S,7aR)-nepetalactone or the (1R,4aS,7S,7aR)-nepetalactol with the (4aR,7S,7aS)-nepetalactols did not inhibit the response of P. humuli gynoparous females and males to the latter. Males of R. padi responded as strongly to the (4aR,7S,7aS)-nepetalactols as they did to (1R,4aS,7S,7aR)-nepetalactol. Males of P. humuli and R. padi responded positively to an increased concentration of the (4aR,7S,7aS)-nepetalactols released from two vials compared with that from a single vial, as did P. humuli (in one of two experiments) and R. padi to the (1RS,4aR,7S,7aS)- and (1R,4aS,7S,7aR)-nepetalactols when released together.     

Biochemical activities during lipid accumulation inCandida curvata

Intracellular and extracellular concentrations of citrate and the specific activities of ten different enzymes in Candida curvata D were examined in relation to lipid biosynthesis in batch and continuous culture. Citrate was found to accumulate prior to lipid production and declined markedly as lipid accumulated in batch culture. The cells excreted citrate as the culture became nitrogen-limiting after 30 hr of growth, but little more was expelled after 40 hr when lipid accumulation was more marked. In continuous culture, only low levels of citrate were detected at the lower dilution rates and citrate was completely absent from both the cells and medium above a dilution rate of 0.1/hr. The activity of malic enzyme, malate dehydrogenase and ATP:citrate lyase increased in batch culture on lipid accumulated and, in continuous culture, both malic enzyme and ATP:citrate lyase varied in parallel with the specific rate of lipid synthesis which increased with increasing dilution rate. Activity of malate dehydrogenase, citrate synthase and glucose-6-phosphate dehydrogenase decreased with increasing dilution rate. The regulatory significance of these enzymes in lipid accumulation by C. curvata is discussed.     

HDPE/LLDPE reactor blends with bimodal microstructures—part I: mechanical properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and, vice versa, HMW homopolymer to LMW copolymer. The physical properties of the blends were found to be consistent with the nature of the individual components. For the tensile properties, the stiffness decreases with increasing the fraction of the copolymer, regardless of the molecular weight of the homopolymer fraction. For these blends with bimodal microstructures, it was confirmed that the degree of crystallinity governs the stiffness of the polymer. However, the energy dampening properties of the polymers benefit from the presence of the copolymer. A balance of stiffness and toughness can be obtained by altering the composition of the blends. For some blends, the presence of HMW homopolymer can dominate the tensile properties, showing little variation in the stiffness with increased addition of copolymer. It was also demonstrated that the testing conditions and thermal treatment of the polymer greatly influence the resulting elastic and energy dampening properties. Depending on the desired application, annealing these polymers (especially very low density copolymers) not only increases the crystallinity and stiffness, but also changes the frequency response of the dynamic mechanical properties.     

The Electrolytic “Sintering” of Nickel Powder

Adherent and coherent deposits of nickel sponge similar to sintered nickel may be made from sulphate, chloride, fluoborate or sulphamate nickel plating solutions containing nickel powder in suspension, providing the concentration of free acid is maintained sufficiently high to inhibit co-depesition of Ni(OH) In nitrate solution, cathodic reduction of nitrate and deposition of Ni(OH)₂ predominates.     

Analysis of impersonation attacks on systems using RF fingerprinting and low-end receivers

Recently, physical layer security commonly known as Radio Frequency (RF) fingerprinting has been proposed to provide an additional layer of security for wireless devices. A unique RF fingerprint can be used to establish the identity of a specific wireless device in order to prevent masquerading/impersonation attacks. In the literature, the performance of RF fingerprinting techniques is typically assessed using high-end (expensive) receiver hardware. However, in most practical situations receivers will not be high-end and will suffer from device specific impairments which affect the RF fingerprinting process. This paper evaluates the accuracy of RF fingerprinting employing low-end receivers. The vulnerability to an impersonation attack is assessed for a modulation-based RF fingerprinting system employing low-end commodity hardware (by legitimate and malicious users alike). Our results suggest that receiver impairment effectively decreases the success rate of impersonation attack on RF fingerprinting. In addition, the success rate of impersonation attack is receiver dependent.     

Mobility of trace elements from selected Australian fly ashes and its potential impact on aquatic ecosystems

Batch leaching tests have been performed on fly ashes collected from four Australian power stations fuelled by chemically different coals. Two acidic and two alkaline fly ashes were subjected to long-term (144 h) leaching tests, and the behaviour of As, B, Mo and Se was investigated to obtain data on their potential for mobilisation during fly ash-water interactions. All four elements are mobile under different conditions and over different leaching times. The concentrations of these elements released in leaching solutions with initial pH values of 4, 7 and 10 were used to assess the influence of pH conditions on element mobility from the acidic and alkaline fly ashes. The most mobile of the four elements leached were Mo from alkaline fly ashes and B from acidic fly ashes. Arsenic concentration increased with time in leachate solutions from acidic and alkaline fly ashes; however, in solutions in contact with alkaline fly ashes the As concentration, after reaching a maximum, later decreased with time. Selenium mobility shows a similar pattern to that of As, with similar leaching concentrations. Boron has the highest relative mobility of all four elements. A process possibly responsible for the decrease in concentration of B, As and Se in alkaline leaching solutions is the formation of ettringite. Equilibrium between the solid phase (ash) and the leaching solution was not reached in any of the leaching experiments. The pH of the leaching solution is the key factor affecting the mobility of these trace elements in these fly ashes.