Sn-Ag-Cu solders and solder joints: Alloy development, microstructure, and properties

Slow cooling of Sn-Ag-Cu and Sn-Ag-Cu-X (X = Fe, Co) solder-joint specimens made by hand soldering simulated reflow in surface-mount assembly to achieve similar as-solidified joint microstructures for realistic shearstrength testing, using Sn-3.5Ag (wt.%) as a baseline. Minor substitutions of either cobalt or iron for copper in Sn-3.7Ag-0.9Cu refined the joint matrix microstructure, modified the Cu₆Sn₅ intermetallic phase at the copper substrate/solder interface, and increased the shear strength. At elevated (150°C) temperature, no significant difference in shear strength was found in all of the alloys studied. Ambient temperature shear strength was reduced by largescale tin dendrites in the joint microstructure, especially by the coarse dendrites in solute poor Sn-Ag-Cu.     

Water Governance in Canada: Innovation and Fragmentation

This paper explores Canada's approach to water governance. It argues that fragmented governance has had negative impacts on Canada's ability to manage water resources adequately (particularly in the context of urbanization, agriculture and resource extraction), and to deal with new issues (such as climate change). Further, it argues that Canada's highly decentralized approach to water governance creates challenges of integration, coordination and data availability. The paper explores possible future strategies for innovations in water governance that may have the potential to improve water management outcomes.     

Assessing Decentralised Water Solutions: Towards a Framework for Adaptive Learning

This paper reports on the use of qualitative analysis to inform a risk analysis framework for decentralised water systems. To realise the benefits from these technologies, a methodology is applied to learn from previous difficulties in implementing and managing them. A workshop process was used to capture stories from industry professionals on difficulties they have encountered in planning and implementation. Qualitative analysis of story narratives revealed stages where there was some type of development process failure; as well as failure modes and factors influencing the difficulties encountered. The analysis also generated insights: difficulties in one part of the development process tends to propagate to subsequent stages; system difficulties most often occurred in the policy stage of development due to institutional inertia and lack of adaptive governance; and the best indicator of problems with a decentralised system was complaints of poor water quality. Furthermore, this paper also provides a method to learn from past difficulties by identifying what data needs to be collected in order to populate a risk model which can be used for improving risk assessment of the development process for decentralised systems. This can provide a basis for better decision making, policy and guidelines; an important factor in mainstream acceptance.     

Elastic block ciphers: method, security and instantiations

We introduce the concept of an elastic block cipher which refers to stretching the supported block size of a block cipher to any length up to twice the original block size while incurring a computational workload that is proportional to the block size. Our method uses the round function of an existing block cipher as a black box and inserts it into a substitution- permutation network. Our method is designed to enable us to form a reduction between the elastic and the original versions of the cipher. Using this reduction, we prove that the elastic version of a cipher is secure against key-recovery attacks if the original cipher is secure against such attacks. We note that while reduction-based proofs of security are a cornerstone of cryptographic analysis, they are typical when complete components are used as sub-components in a larger design. We are not aware of the use of such techniques in the case of concrete block cipher designs. We demonstrate the general applicability of the elastic block cipher method by constructing examples from existing block ciphers: AES, Camellia, MISTY1, and RC6. We compare the performance of the elastic versions to that of the original versions and evaluate the elastic versions using statistical tests measuring the randomness of the ciphertext. We also use our examples to demonstrate the concept of a generic key schedule for block ciphers.

Postural support strategies of disabled drivers and the effectiveness of postural support aids

The paper discusses a series of driving trials that were conducted to investigate postural stability of disabled drivers and to assess the effectiveness of a representative sample of support aids. Twenty-three disabled drivers with varying levels of physical disability and seven non disabled drivers participated in the study. The test car was equipped with transducers to measure vehicle velocity and acceleration (longitudinal and lateral), steering wheel movement and torque, and the bracing forces exerted by the driver on the steering wheel. Video cameras were installed to record postural support strategies and displacement of the driver and to record deviation of the car from the specified path. Subjective data regarding driver attitudes and acceptance were also collected through the administration of questionnaires. Findings from the study showed that support aids significantly improved driving performance and reduced physical exertion to maintain an upright driving position for disabled drivers. However, ergonomics design aspects regarding the ease of use and acceptance of the support aids by the end users were identified as obstacles to their sustained use in everyday driving.     

The effect of electrical head-only stun duration on electroencephalographic-measured seizure and brain amino acid neurotransmitter release

Effective electrical head-only stunning produces a seizure-like state followed by a period of analgesia seen in animals allowed to recover. Passing of a 1·0 A current (50 Hz, 500 V) for less than 0·2 s, through the head of a sheep does not produce a seizure-like state as evidenced by recorded electroencephalogram. Corresponding to this lack of seizure-like state, the release of the neurotransmitters glutamate and aspartate, in the brain, occurs to levels associated with arousal rather than seizure. At a duration of 0·2 s, the same stun parameters as above produce a seizure-like state and the release of glutamate and aspartate rises dramatically. The length of the seizure-like state, and the levels of release of glutamate, aspartate and a third neurotransmitter gamma amino-4-butyric acid (GABA), increased with stun duration until 4·0 s duration, where a peak in these parameters was seen. Stun durations of 2·0, 4·0, 8·0 and 12·0 s all produce similar effects. At a duration of 20 s, however, the length of the seizure-like state and the release of neurotransmitters is less than at shorter stun durations. For welfare purposes a head-only electrical stun, of 1·0 A, at a duration as low as 0·2 s produces unconsciousness and analgesia to subsequent slaughter procedures. However, maximum welfare benefits appear attainable at durations between 2·0 and 20·0 s.     

Synthesis and evaluation of analogues of the partial agonist 6-(propyloxy)-4-(methoxymethyl)-beta-carboline-3-carboxylic acid ethyl ester (6-PBC) and the full agonist 6-(benzyloxy)-4-(methoxymethyl)-beta-carboline-3-carboxylic acid ethyl ester (Zk 93423) at wild type and recombinant GABAA receptors

A pharmacophore and an alignment rule have previously been reported for BzR agonist ligands. The design and synthesis of 6-(propyloxy)-4-(methoxymethyl)-beta-carboline-3-carboxylic acid ethyl ester (6-PBC, 24, IC50 = 8.1 nM) was based on this pharmacophore. When evaluated in vivo this ligand exhibited anticonvulsant/anxiolytic activity but was devoid of the muscle relaxant/ataxic effects of "classical" 1,4-benzodiazepines (i.e., diazepam). Significantly, 6-PBC 24 also reversed diazepam-induced muscle relaxation in mice. The 3-substituted analogues 40-46 and 48 of 6-PBC 24 and Zk 93423 27(IC50 = 1 nM) were synthesized and evaluated in vitro to determine what affect these modifications would have on the binding affinity at recombinant BzR subtypes. With the exception of the 3-amino ligands 40 and 41, all the beta-carbolines were found to exhibit high binding affinity at BzR sites. The 3-propyl ether derivative 45 was also evaluated in vivo and found to be devoid of any proconvulsant or anticonvulsant activity at doses up to 40 mg/kg. The 6-(1-naphthylmethyloxy) and 6-octyloxy analogues 25, 26, 28, and 29 of 6-PBC 24 were synthesized to further evaluate the proposed alignment of agonists vs inverse agonists in the pharmacophore of the BzR. In addition, ligands 26 and 29 were designed to probe the dimensions of lipophilic pocket L3 at the agonist site. The activity of 29 was evaluated in vivo; however, this analogue elicited no pharmacological effects at doses up to 80 mg/kg. These and other related beta-carbolines were also examined in five recombinant GABAA receptor subtypes. Ligands 52-61 all exhibited moderate to high affinity at GABAA receptors containing alpha1 subunits. These ligands will be useful in further defining the pharmacophore at alpha1 beta3 gamma2 receptors.     

Melting and Vaporization of the 1223 Phase in the System (Tl-Pb-Ba-Sr-Ca-Cu-O)

The melting and vaporization of the 1223 [(Tl,Pb):(Ba,Sr):Ca:Cu] oxide phase in the system (Tl-Pb-Ba-Sr-Ca-Cu-O) have been investigated using a combination of dynamic methods (differential thermal analysis, thermogravimetry, effusion) and post-quenching characterization techniques (powder x-ray diffraction, scanning electron microscopy, energy dispersive x-ray spectrometry). Vaporization rates, thermal events, and melt compositions were followed as a function of thallia loss from a 1223 stoichiometry. Melting and vaporization equilibria of the 1223 phase are complex, with as many as seven phases participating simultaneously. At a total pressure of 0.1 MPa the 1223 phase was found to melt completely at (980 ± 5) °C in oxygen, at a thallia partial pressure (p_Tl2O) of (4.6 ± 0.5) kPa, where the quoted uncertainties are standard uncertainties, i.e., 1 estimated standard deviation. The melting reaction involves five other solids and a liquid, nominally as follows: 1223→1212+(Ca,Sr)2CuO3+(Sr,Ca)CuO2+BaPbO3+(Ca,Sr)O+LiquidStoichiometries of the participating phases have been determined from microchemical analysis, and substantial elemental substitution on the 1212 and 1223 crystallographic sites is indicated. The 1223 phase occurs in equilibrium with liquids from its melting point down to at least 935 °C. The composition of the lowest melting liquid detected for the bulk compositions of this study has been measured using microchemical analysis. Applications to the processing of superconducting wires and tapes are discussed.     

“Those found responsible have been sacked”: some observations on the usefulness of error

Erik Hollnagel’s body of work in the past three decades has molded much of the current research approach to system safety, particularly notions of “error”. Hollnagel regards “error” as a dead-end and avoids using the term. This position is consistent with Rasmussen’s claim that there is no scientifically stable category of human performance that can be described as “error”. While this systems view is undoubtedly correct, “error” persists. Organizations, especially formal business, political, and regulatory structures, use “error” as if it were a stable category of human performance. They apply the term to performances associated with undesired outcomes, tabulate occurrences of “error”, and justify control and sanctions through “error”. Although a compelling argument can be made for Hollnagel’s view, it is clear that notions of “error” are socially and organizationally productive. The persistence of “error” in management and regulatory circles reflects its value as a means for social control.     

Search advertising placement strategy: Exploring the efficacy of the conventional wisdom

Search advertising is one of the most important forms of electronic commerce. While click-through rates are considered a key measure of search advertising effectiveness by search providers, brand attention can also be a valuable objective. Our paper reports on an experiment that investigated how search advertisement placement affected search users’ brand recall and recognition. The results showed that semantically associated search ads generated significantly higher levels of brand attention than contextually associated ones. Significant interaction effects were found among search ad position, keyword association, and search result quality. Implications for decision makers are discussed.