Computational Shelf-Life Dating: Complex Systems Approaches to Food Quality and Safety

Shelf-life is defined as the time that a product is acceptable and meets the consumers expectations regarding food quality. It is the result of the conjunction of all services in production, distribution, and consumption. Shelf-life dating is one of the most difficult tasks in food engineering. Market pressure has lead to the implementation of shelf-life by sensory analyses, which may not reflect the full quality spectra. Moreover, traditional methods for shelf-life dating and small-scale distribution chain tests cannot reproduce in a laboratory the real conditions of storage, distribution, and consumption on food quality. Today, food engineers are facing the challenges to monitor, diagnose, and control the quality and safety of food products. The advent of nanotechnology, multivariate sensors, information systems, and complex systems will revolutionize the way we manage, distribute, and consume foods. The informed consumer demands foods, under the legal standards, at low cost, high standards of nutritional, sensory, and health benefits. To accommodate the new paradigms, we herein present a critical review of shelf-life dating approaches with special emphasis in computational systems and future trends on complex systems methodologies applied to the prediction of food quality and safety.     

Nanostructured supported palladium catalysts—Non-oxidative methane coupling

The Pd on α-Al₂O₃ catalysts with Pd particles in the low nanometer range have been prepared by a sonochemical reduction and a colloidal method, respectively. The two catalysts differ in their particle size, the widths of their particle size distributions and the amount of carbon incorporation in the Pd lattice.The adsorptive properties of the Pd/Al₂O₃ samples are different as a result of the different preparation methods. The methane adsorption capacity of that sample with smaller particles is lower than that of the catalyst with larger particles and the energy of activation is nearly doubled. DRIFTS and TPD results of CO adsorption supported by transmission electron microscopy data indicate that the PdSON catalyst with smaller and more homogeneous particles than PdCOL is highly dispersed which influences the coupling-hydrogenolysis process.The catalytic activity evidenced the formation of different adspecies during methane coupling and chemisorption on both catalysts. During the hydrogenation the carbon adspecies formed mainly methane at low adsorption temperatures. The significant amount of adsorbed methane at 773 K is governed by the highly active coordination unsaturated sites at the surface.     

A comparative study of epoxy and polyurethane based coatings containing polyaniline-DBSA pigments for corrosion protection on mild steel

Organic coatings based on epoxy and polyurethane matrices containing polyaniline doped with dodecyl benzene sulfonic acid (Pani-DBSA) were prepared and applied over steel plates (SAE 1020). The plates were submitted to salt spray chamber for up to 30 days in order to evaluate the corrosion protection of these coatings. The properties of the coated plates were analyzed as a function of time by electrochemical impedance spectroscopy, open circuit potential, optical microscopy, and Raman spectroscopy. In general, results indicate a decrease in the electrical resistance, increase in capacitance and decrease in open circuit potential. Epoxy based coatings have improved performance when Pani-DBSA is used as pigment, whereas for the polyurethane coatings, Pani-DBSA seems to play an adverse effect. Raman spectroscopy indicates a possible chlorination of the epoxy matrix after 30 days exposure to salt spray chamber.     

Tailoring new bisphenol a ethoxylated shape memory polyurethanes

Shape memory polyurethanes (SMPUs) have generated great attention because of their unique properties. These properties are result of a particular molecular structure consisting of flexible molecular chains with low glass transition temperatures alternating with hard urethane segments. In this field, bisphenol A (BA) has been used for a long time as chain extender due to the good properties of the obtained SPMU materials. Nevertheless, the high toxicity of this compound has caused a high decrease on its use. For this reason, it has been selected a lower toxicity compound, bisphenol A ethoxylate (BAE). In this work, it is described a new SMPUs based on BAE and the influence of the hard segment on the thermo-mechanical properties and shape memory capacity. For that, both the proportion of the components and the diisocyanate employed (2,4-toluene diisocyanate (TDI), 4,4′-methylene bis(phenylisocyanate) (MDI) or a TDI/MDI mixture) have been modified. Then, depending on the molecular architecture achieved, the polyurethanes present different properties, which were studied by different techniques, such as thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and dynamic-mechanical thermal analysis (DMTA). It has been observed that glass transition temperature (T_g) increases as the hard phase content in the PU samples increases. In addition, T_g-MDI > T_g-MDI-TDI > T_g-TDI, so it is possible to control the T_g of the material, that is, shape memory transition temperature varying the diisocyanate. Finally, the shape memory capacity of the PUs was evaluated by thermo-mechanical analysis (TMA). All the synthesized PUs have shown good shape memory effect with fixation ratios up to 80% and recovery ratios close to 100%.     

Study of ITER equatorial port plug handling system and vacuum sealing interface

In the field of the ITER port plug engineering and integration task, CEA has contributed to define proposals concerning the port plugs vacuum sealing interface with the vessel flange and the equatorial plug handling.The 2001 baseline vacuum flange sealing consisted of TIG welding of a 316L strip plate on to U shapes. This arrangement presented some issues like welding access, implementation of tools, lip consumption, complex local leak test, continuous leak checking. Therefore, an alternate sealing solution based on the use of metallic gaskets is proposed. The different technical aspects are discussed to explain how this design can simplify the maintenance and deal with safety and vacuum requirements.The design of the mechanical attachment and vacuum sealing of the plug has constantly evolved, but the associated remote handling equipment was not systematically reviewed. An update of the cask and maintenance procedure was studied in order to design it in accordance with the last generic plug flange design. This includes a concept of a gripping system that uses the plug flange bolting area and, to help the remote handling process, a cantilever assisting system is suggested to increase the reliability of the transfer operation between vacuum vessel and cask.     

Spatial and Time Variability of Drought Based on SPI and RDI with Various Time Scales

The spatial and temporal variability of droughts were studied for the Northeast Algeria using SPI and RDI computed with monthly precipitation data from 123 rainfall stations and CFSR reanalysis monthly temperature data covering the period 1979–80 to 2013–14. The gridded temperature data was interpolated to all the locations having precipitation data, thus providing to compute SPI and RDI with the time scales of 3-, 6- and 12-month with the same observed rainfall data. Spatial and temporal patterns of droughts were obtained using Principal Component Analysis in S-Mode with Varimax rotation applied to both SPI and RDI. For all time scales of both indices, two principal components were retained identifying two sub-regions that are similar and coherent for all SPI and RDI time scales. Both components explained more than 70% and 74% of drought spatial variability of SPI and RDI, respectively. The identified sub-regions are similar and coherent for all SPI and RDI time scales. The Modified Mann-Kendall test was used to assess trends of the RPC scores, which have shown non-significant trends for decreasing drought occurrence and severity in both identified drought sub-regions and all time scales. Both indices have shown a coherent and similar behavior, however with RDI likely showing to identify more severe and moderate droughts in the southern and more arid sub-region which may be due to its ability to consider influences of global warming. Results for RDI are quite uniform relative to time scales and show smaller differences among the various climates when compared with SPI. Further assessments covering the NW and NE of Algeria using longer time series should be performed to better understand the behavior of both indices.     

Salivary Glands after Prolonged Aluminum Exposure: Proteomic Approach Underlying Biochemical and Morphological Impairments in Rats

Aluminum (Al) is one of the most abundant elements on Earth, and its high extraction rate and industrial use make human exposure very common. As Al may be a human toxicant, it is important to investigate the effects of Al exposure, mainly at low doses and for prolonged periods, by simulating human exposure. This work aimed to study the effects of low-dose exposure to chloride aluminum (AlCl₃) on the oxidative biochemistry, proteomic profile, and morphology of the major salivary glands. Wistar male rats were exposed to 8.3 mg/kg/day of AlCl₃ via intragastric gavage for 60 days. Then, the parotid and submandibular glands were subjected to biochemical assays, proteomic evaluation, and histological analysis. Al caused oxidative imbalance in both salivary glands. Dysregulation of protein expression, mainly of those related to cytoarchitecture, energy metabolism and glandular function, was detected in both salivary glands. Al also promoted histological alterations, such as acinar atrophy and an increase in parenchymal tissue. Prolonged exposure to Al, even at low doses, was able to modulate molecular alterations associated with morphological impairments in the salivary glands of rats. From this perspective, prolonged Al exposure may be a risk to exposed populations and their oral health.     

Physical examination of arteriovenous fistula: The influence of professional experience in the detection of complications

Vascular access is one of the leading causes of mobilization of financial resources in health systems for people with chronic kidney disease on hemodialysis. Physical examination of the arteriovenous fistula (AVF) has demonstrated its effectiveness in identifying complications. We decided to evaluate the influence of nurses' professional experience in the detection of complications of the AVF (venous stenosis and steal syndrome). The study took place in eight hemodialysis centers between May and September of 2011 in the north of Portugal. Sample was constituted by registered nurses. The nurses involved in the experiment were divided in two groups: those who had more than 5 years of experience and those who had less than 5 years of experience. Ninety‐two nurses participated in the study: 34 nurses had less than 5 years of professional experience and 58 had more than 5 years of professional experience. In the practices considered by nurses in the detection of venous stenosis, there were no differences observed between the groups (P > 0.05). In steal syndrome, there were no differences observed between the groups in the practices of the nurses in the detection of this complication of the AVF (P > 0.05). We concluded that professional experience does not influence the detection of venous stenosis and steal syndrome.     

Synthesis and structure of cage-like mesoporous silica using different precursors

In this work the synthesis of cubic, FDU-1 type, ordered mesoporous silica (OMS) was developed from two types of silicon source, tetraethyl orthosilicate (TEOS) and a less expensive compound, sodium silicate (Na₂Si₃O₇), in the presence of a new triblock copolymer template Vorasurf 504 (EO₃₈BO₄₆EO₃₈). For both silicon precursors the synthesis temperature was evaluated. For TEOS the effect of polymer dissolution in methanol and the acid solution (HCl and HBr) on the material structure was analyzed. For Na₂Si₃O₇ the influence of the polymer mass and the hydrothermal treatment time were the explored experimental parameters. The samples were examined by Small Angle X-ray Scattering (SAXS) and Nitrogen Sorption. For both precursors the decrease on the synthesis temperature from ambient, ?25 °C, to ?15 °C improved the ordered porous structure. For TEOS, the SAXS results showed that there is an optimum amount of hydrophobic methanol that contributed to dissolve the polymer but did not provoke structural disorder. The less electronegative Br^? ions, when compared to Cl^?, induced a more ordered porous structure, higher surface areas and larger lattice parameters. For Na₂Si₃O₇ the increase on the hydrothermal treatment time as well as the use of an optimized amount of polymer promoted a better ordered porous structure.