Influence of β‐nucleation on polymorphism and properties in random copolymers and terpolymers of propylene

The competition between α, β, and γ polymorphs has been studied in several random copolymers and terpolymers of propylene, by performing X‐ray diffraction and differential scanning calorimetry experiments. Formation of β‐crystals, achieved by the addition of a β‐nucleating agent, was found to be highly dependent on comonomer type and crystallization conditions. Additionally, the mechanical properties have been evaluated from stress‐strain, microhardness and dynamic‐mechanical thermal analyses. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Multifunctional TiO2 coatings for Cultural Heritage

Environmental pollution arising from industrial implants and urban factors is constantly increasing, causing aesthetical and durability concerns to urban structures exposed to the atmosphere.     

Anisotropic thermal conductivity of silicon nitride ceramics containing carbon nanostructures

Silicon nitride (Si₃N₄) composites containing carbon nanotubes (CNTs) or graphene nanoplateles (GNPs) are of great relevance in the electronic and aerospace industries where the search for new materials with enhanced and anisotropic thermal conductivity to work in harsh environments is a strategic guideline. Here we study thermal conduction in Si₃N₄ composites with different amounts of carbon nanostructures. The effects of the nanostructure orientation respect the heat flux, the testing temperature and the α/β Si₃N₄ phase ratio are analyzed. The addition of CNTs and GNPs leads to an anisotropic thermal response, decreasing the through-thickness thermal conductivity of the Si₃N₄ composites and raising the in-plane thermal conductivity, especially for GNPs that enhance it up to twice that of the monolithic Si₃N₄. This effect is related to the preferred orientation of the nanostructures that gives a less resistive network in the in-plane direction and the intrinsic anisotropy of their thermal conductivity.     

Dense bulk silicon oxycarbide glasses obtained by spark plasma sintering

Dense silicon oxycarbide glasses (SiOC) have been produced by spark plasma sintering (SPS) of SiOC powders. Raw powders were obtained by pyrolysis under nitrogen at 1100 °C of tetraethylorthosilcate/polydimethylsiloxane (TEOS/PDMS) hybrids. SPS experiments were carried out at 1300 and 1500 °C at 10 and 80 MPa and then were studied by chemical analysis, ²⁹Si and ¹³C MAS NMR, ATR, Raman, XRD, FE-SEM, density, porosity, microhardness (H_v) and thermal conductivity (K). The SiOC materials are formed by Si_xOC_4?x units within a silica matrix where silicon carbide and graphite nanodomains are also present. After the SPS treatment the silicon carbide crystallite size is close to 2.5 nm. At 1300 °C and 1500 °C the carbon nanodomain size is close to 3 nm and 2 nm, respectively. H_v values vary from 3.4 to 9.15 GPa, for 30% and 1% of porosity, respectively. Finally, K is always close to 1.38 W m^?1 K^?1.     

Preparation and magnetoelectric properties of NiFe2O4–PZT composites obtained in-situ by gel-combustion method

Magnetoelectric composites of xNiFe₂O₄–(1 ? x)Pb(Zr,Ti)O₃ with x = 2, 5, 10, 20, 30% were prepared by citrate–nitrate combustion using PZT-based template powders. In order to ensure a better connectivity of dissimilar phases, we have used chemical methods for preparation in situ composites, followed by adequate sintering procedure. The structural, microstructural and functional properties of di-phase magnetoelectric composites of NiFe₂O₄–PZT are reported. The XRD analysis is demonstrating the synthesis of pure ferrite phase directly on the ferroelectric templates. An excellent mixing was obtained in the composite powders, as proved by a detailed SEM analysis.The magnetic and dielectric behaviors of the ceramic composites vary with the ratio of the two phases. The dielectric behavior is greatly influenced by the magnetic phase. The magnetoelectric (ME) coefficient was measured as a function of applied DC magnetic field. The maximum ME coefficient (dE/dH) varies from 0.0011 mV/(cm Oe) to 0.5 mV/(cm Oe) with increasing of NF addition.     

Crystalline and magnetic properties of Er and Yb chromites modified by Mn and Ca cations

The structural and physical properties of some chromites–manganites solid solutions (RE,Ca)Cr_0.5Mn_0.5O₃, RE = Er, Yb, have been studied by X-ray diffraction and magnetic measurements. Powders were prepared by solid state reaction between the component oxides. Complete solid solutions were obtained, except for YbCr_0.5Mn_0.5O₃ in which traces of hexagonal YbMnO₃ remain through all the synthesis and sintering processes. Incorporation of Mn³⁺ cations does not alter the perovskite O-type structure of the chromites. Ca-containing solid solutions maintain the O-type structure.Magnetic measurements indicate an increase of the ferromagnetic behavior when Ca²⁺ is incorporated into the lattice, with an expected transformation of Mn³⁺ into Mn⁴⁺, and its associated ferromagnetic exchange interactions. Competition between ferromagnetic Mn³⁺–Mn⁴⁺, Mn³⁺–Cr³⁺ and antiferromagnetic Cr³⁺–Mn⁴⁺, Yb–TM interactions (TM: transition metal) leads to complex magnetic ordering in the ytterbium chromites, although double exchange Mn³⁺–Mn⁴⁺ interactions predominate and suppress the spin reversal expected for the pure YbCrO₃ material.     

Effects of ozonized water and heat treatment on the papaya fruit epidermis

This study examined the effects of O₃ and hot water treatments on the epidermis of Golden papaya fruit. Heat treatments were applied in a hot water brushing (HWB) system. Papayas were brushed under a pressurized hot water rinse stage at 45, 55 and 65 °C for 60 s. In the HWB treatment, 4 ppm ozone was applied to the papayas for 1 or 2 min. The results show that ozone applications did not affect the fruit's cuticular surface, while heat treatments allowed natural fissures on the fruit epidermis to recover. Several crystalloid forms were identified on the epidermis of the papayas after the heat treatments. The predominant crystalloid forms on papayas are tubular and there is a positive response to temperature; the higher the temperature, the larger and more frequent the tubular crystalloids.     

Active nano-CuPt3 electrocatalyst supported on graphene for enhancing reactions at the cathode in all-vanadium redox flow batteries

Graphene-supported monometallic (Pt) and bimetallic (CuPt₃) cubic nanocatalysts have been investigated as new positive electrode materials for improving the VO₂⁺/VO²⁺ redox process occurring in the vanadium redox flow batteries (VRB). High-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) have been employed to characterize the electrodes. The presence of the CuPt₃ nanocubes on graphene conferred higher electrocatalytic activity due to the much higher electroactive area compared to that obtained with the Pt nanoparticles. The electrochemical surface area of the nano-(CuPt₃)-decorated graphene electrode was 105% higher compared to non-decorated graphene, being then a promising alternative for improving the VRB.     

Microencapsulation of cashew apple (Anacardium occidentale,L.) juice using a new chitosan–commercial bovine whey protein isolate system in spray drying

The aim of this work was to obtain a new stable food product from cashew apple juice encapsulated by spray-drying technique using chitosan–whey protein isolate systems. The materials were evaluated according to their physicochemical stability during storage at different conditions and characterized with respect to their particle size distribution and structure. Encapsulated commercial and natural juices showed homogenous and unimodal particle size distribution with diameters ranging from 0.2 to 5.0 μm and from 0.2 to 40.0 μm, respectively. Both juices demonstrated higher physicochemical stability for vitamin C and color measurements than their respective non-encapsulated juices. X-ray diffractograms evidenced that the powder juices after the 140th day of storage were still in amorphous state. These results indicate that the new product was effective in protecting sensitive compounds present in the food matrix and it was also able to remain stable throughout the study period.     

Characterisation of the Dynamic Interactions between Complex N-Glycans and Human CD22

CD22 (Siglec-2) is a B-cell surface inhibitory protein capable of selectively recognising sialylated glycans, thus dampening autoimmune responses against self-antigens. Here we have characterised the dynamic recognition of complex-type N-glycans by human CD22 by means of orthogonal approaches including NMR spectroscopy, computational methods and biophysical assays. We provide new molecular insights into the binding mode of sialoglycans in complex with h-CD22, highlighting the role of the sialic acid galactose moieties in the recognition process, elucidating the conformational behaviour of complex-type N-glycans bound to Siglec-2 and dissecting the formation of CD22 homo-oligomers on the B-cell surface. Our results could enable the development of additional therapeutics capable of modulating the activity of h-CD22 in autoimmune diseases and malignancies derived from B-cells.