Ion‐exchange resins. II. Acrylamide crosslinked copolymers as precursors for some ion exchangers

Crosslinked copolymers of acrylamide (AA) and ethylacrylate and some ion exchangers derived from them containing either primary amine groups, obtained by the Hofmann degradation of the amide groups, or carboxylic groups, obtained by the alkaline hydrolysis of the ester groups, were studied. Divinylbenzene and N,N′‐methylenebisacrylamide were used as crosslinkers. The starting copolymers and the corresponding ion exchangers were characterized by IR spectroscopy, swelling behavior, and thermogravimetric analysis. The ion‐exchanger properties were correlated with the crosslinker nature and the chemical reactions performed on the AA copolymers. The average molecular weight between two crosslinks, determined from the swelling data in water, was compared with that calculated on the basis of the copolymerization stoichiometry only for the carboxylic cation exchangers. In this way, the preservation of the crosslink density after the hydrolysis was revealed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2701–2707, 2003     

Pervaporation of 50 wt % ethanol–water mixtures with poly(1‐trimethylsilyl‐1‐propyne) membranes at high temperatures

Poly(1‐trimethylsilyl‐1‐propyne) (PTMSP) membranes have been used to separate ethanol–water mixtures by pervaporation. This polyacetylene is known to present high affinity toward ethanol, showing high selectivity and ethanol permeation flux. The performance of this polymer in the separation of alcohol–water solutions has been evaluated over long periods (572 h) at a high temperature (75°C) to examine the deterioration of the transport properties in the separation of 50 wt % ethanol–water solutions. Although PTMSP membranes present good characteristics for the separation of gases and liquid mixtures, their organic selectivity decrease with the operating time because of the relaxation processes of the polymeric chains, which affect the free volume of the polymer, the deterioration being more evident for concentrated solutions. The effects of the operation temperature on the characteristic parameters of pervaporation have also been studied to establish how this variable affects the performance of PTMSP membranes. The selectivity increases slightly with the operation temperature, but the effect of the temperature on the separation factor decreases as membranes are degraded with the operation time. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2843–2848, 2007     

Network Externalities,Incumbent’s Competitive Advantage and the Degree of Openness of Software Start-Ups

This paper proposes a formal model that analyzes the degree of openness chosen by start-ups when entering the software industry. In line with the literature, we label as degree of openness the extent to which software start-ups mix open source (OS) and proprietary solutions in the portfolio of software products they offer. We relate the choice of the degree of openness to two key characteristics of the market segments in which software start-ups operate: the strength of the network externalities and the competitive advantage of the incumbent. Specifically, by modelling (price) competition between an incumbent and an entrant in two ways, i.e., the entrant is price-setter or price-taker, we derive the necessary condition(s) in terms of the strength of network externalities for observing the adoption of a business model that comprises the offering of both proprietary and OS solutions by the entrant (i.e., hybrid business model). Then, we highlight that, if a hybrid business model is the choice, the degree of openness chosen in equilibrium increases along with both the strength of the network externalities and the competitive advantage of the incumbent. This result holds indifferently whether the software start-up is modelled as a price-setter or a price-taker. An empirical test run on a sample of European start-ups in the software industry supports these theoretical predictions.     

Compatibility of polysaccharide/maleic copolymer blends. IV. Thermal behavior of hydroxypropyl cellulose‐containing blends

The compatibility of the hydroxypropyl cellulose (HPC) with maleic acid–vinyl acetate copolymer in the solid state was studied by thermogravimetry, thermo‐optical analysis, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and optical microscopy. It was established that physical interactions are prevalent in blends with a high content of HPC, whereas chemical interactions predominate in blends with a medium and low content of HPC. By increasing the temperature, the thermochemical reactions are favored. Thermal properties are dependent on the mixing ratio of the components. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2585–2597, 2003     

Processing of a Silicon-Carbide-Whisker-Reinforced Glass-Ceramic Composite by Microwave Heating

A calcium magnesium aluminosilicate-based glass that contained 10 wt% of silicon carbide whiskers (SiC _w ) as reinforcement was prepared by tape casting, followed by sintering either in a conventional furnace or in a microwave oven. The results were consistent with retardation of glass sintering through whisker bridging. The glass, by itself, was sintered to almost-full density at 750°C for 4 h by conventional furnace sintering; the best sintered composite, with an estimated density of ∼90%, was obtained at 800°C with a dwell time of 4 h. Sintering at a temperature of >800°C did not improve the densification but rather resulted in severe whisker oxidation. A reduced densification rate was observed for the samples that were sintered in nitrogen. By contrast, in the microwave oven, almost-full density for the glass and ∼95% of the theoretical density for the composite were obtainable at 850°C for 15 min, which represented a reduction of ∼10 h of the total processing time and a reduced SiC _w oxidation.     

Enzymatic degradation of thermoresponsive poly(N‐isopropylacrylamide) grafted to carboxymethylcellulose copolymers

The enzymatic degradation of poly(N‐isopropyl acrylamide) (PNIPAM) grafted to carboxymethylcellulose (CMC) copolymers with a cellulasic preparation (Trichoderma viride) was studied. The enzymatic activity of the cellulasic preparation against CMC and the grafted copolymers was determined by the Petterson–Porath method, while their reduced viscosity variation in the presence of the same preparation was also followed. It has been shown that the enzymatic degradation behavior depends on the copolymer composition and the reaction temperature. Reducing sugars analysis showed that the experimental values for the grafted copolymers were higher than the calculated ones. At 50°C, the enzymatic reaction is completed in about 20 min for the copolymers, whereas for CMC it takes more than 40 min. It can be concluded that their enzymatic degradation is facilitated by the presence of the PNIPAM grafts. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1383–1386, 2003     

Role of cognitive and functional performance in the interactions between elderly people with cognitive decline and an avatar on TV

The complexity of new information technologies (IT) may limit the access of elderly people to the information society, exacerbating what is known as “the digital divide,” as they appear to be too challenging for elderly citizens regardless of the integrity of their cognitive status. This study is an attempt to clarify how some cognitive functions (such as attention or verbal memory) may determine the interaction of cognitively impaired elderly people with technology. Twenty participants ranging from mild cognitive impairment to moderate Alzheimer’s disease were assessed by means of a neuropsychological and functional battery and were asked to follow simple commands from an avatar appearing on a TV by means of a remote control, such as asking the participant to confirm their presence or to respond Yes/No to a proposal to see a TV program. The number of correct answers and command repetitions required for the user to respond were registered. The results show that participants with a better cognitive and functional state in specific tests show a significantly better performance in the TV task. The derived conclusion is that neuropsychological assessment may be used as a useful complementary tool for assistive technology developers in the adaptation of IT to the elderly with different cognitive and functional profiles. Further studies with larger samples are required to determine to what extent cognitive functions can actually predict older users’ interaction with technology.     

Design recommendations for camera-based head-controlled interfaces that replace the mouse for motion-impaired users

This work focuses on camera-based systems that are designed for mouse replacement. Usually, these interfaces are based on computer vision techniques that capture the user’s face or head movements and are specifically designed for users with disabilities. The work identifies and reviews the key factors of these interfaces based on the lessons learnt by the authors’ experience and by a comprehensive analysis of the literature to describe the specific points to consider in their design. These factors are as follows: user features to track, initial user detection (calibration), position mapping, feedback, error recovery, event execution, profiles and ergonomics of the system. The work compiles the solutions offered by different systems to help new designers avoid problems already discussed by the others.     

Rigid polyurethane foams: A model of the foaming process

A model of the manufacture of rigid polyurethane foams by free rising is presented. The extent of cream and rise periods as well as the amount of blowing agent necessary to give the desired foam density are theoretically predicted. The rate of blowing agent evaporation is calculated from an experimental boiling temperature vs. composition curve. Experimental runs were carried out with a formulation consisting of a polymeric isocyanate, a polyether polyol based on sorbitol, a silicone-polyol block-copolymer as surfactant, dibutyltin dilaurate as catalyst, and trichlorofluoromethane as blowing agent. Mixing was performed in situ in the mold using a commercial foaming machine. Experimental results gave a satisfactory agreement with model predictions. A diagram containing all the relevant information may be theoretically built and used for the selection of adequate operating parameters for a given formulation.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.