Modeling of the electrostrictive, dielectric, and piezoelectric properties of ceramic PbTiO(3)

The upper and lower limits of the electrostrictive constants, dielectric permittivities, spontaneous polarizations, and piezoelectric coefficients were calculated for ceramic PbTiO(3) from theoretical single-crystal constants. Experimental ceramic data fall between these upper and lower limits. The large piezoelectric anisotropy d(33)/d(31) of ceramic PbTiO(3 ) was shown to be related to the single-crystal PbTiO(3) electrostrictive anisotropies Q(11)/Q(12 ) and Q(44)/Q(12). The possibility of a change in sign of the ceramic d(31) coefficient due to a slight variation in the single-crystal electrostrictive anisotropies was discussed. The single-crystal and predicted ceramic hydrostatic electrostrictive constants were found to be equal. Using this result the ceramic hydrostatic g(h ) coefficient is always smaller than the single-crystal g (h), but the ceramic hydrostatic d(h) coefficient can be either larger or smaller than the single-crystal d(h) depending on the dielectric anisotropy (epsilon (11)/epsilon(33)) of the single-crystal.     

Evidence for the Microwave Effect During the Annealing of Zinc Oxide

A microwave/conventional hybrid furnace has been used to anneal virtually fully dense zinc oxide ceramics under pure conventional and a microwave/conventional hybrid heating regime with a view to obtaining evidence for the "microwave effect" during the resulting grain growth. In each case it was ensured that each sample within a series had an identical thermal history in terms of its temperature/time profile. The results showed that grain growth was enhanced during hybrid heating compared with pure conventional heating; the greatest enhancement, a factor of ∼3 increase in average grain size, was observed in the range 1100°–1150°C. The grain growth exponent decreased from 3 during conventional heating to 1.4 during hybrid heating in this temperature range, suggesting an acceleration of the diffusional processes involved. Temperature gradients within the samples were found to be too small to explain the results. This suggests that clear evidence has been found to support the existence of a genuine "microwave effect."     

Structural–Property Relations in a Reduced and Internally Biased Oxide Wafer (RAINBOW) Actuator Material

Reduced and internally biased oxide wafer (RAINBOW) actuators are fabricated by a controlled reduction of Pb(Zr, Ti)O₃-based piezoelectric material. The reduction process results in a conductive layer composed of an interconnected metallic lead phase and refractory oxides (ZrTiO₄, ZrO₂, La₂O₃, etc.). The nature of the reduction is discovered to be the result of a complex volume change leading to a nanoscale interconnected metallic structure. The distribution of phases within the cermet vary within the thickness of the wafer. Within the piezoelectric ceramic phase, the reduction process modifies the grain-boundary structure to give two distinct types of fracture: transgranular and intergranular. The complexed microstructures of the RAINBOW actuator materials are discussed in relation to their dielectric and piezoelectric properties.     

Attraction of Male European Tarnished Plant Bug, <Emphasis Type="Italic">Lygus rugulipennis</Emphasis> to Components of the Female Sex Pheromone in the Field

Previous work showed that females of the European tarnished plant bug, Lygus rugulipennis Poppius (Heteroptera: Miridae), produced three chemicals, hexyl butyrate, (E)-2-hexenyl butyrate, and (E)-4-oxo-2-hexenal, and that these were suspected to be components of the female sex pheromone. In field experiments, traps baited with blends of these chemicals dispensed from polyethylene vials and sachets failed to catch significant numbers of males. Here, we report more recent field experiments in which the chemicals were released from glass microcapillary tubes. A blend of hexyl butyrate and (E)-4-oxo-2-hexenal was significantly attractive to male L. rugulipennis. In addition, whereas the mixture of all three components attracted fewer L. rugulipennis males, this tertiary blend captured significantly greater numbers of males of the congeneric species Lygus pratensis than the binary mixture. The possible reasons for the success of the microcapillaries compared with other dispensers are discussed.     

A vapor collection and thermal desorption method to measure semiochemical release rates from controlled release formulations

Chemicals (bp 270–490 °C/1 atm) evaporated from a controlled-release formulation dispenser were carried by an airflow to a collector packed with a polymeric adsorbent. After a set time, the chemicals were recovered by thermally desorbing them onto a gas-liquid chromatograpic column. They were then separated and quantified. The apparatus is described, and the requirements for its successful use are discussed. The soundness of the thermal desorption technique was confirmed by comparison with another technique: solvent elution from the collector. The advantages of the former technique are discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement of that product by the USDA.     

Apparatus and procedure for measuring release rates from formulations of lepidopteran semiochemicals

An apparatus was developed wherein a vacuum source was used to pull air across a controlled-release-formulation dispenser or a planchet containing a known quantity of a semiochemical and into a collector filled with a polymeric adsorbent. After a set time, the semiochemical was eluted with solvent and was quantified by gas-liquid chromatography (GLC). High percentages of known quantities of the lepidopteran semiochemicals (Z)-7-dodecen-l -ol acetate (Z7DDA), boiling point (bp) 275 ° C/1 atm, (Z)-9-tetradecen-1-ol formate (Z9TDF), bp 289 °C/1 atm, and (Z,Z)-3,13-octadecadien-1-ol acetate (ZZODDA), bp 490 °C/1 atm, were recovered. The semiochemicals did not oxidize and were recovered quantitatively from the adsorbent. The release rates of Z9TDF from a controlled-release dispenser were found to be directly proportional to the airflow rates. Release rate measurements on the Z9TDF dispensers were made for the purpose of estimating the method's precision. The method was shown to give internally consistent results by measurements on another Z9TDF formulation. The accuracy of the method is discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement by the USDA.     

Barium Metaplumbate Ceramic Electrodes for Ceramic Capacitors

A novel approach to reduce electrode costs in ceramic capacitors is presented. Barium metaplumbate (BaPbO₃) was fired onto sintered commercial (Ba, Sr)TiO₃ disk capacitors as external electrodes. Samples were compared to disk capacitors of the same composition with electrodes made of sputtered gold and air-dried silver. The ceramic electrode led to substantial changes in the insulation resistance and dc breakdown strengths, but other properties remained the same. The feasibility of using BaPbO₃ electrodes strongly depends on chemical reactions between the electrode and dielectric.     

Model-based and Fuzzy Logic Approaches to Condition Monitoring of Operational Wind Turbines

 It is common for wind turbines to be installed in remote locations on land or offshore, leading to difficulties in routine inspection and maintenance. Further, wind turbines in these locations are often subject to harsh operating conditions. These challenges mean there is a requirement for a high degree of maintenance. The data generated by monitoring systems can be used to obtain models of wind turbines operating under different conditions, and hence predict output signals based on known inputs. A model-based condition monitoring system can be implemented by comparing output data obtained from operational turbines with those predicted by the models, so as to detect changes that could be due to the presence of faults. This paper discusses several techniques for model-based condition monitoring systems: linear models, artificial neural networks, and state dependent parameter "pseudo" transfer functions. The models are identified using supervisory control and data acquisition (SCADA) data acquired from an operational wind firm. It is found that the multiple-input single-output state dependent parameter method outperforms both multivariate linear and artificial neural network-based approaches. Subsequently, state dependent parameter models are used to develop adaptive thresholds for critical output signals. In order to provide an early warning of a developing fault, it is necessary to interpret the amount by which the threshold is exceeded, together with the period of time over which this occurs. In this regard, a fuzzy logic-based inference system is proposed and demonstrated to be practically feasible.     

Molecular structures and conformational studies of triarylcyclopropyl and related nonsteroidal antiestrogens

Molecular structures and conformational characteristics of a series of 1,1-dichloro-2,2,3-triarylcyclopropanes (DTACs), which were reported previously to be distinctly antiestrogenic and inhibitors of the estrogen-receptor-positive MCF-7 human breast cancer cells in culture, are reported. In addition, structural and conformational features of the DTACs were compared to the first-known nonsteroidal antiestrogen, MER25, and the clinically useful antiestrogen Tamoxifen. The molecular structures of four DTAC compounds were determined by X-ray diffraction. Crystallographic structures show that the DTAC molecules have nearly the same relative conformation for the three aryl rings which is designated as a "nonpropeller" conformation in contrast to the observed "propeller" conformation for the three rings in all known triarylethylenes. Systematic conformational searches were performed to find the conformational preferences of DTACs, MER25, and Tamoxifen using idealized model compounds built from their respective crystal structure. Energy-minimization and conformational-search studies demonstrated that all DTAC molecules have a common, single global minimum energy conformer for their central core containing the dichlorotriarylcyclopropyl system, which is similar to that found in their crystal structures. Conformational search of MER25 showed that the molecule can assume a number of low-energy conformers of which two, one anti (A1) and one gauche (G1A), have about the same energy. The anti conformation is similar to the one observed in its crystal structure and resembles the estrogenic E-isomer of Tamoxifen, while the lowest energy gauche conformer of MER25 resembles more closely the antiestrogenic Z-isomer of Tamoxifen. NMR spectroscopic analysis of MER25 showed that the molecule exists predominantly in the anti conformation in solution. A comparative review of the structural features and bioactivities of Tamoxifen, DTACs, and MER25 provides a possible explanation for their low estrogen receptor binding affinity which is common to these compounds together with their antiestrogenic activity.     

The necessity of conducting to the end the activities of vector control in the onchocerciasis control program in west Africa: recall of the stakes and proposal of a minimum budget for the period 1998-2002

After a brief presentation of the Onchocerciasis Control Programme in West Africa (OCP), the authors realize the health and socioeconomic consequences that could follow a cessation of larvicide treatment before 2002 in the south-eastern and western extensions of the Programme. Taking into account that OCP activities are theoretically supported until 1997, but aware of financial constraints that will probably increase from now to 2002, this paper proposes an a minima estimation of the residual vector control activities for a "phasing out" spread out for five years (1998-2002). These estimations essentially concern the larvicide coverage, the insecticides used, the entomological surveillance, the logistical support and their financial aspects. As far as 48 U.S. $ million amount for 5 years are concerned, the budget allocated for vector control activities should not exceed the third of the global amount allocated to OCP for the actual fourth financial phase of the Programme (1992-1997).