Investigation and simulation of foam aluminum obtained from secondary aluminum raw materials by mechanical doping

The structure and phase composition of the samples of foam aluminum based on the AMg6 alloy (Al-6%Mg-0.7%Mn) obtained in a high-energy planetary mill are investigated. Mechanical doping provides high dispersity and homogeneity of all structural components including particles of the foam agent TiH₂, which allows one to obtain foam aluminum with a pore size of 1–5 mm at a density of 1.20–0.80 g/cm³. Mechanical properties of foam aluminum were estimated based on the results of compression tests. Based on preliminary investigations, an imitation model of foam formation is suggested that well describes the process of foam formation.     

Fast algorithms for single frequency estimation

In this paper, some new estimators of the frequency of a single complex sinusoid are presented. The rotate-add-decimate (RAD) method of Crozier is first refined to more closely approach the Cramer-Rao Bound (CRB). An additional modification yields an unbiased estimator (ERAD) that essentially achieves the CRB above a signal-to-noise ratio (SNR) threshold comparable to that of RAD. In addition, this estimator is proven to achieve the CRB for high SNR. The ERAD method requires approximately 2N complex multiply-adds and log/sub 2/N arctangents. A modified ERAD (MERAD) is proposed that matches the SNR threshold and computational complexity of the RAD method (approximately 3N complex multiply-adds and log/sub 2/N arctangents) but achieves the CRB for high SNR.     

Influence of washing and of heat-treatment conditions on the thermal stability of VPI-5

Thorough washing of a VPI-5 synthesized with n-dipropylamine as template improves greatly its thermal stability while no major change is observed in the template content. A detailed study of the influence of the pretreatment conditions shows that in order to obtain a high thermal stability (up to at least 960 °C) two parameters are of importance. The removal of both the template and the adsorbed water requires either a low heating rate at atmospheric pressure or a low pressure (less than 3 Torr) when the heating rate is 300 ° per hour.     

Low-threshold single-quantum-well InGaAs/GaAs lasers grown bymetal-organic chemical vapor deposition on structure substrates

Low-threshold current (as low as 3.0 mA) and high-external efficiency (≈88%) InGaAs/GaAs lasers emitting at 1 μm under a stable fundamental transverse mode were obtained by using the temperature engineered growth technique for the growth on prepatterned substrates     

Currents induced on multiconductor transmission lines by radiationand injection

Multiconductor transmission line theory is used to compare current induced on individual wires within a bundle by injection and radiated excitation. Calculations show that the two types of excitation generally induce significantly different current distributions, but the differences are much smaller for electrically short lines. The results are relevant to the validity of using current injection testing to replace radiated immunity testing