Reliability of corrosion-damaged steel structures using interval probability theory

Engineering decisions concerning the performance of existing structures must be made in the presence of uncertainties. The remaining capacity of corroded steel structures provides a good example of different aspects of uncertainty. These include: an unknown or partially known extent of damage; a variability in loading and an uncertain reserve of structural capacity depending on the mode of failure. The theory of structural reliability has been developed to provide a method of analysis for structural safety. In this paper, methods are proposed to compute the component reliability of corrosion-damaged steel members. The application of a recently developed theory called interval probability theory for system reliability is illustrated using the data obtained from actual samples of corroded beams.     

Gravity driven counterflow through an open door in a sealed room

Flow measurements using tracer gas techniques were made on the exterior doorway of a test house for indoor-outdoor temperature differences of 0.5–45 K. The time for door opening and closing was constant at 3.75 s, and fully open hold time varied from 0.5 s to 120 s. Predictions of a variable density steady flow model were in good agreement with the measurements when adjustments were made for the time-varying size of the opening and for the effect of cross-stream mixing between the incoming and outgoing air streams. The flow rate is shown to be governed by an effective density very close to the average of inflow and outflow densities, and the control condition at the doorway is fixed by the jet-like behavior of the inflow stream. Dependence of cross-stream mixing on interfacial stability caused the orifice and coefficient to increase from 0.4 to 0.6 as temperature difference increased. This varying orifice coefficient is well represented by the combination of a discharge coefficient for streamline contraction combined with a mixing coefficient which accounts for mixing between the inflow and outflow.     

Stress-Strain State of Weak Saturated Clay Beds of Embankments

Results are presented for laboratory and field tests of weak saturated soils serving as beds for embankments in Ho Chi Min City and various regions of the Mekong River Delta (Vietnam). A method is outlined for quantitative evaluation of the stress-strain state (SSS) of the weak saturated clayey beds (plane problem). A method is described for quantitative evaluation of the deformation and stability of weak beds in the initial, intermediate, and stabilized stages of the formation and transformation of the SSS. __________ Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 5, pp. 2–6, September–October, 2005.     

Lead contamination in tap water of households with children in Lower Saxony, Germany

Lead has numerous acute and chronic adverse effects on human beings. This is especially true for infants and children. The main path of lead ingestion in children can be different according to housing and living situation. The intake of lead through drinking water is commonly due to metal corrosion. The users plumbing can be an important factor. In recent years, many lead pipes in Germany have been replaced by pipes made of an alternative material. The aim of this study is to assess the present state of drinking water contamination and the resulting exposure of infants to lead. For this purpose mothers of new-born babies were offered a free examination of their drinking water. After a written declaration of consent had been obtained and after the infant in question had reached an age of 3 months, a stagnation sample of cold tap-water after overnight stagnation together with a random daytime sample was obtained from the family. The collected samples were analysed by atomic absorption spectrometry for their lead concentration. In total, 1485 samples from households were collected. Of the 1434 stagnation samples, 3.1% had lead concentrations greater than 0.01 mg/l (recommended limit of the WHO) and 0.6% had concentrations above the limit of the German drinking water regulation (0.04 mg/l). The values for the 1474 random daytime samples were 2.1% above 0.01 mg/l and 0.2% greater than 0.04 mg/l, respectively. By region, the areas Bovenden, Friedland, Duderstadt, Northeim and Rosdorf were particularly affected. The highest measured concentrations of lead in the stagnation samples were 0.11 mg/l and 0.15 mg/l in the random daytime samples, respectively.     

Energy and environmental comparison of three variants of a family house during its whole life span

The aim of this study is to analyse and compare three variants of a family house in order to evaluate the total environmental impacts produced during the whole building life cycle. The first variant corresponds to the standard in force in Switzerland, the second alternative to the requirements of a quality control label for houses with low energy consumption and the third case is a very low energy consumption building. The three variants have the same architectural aspect but different insulation thicknesses and types, different energy production systems and the use of different renewable energies. The calculation of the environmental impacts is carried out by means of a life cycle analysis, which includes not only the impact related to the energy consumption during the occupancy stage, but also the materials manufacture, transport, replacement and elimination at the end of the building lifetime. The results are expressed with the Swiss and the UCTE (Union for the Co-ordination of Transmission of Electricity) electricity mix to analyse how they influence the building impact.     

A study of the effect of stiffness distribution on nonlinear seismic response of multi-degree-of-freedom structures

The ductility requirement of elastoplastic multi-d.o.f. shear structures is studied by analysing the response obtained through step-by-step integration of the equations of motion for some recorded accelerograms. In view of the high dependence of the structural strength reserve beyond the elastic range on the distribution of plastic deformations in the structure, this paper aims to establish the influence of the stiffness distribution and of the earthquake features on the local ductility demand. Attention is also paid to the analysis of the influence of variation in excitation intensity and duration on the seismic behaviour of the structural models considered. Numerical results show that overall structural ductility alone is not sufficiently representative to evaluate the ultimate state of multi-d.o.f. structures. Local ductility must also be specified in order to create a reliable aseismic design. In this context, the important role played by the distribution of stiffness over the structure is emphasized.     

Interaction of bacteriophage R17 and reovirus type III with the clay mineral allophane

A study has been made of the adsorption of bacteriophage R17 and reovirus type 3 by the amorphous aluminosilicate clay mineral allophane. In agreement with previous studies of virus adsorption to other minerals such as montmorillonite and aluminium hydroxide, the principal factors influencing adsorption were found to be mixing time, pH and the concentrations and isoelectric points of both the virus and the absorbent. However, allophane was found to be a much better adsorbent for reovirus and R17 over the pH range 5–7, the natural pH range of many fresh waters.By using highly purified radioactive reovirus it was possible to follow both the distribution of radioactive virus in a clay suspension and the specific infectivity of the virus. This study revealed that when adsorbed virus was eluted by neutral phosphate solutions it retained its physical integrity but was of a lower specific infectivity.     

Air monitoring network program in Saudi Arabia

The Kingdom of Saudi Arabia has initiated a program to install air quality network stations throughout the country in order to measure concentration of the ambient air pollutants. The site selection of these stations is an important objective to be accomplished and must be done based on scientific and rational work. To accomplish this objective, a modified version of atmospheric transport and dispersion model, known as air resources laboratories - atmospheric transport and dispersion (ARLATAD) model, is used to evaluate long range transport and diffusion of air pollutants from major pollution causing sources such as refineries, open-air burning of associated gases of oil fields and major industries.Hourly meteorological data for a period of three years (from 1977 to 1979) on wind speed, wind direction, pressure, and temperature from 20 synoptic stations in Saudi Arabia is processed and used as model input. In addition to these, meteorological data from three upper air stations is also processed in order to determine base and top of critical inversion heights.Various pollution causing sources are identified within the study area. Air trajectories are drawn with sources as the origins of the trajectories and the dispersion characteristics is studied with distance and time. Based on long term meteorological records, the adversely affected zones are statistically identified for potential station sites.     

Chloroaromatic formation in incineration processes

The high-temperature reactions of chlorinated hydrocarbons are reviewed with a primary focus on the gas-phase molecular growth chemistry and elementary reaction mechanisms leading to the formation of chlorinated benzenes and chlorinated polycyclic aromatic hydrocarbons. Recent heterogeneous mechanistic studies of the chlorination and condensation of aliphatic hydrocarbons at lower temperatures are also summarized. Copper(II) valent species play an important role as catalyst and reagent. The main thermal pathways for chlorinated dibenzodioxins and furans have been deduced by these laboratory experiments, which try to model the complex reality of the post-incineration zone of municipal and hazardous waste incinerators.