废塑料裂化生产汽柴油工业化装置研究

报道了废塑料炼油工艺中连续法、间歇法、半连续法等各种方法的特点 ;重点对各工业化流程中存在的问题和解决的方法进行了讨论 ,并提出了一些合理化的建议。     

An annular slot antenna on a dielectric half-space

The radiation properties of both singly and multiply fed annular slot antennas on a dielectric/air interface have been analyzed using Galerkin's method applied in the Hankel transform domain. The validity of our method has been confirmed through comparison with both theoretical and experimental results. The magic slot configuration has also been studied. The polarization diversity of this radiator makes it suitable for implementing a quasioptical balanced mixer     

An approximate method for computing performance-related reliability of gracefully degrading systems

Using existing methods, the computation of performance-related reliability (PRR) of large-scale gracefully degrading systems is very tedious and time consuming. In this paper, the behaviour of such systems is respectively modeled as two types of diffusion processes according to their reconfiguration coverage. If the coverage is 1 (i.e. the reconfiguration is always successful), it is modeled as a regular diffusion. If, on the other hand, the coverage is less than one, it is modeled as diffusion with killing. Kolmogorov backward equations for regular diffusion processes and for diffusions with killing are then applied to compute the PRR. The methods have been applied in several examples, and the results satisfactorily agree with the accurate results.     

补偿元件对载体催化元件输出特性的影响

阐述了矿井瓦斯传感器－载体催化元件在应用中，补偿元件发挥的作用和工作原理，着重分析了补偿元件对载体催化元件输出特性的影响，探讨了提高线性补偿效果的方法。     

蚕庄金矿倾斜采场的地压研究

本文使用工程地质、室内试验及数值分析的方法对蚕庄金矿的倾斜矿房的地压活动规律进行了研究，得出了一些有价值的结论。     

基于扇形霍尔板几何修正因子的分裂漏磁敏场效应晶体管相对灵敏度研究

采用保角变换方法推导出扇形霍尔板的几何修正因子,并根据几何修正因子得到扇形分裂漏场效应晶体管相对灵敏度的解析表达式.通过计算机模拟和实验测试结果的验证,进一步完善了扇形磁敏分裂漏场效应管相对灵敏度的数学模型.相比矩形结构磁敏场效应晶体管,扇形磁敏场效应晶体管具有更高的相对灵敏度.测试所获最大灵敏度为3.77%T-1,根据本文模型,最大相对灵敏度应为3.81%T-1.     

冷41-平14"L"型水平井轨迹优化与控制技术

冷41-平14井受地面条件的限制,靶前位移小,为保证中间套管和完井管柱的顺利下入,剖面设计为“反向造斜-稳斜-降斜-正向造斜-水平段”的“L”型。简要介绍了冷41-平14“L”型水平井的设计概况,详细介绍了该井井眼轨道优化设计原则和设计结果,以及实钻井眼轨迹连续控制技术。该井精确命中A、B靶,两靶处的井斜角、方位角和垂深等达到了设计要求,在A靶实现了软着陆。该井井眼轨道优化设计和井眼轨迹控制技术为类似水平井的井眼轨道设计和轨迹控制提供了有益的借鉴。     

钢管机械扩径工艺研究

介绍了大口径直缝焊管机械扩径的优点，原理及扩径力的计算，找出影响扩径力及扩径头寿命的因素。     

基于PRO/E三维管道轨迹专用检具的设计

介绍使用该软件组件设计模块中的高级工具———切除 (CutOut)功能设计高精度三维轨迹管道零件检具的方法 ,该方法具有高效和精密等特点。