Resource management in the next-generation DS-CDMA cellular networks

Direct sequence code-division multiple access has been shown as the predominant access technology to provide high-speed multimedia services in next-generation wireless cellular networks. The DS-CDMA cellular network significantly differentiates itself from the traditional narrowband TDMA/FDMA system, in which great capacity gain can be explored by taking advantage of its unique characteristics. This article addresses resource management in DS-CDMA cellular networks. We first provide an overview of the DS-CDMA network and discuss the main challenges in the design of resource management schemes. We then examine several critical issues within the scope of resource management, including congestion control, rate and power control, and cell planning, with the emphasis on call admission control. Finally, we offer some insights and discussions on the performance aspects, strengths, and weaknesses of existing proposals.     

In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry     

利用C++Builder 5.0开发原理框图绘图软件

介绍了原理框图各种图形的数据存储方法，利用C^ Builder5.0开发了原理框图的绘图软件，实现了原理框图绘制的基本功能。     

建(构)筑物机械拆除方法综述

介绍了几种常用的建(构)筑物机械拆除方法,对其工作原理、特点、应用条件及局限性加以分析和说明。     

基于拓扑法的多关节机械手无碰路径规划

本文提出了一种基于拓扑法的多关节机械手无碰路径规划方法,文中重点讨论了三关节机械手路径规划时如何划分状态空间、判别各连通块之间的连通性以及路径搜索等问题,最后我们给出了一个实验结果以示该方法的有效性。     

0.5级电子式电能表的设计与实现

本文论述了一种普及型电子式电能表的设计原理和实现方法，具体讨论了时分割乘法器和电流互感器的组成和误差分析，最后给出测试结果。     

Sensitivity analysis of free torsional vibration frequencies of thin-walled i-beam resting on elastic foundation

The sensitivity analysis of natural frequencies of torsional vibration of thin-walled I-beams resting on a Winkler-type elastic foundation and subjected to axial static loads is discussed. The first-order variation of the frequencies due to the design variable variations is derived. The cross- ection dimensions, the beam material constants and the foundation stiffness are assumed to be the design variables. The considerations are based on the theory of thin-walled beams with nondeformable cross-section. The underintegral sensitivity coefficients of the flange width and the foundation stiffness variations for a simply supported I-beam are determined. An accuracy of approximation of the natural frequencies changes due to the design variable change, by means of their first-order variations, is also investigated.     

Si衬底上横向外延GaN材料的微结构和光学性质的研究

用氢化物气相外延 (HVPE)方法在Si(III)衬底上成功横向外延生长出晶体质量较好的GaN薄膜材料。透射电子显微镜 (TEM )的研究结果表明 ,横向外延区域GaN的位错密度明显减小。由于SiO2 掩膜腐蚀角的不同 (分别为 90°和 6 6°) ,导致了横向外延GaN材料一些独特的微观形貌。微区拉曼光谱由数百条拉曼散射曲线组成 ,每一条曲线有三个振动模 ,分别对应Si振动模式 (5 2 0cm- 1) ,E2 模式 (5 6 6cm- 1)和E1(LO)模式(732cm- 1)。在垂直条纹方向 ,峰位和峰宽没有明显的变化 ,而峰强约 5 μm会发生周期性变化     

塔河油田特殊钻井条件下的录井技术

该文阐述了定向井、水平井和欠平衡钻井技术对传统录井方法的影响:钻时偏大、失真,岩屑细、代表性差,荧光常达12级、无意义,全烃值一般在5%以上,难以有效划分油气层;指出在特殊钻井条件下掌握设计指导思想,卡准重要层位是录井工作的关键,重点要参考组分分析数据、定量荧光分析数据和综合录井其它信息才能准确识别油气层。