硅烷交联超高分子量聚乙烯

采用硅烷对超高分子量聚乙烯(UHMWPE)进行交联改性，系统地研究了交联UHMWPE的凝胶率、熔点、结晶度、力学性能与耐磨性。结果表明，硅烷偶联剂导致了UHMWPE的交联，使UHMWPE的凝胶率提高。当硅烷含量较低时，UHMWPE的熔点增高、结晶度增大；当硅烷含量较高时，UHMWPE的熔点、结晶度呈下降的趋势；硅烷交联导致了UHMWPE材料的模量和强度提高，磨耗率降低；当硅烷含量较高时，交联UHMWPE材料的力学性能和磨耗率均变差；当硅烷含量为0．2份～0．4份时，交联UHMWPE材料的综合性能最佳。     

Impedance boundary conditions in a hybrid FEM/MOM formulation

When numerically modeling structures with imperfect conductors or conductors coated with a dielectric material, impedance boundary conditions (IBCs) can substantially reduce the amount of computation required. This paper incorporates the IBC in the finite-element method (FEM) part of a FEM/method of moments (FEM/MoM) modeling code. Properties of the new formulation are investigated and the formulation is used to model three practical electromagnetic problems. Results are compared to either measured data or other numerical results. The effect of the IBC on the condition number of hybrid FEM/MoM matrices is also discussed.     

天康面粉公司制粉车间局部技改介绍

山东巨野国家粮食储备库天康面粉公司制粉车间始建于2000年,设计能力为处理小麦100t/d.主要设备有FMFQ10×2/6×2磨粉机8台,FS-FG6×24C高方筛3台,FQFD50×2×3清粉机2台,磨辊总接触长度12000 mm,平筛总筛理面积138.8 m2,单位磨辊接触长度12 mm/(100kg·d),单位平筛筛理面积0.14 m2/(100kg·d).麦间清理工艺(包括初清)为4筛2打2去石3磁选2着水,粉间工艺为488M1S2T4P3Br.     

小剂量辐照小鼠胸腺细胞膜流动性的变化

报道了以茈为荧光探针,探讨小剂量~(60)Co γ射线照射后小鼠胸腺细胞膜流动性的变化。结果表明,剂量在0.25-1.00Gy范围,胸腺细胞膜流动性降低与剂量之间呈明显线性关系。从0.50Gy起,辐照组荧光强度比值I_1/I_2与I_3/I_2与对照组的比较存有显著差异(P<0.05)。提示淋巴细胞膜流动性的变化可作为小剂量辐照早期效应的敏感指标。     

带有块间串扰MC-CDMA的时域信道估计和多用户检测

本文把带有IBI的MC-CDMA系统等效解释为特殊的直接序列码分多址（DS-CDMA）系统，并给出了相应的时域信道估计方法和时域线性最小均方误差（MMSE）多用户检测方法。仿真实验表明了本文方法的性能。     

把中国建设成世界有色金属制造业基地的对策研究

本文首先介绍了我国有色金属工业的现状以及当前世界有色金属工业发展的新格局,并分析了中国成为世界有色金属制造业基地的支撑条件,最后提出了关于建设具有特色的中国有色金属制造业基地的几点看法。     

台达变频器在纺织织带盘带机上的应用

盘带机是纺织织带成品分卷设备，需要使用到收放卷控制。本文基于台达变频器在盘带机上的应用案例，论述盘带机自动化系统设计调试过程以及遇到的问题分析。     

一个基于J2EE Web应用的框架设计与实现

J2EE(Java 2平台企业版)是当前建立和开发各种Web应用的主流平台,MVC(模型-视图-控制)体系结构是当今设计交互式应用的事实标准.文中结合MVC在J2EE Web中的应用,通过电子政务系统开发实践,提出了一个具体的实现方案,描述了应用系统设计,给出了表示层、控制层、代理层、业务逻辑层、数据访问层和数据存储层等层次的明确划分,阐述了各层的功能作用以及层与层之间的关系,并针对具体业务给出了实现的部分具体内容,为在J2EE环境下开发结构良好、易于维护、易于扩展的Web应用提供了可行方案.     

Studies of substrate specificities of lipases from different sources

Although lipases are widely applied in a wide variety of reactions, available information on the factors that are responsible for the substrate specificities of lipases from different sources is scarce. In this paper, nine lipase‐producing microorganism strains were isolated from oil‐containing samples. The properties of these enzymes, including pH optima, temperature optima, thermal stability, and pH stability, vary significantly with the different sources from which these lipases were isolated. The substrate specificities of the nine lipases, including fatty acid and positional specificities, were also studied. The fatty acid specificities of the nine lipases were observably different toward 15 substrates with different carbon chain lengths, different saturation degrees and different side chains. The lipases from S₃ Penicillium citrinum (PCL), MJ₁ Aspergillus niger (ANL), MJ₂ Aspergillus oryzae (AOL), YM Bacillus coughing (BCL), S₉ Geotrichum candidum (GCL), and S₁₁ Candida lypolytica (CLL) showed the strongest specificities to short‐chain esters, and the other lipases showed strong selectivity for medium‐ or long‐chain and branched esters. The positional specificities were examined by analyzing the hydrolytic products of triolein catalyzed by the nine lipases, using TLC. The lipases can be mainly classified into two groups by their specificities for the ester bond at position 2 of triglycerides; one group can selectively hydrolyze the ester bond at position 2 of the triglycerides, the other group cannot. All these nine lipases were divided into four groups by hierarchical clustering analysis on the basis of the results of fatty acid and positional specificities.     

Km高温抗蚀耐磨涂料在省煤器中的应用

锅炉省煤器磨损一直是困绕锅炉稳定运行的主要因素之一。本介绍了Km高温抗蚀耐磨涂料的性能、特点，以及在实际生产中的使用情况，通过实践充分肯定了Km高温抗蚀耐磨涂料的可行性、可靠性和经济性。