Creep and drying shrinkage of calcium silicate pastes IV. Effects of accelerated curing

The dependent deformations and evidence of structural changes were measured on pastes of C₃S containing CaCl₂, and on pastes of C₃S or a C₃S/C₂S blend cured at 65°C. It was concluded that the addition of CaCl₂ enhances the role of the “pore component” in controlling irreversible strains even when well-hydrated pastes are dried. The formation of ore stable CSH at 65°C can explain the reduction in time-dependent deformations observed for these pastes. Even though a change in pore size distribution occurs at 65°C, it is not considered to affect irreversible strains in well-hydrated pastes.     

Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

Cis-Unsaturated fatty acid products by hydrogenation with chromium hexacarbonyl

The use of Cr(CO)₆ was investigated to convert polyunsaturated fats intocis unsaturated products. With methyl sorbate, the same order of selectivity for the formation ofcis-3-hexenoate was demonstrated for Cr(CO)₆ as for the arene-Cr(CO)₃ complexes. With conjugated fatty esters, the stereoselectivity of Cr(CO)₆ toward thetrans, trans diene system was particularly high in acetone. However, this solvent was not suitable at elevated temperatures required to hydrogenatecis, trans- andcis, cis-conjugated dienes (175 C) and nonconjugated soybean oil (200 C). Reaction parameters were analyzed statistically to optimize hydrogenation of methyl sorbate and soybean oil. To achieve acceptable oxidative stability, it is necessary to reduce the linolenate constituent of soybean oil below 1–3%. When this is done commercially with conventional heterogenous catalysts, the hydrogenated products contain more than 15%trans unsaturation. By hydrogenating soybean oil with Cr(CO)₆ (200 C, 500 psi H₂, 1% catalyst in hexane solution), the product contains less than 3% each of linolenate andtrans unsaturation. Recycling of Cr(CO)₆ catalyst by sublimation was carried through three hydrogenations of soybean oil, but, about 10% of the chromium was lost in each cycle by decomposition. The hydrogenation mechanism of Cr(CO)₆ is compared with that of arene-Cr(CO)₃ complexes. Presented in part at Seventh Conference on Catalysis in Organic Syntheses, Chicago, Illinois, June 5–7, 1978.     

Liquid-phase stereoselective thymol hydrogenation over supported nickel catalysts

The stereoselective hydrogenation of thymol was studied in liquid phase over several nickel catalysts, modified by coimpregnation of inorganic compounds containing chlorine. The total activity of all catalysts studied was decreased and was on the same order of magnitude, indicating that chlorine even after reduction remains on the surface and is responsible for the poisoning effects. Such blocking of accessible sites results in similar reaction rates for the catalysts studied. Selectivity and stereoselectivity to menthols and menthones changed significantly. The modifiers could influence the rate of keto-enol transformations, which is thought to be the key selectivity and stereoselectivity governing step.     

Potentiostatic step experiments on pasted Pb-Sb and Pb-Sn-Ca electrodes

A range of cyclic electrochemical experiments have been carried out on electrodes of porous PbO₂ supported on a number of Pb-Sb and Pb-Sn-Ca alloys using micro-computer controlled potentiostatic stepping techniques. The results show that, in certain cases, the differences in electrochemical behaviour of the PbO₂ can be interpreted as being due to the effect of the support alloy.     

The anodic behaviour of zinc in KOH solution. V: Galvanostatic polarization with an interruption

Galvanostatic polarization experiments, in which the current flow is interrupted and re-established, show that the process of passivation is controlled by the transport of mass in the solution phase.Part IV: M. J. Brook and N. A. Hampson,Electrochim Acta 15 (1970) 1749.     

The differential capacitance of solid tantalum in some aqueous solutions

The differential capacitance of tantalum has been measured in a number of aqueous electrolyte solutions. The metal is generally covered with an oxide layer in solutions of simple inorganic anions and the electrode capacitance is 5–10 F cm^–2. In solutions of oxalate anions the electrode capacitance is much higher and corresponds to that expected for a clean metal in contact with an aqueous solution.     

Interactive image processing in research

The objective of the work described here was to build an interactive and multi-purpose image processing system and to use that system to solve practical problems. The system was built and it was demonstrated that it could be used to measure the size of gas bubbles in a gas---liquid reaction system. Photographs of gas bubbles were available from high-speed schlieren motion picture studies and image processing is a feasible way to make large numbers of measurements of bubble size quickly and accurately.