Win7控制面板三大功能应用技巧

每个市场客户的需求是不一样的,使用情况也有差异.Win7的推出也是褒贬不一.Win7系统是微软开发的操作系统,在桌面、主题、功能、安全上相对于上一代系统有着很大的改进.以功能的强大及全面、存储空间小、操作系统简单和新增功能的人性化而受到用户的喜爱,且智能性上来说,Win7比XP要好很多.但是通过调查研究地发现,很多的用户对于Win7系统的使用仅仅停留在了表面阶段,对于系统中很多新的、提高便捷性的功能了解不足.因此,笔者通过这篇文章来研究和探讨win7系统的控制面板中三大功能的应用技巧,让win7系统能更好的为用户服务.     

MACD与K线图技术在证券投机中的实证研究

利用MACD趋势指标与K线形态图进行相互验证技术,改进一般的基于MACD的证券买卖准则。实证结果表明,基于改进后的MACD买卖准则进行证券投机,几乎能使投机者捕捉到每一波段行情,从而获取较高收益。     

基于欧氏距离及向量内积的骨架提取算法

对骨架算法进行研究,提出一种骨架提取算法.通过对图像内部像素点进行距离变换得到其最近边界点的位置,将内部像素点到最近边界点的向量定义为边界向量,根据物体内部相邻边界向量的方向,计算每个像素点的内积值和其8邻域的最小内积值,得到的最小内积点,以确定的阈值从最小内积点中选取骨架种子点,再对骨架种子点进行处理,得到连通的骨架.试验证明这种算法能保证骨架具的完整性和连通性,正确反映物体的拓扑结构.     

基于动态优先级策略的多AGV无冲突路径规划

自动导引运输车(AGV)路径规划影响柔性制造车间的高效、平稳生产.分析了多AGV在车间执行运输任务时常见的冲突类型,提出了一种基于动态优先级策略的多AGV无冲突路径规划方法.该方法通过时间窗检测冲突类型,并将等待时间、行驶距离、任务紧急程度作为量化动态优先级的考虑因素,进而利用动态优先级作为等待、二次路径规划两种冲突消减方法的选择依据.案例研究表明,在已知各AGV可行路径时,运用所提方法不仅能够实现多AGV的无冲突路径规划,而且能够提升多AGV完成运输任务的整体效率.     

基于动态优先级策略的多AGV无冲突路径规划

自动导引运输车(AGV)路径规划影响柔性制造车间的高效、平稳生产.分析了多AGV在车间执行运输任务时常见的冲突类型,提出了一种基于动态优先级策略的多AGV无冲突路径规划方法.该方法通过时间窗检测冲突类型,并将等待时间、行驶距离、任务紧急程度作为量化动态优先级的考虑因素,进而利用动态优先级作为等待、二次路径规划两种冲突消减方法的选择依据.案例研究表明,在已知各AGV可行路径时,运用所提方法不仅能够实现多AGV的无冲突路径规划,而且能够提升多AGV完成运输任务的整体效率.     

Generic Adaptive Sliding Mode Control for a Quadrotor UAV System Subject to Severe Parametric Uncertainties and Fully Unknown External Disturbance

International Journal of Control, Automation and Systems - This paper aims to provide a generic robust controller that is able to manipulate all kinds of quadrotor unmanned aerial vehicle (UAV)...     

A novel ADRC‑based design for a kind of fexible aerocraft

The paper presents a novel control design, which is based on the idea of active disturbance rejection control (ADRC), for a kind of fexible aerocraft whose controlled variable cannot be measured directly. Since the original frame of ADRC cannot be directly applied, the paper puts forward a new extended state observer (ESO) and the corresponding ADRC law. In order to assign the poles of the closed-loop system to ideal positions such that the vibration can be quickly suppressed, an elastic damping term is added into feedback law. The advantages of the new ESO for efectively estimating both the rigid mode and elastic mode from the measurements are discussed. Moreover, the analysis on the stability, the relative stability and the steady state of the closed-loop system is given. Finally, the efectiveness and robustness of the proposed ADRC are verifed by simulations.     

Degradability and biocompatibility of bioglass/poly(amino acid) composites with different surface bioactivity as bone repair materials

Bioglass (BG) possesses excellent bioactivity and has been widely used in the manufacture of biomaterials. In this study, a composite with different surface bioactivity was fabricated via in situ melting polymerization by incorporating BG and poly(amino acid) (PAA) at a suitable ratio. The structure of the composite was characterized by Fourier transform infrared spectroscopy and XRD. The compressive strength of the BG/PAA composites was 139 MPa (BG:PAA = 30:70). The BG/PAA composites were degradable, and higher BG in composite showed higher weight loss after 4 weeks of incubation in simulated body fluid. In addition, the BG/PAA composite maintained adequate residual compressive strength during the degradation period. The SEM results showed the differences in surface bioactivities of the composites directly, and 30BG/PAA composite showed thicker apatite layer and higher Ca/p than 15BG/PAA. in vitro MG-63 cell culture experiments showed that the composite was noncytotoxic and thus allows cells to adhere, proliferate, and differentiate. This indicates that the composite has good biocompatibility. The implantations in the bone defects of rabbits for 4 and 12 weeks were studied. The composites had good biocompatibility and were capable of guiding new bone formation without causing any inflammation. The composite may be successfully used in the development of bone implants.     

A new high accuracy method for two-dimensional biharmonic equation with nonlinear third derivative terms: application to Navier–Stokes equations of motion

In this paper, we propose a new compact fourth-order accurate method for solving the two-dimensional fourth-order elliptic boundary value problem with third-order nonlinear derivative terms. We use only 9-point single computational cell in the scheme. The proposed method is then employed to solve Navier–Stokes equations of motion in terms of streamfunction–velocity formulation, and the lid-driven square cavity problem. We describe the derivation of the method in details and also discuss how our streamfunction–velocity formulation is able to handle boundary conditions in terms of normal derivatives. Numerical results show that the proposed method enables us to obtain oscillation-free high accuracy solution.     

介观模拟研究温度对DPPC磷脂双层膜结构的影响

生物膜作为生物体的一种基本组成单元,在各种生命活动中占据重要地位。生物膜的结构和功能的稳定性是其发挥一切生理功能的前提。本文以DPPC磷脂双分子层为生物膜模型,采用基于Martini力场的粗粒化模拟方法,考察了温度对DPPC磷脂双层膜结构、形态和功能的影响。结果表明,315 K为DPPC磷脂双层膜的相转变温度;温度升高,DPPC分子间隙增加,尾链发生折叠弯曲,引起脂均面积增大,厚度减小,流动性增加;DPPC双层膜中甘油酯基团组成的栅栏区为膜中分子排列最有序的区域,也是阻碍小分子透膜的主要屏障区。研究结果不仅有助于更好地阐释生物膜的结构形态和功能之间的关系,也有助于理解药物与膜的相互作用,指导临床用药。