Application of the Solvothermal Process in the Synthesis of High-performance Ag/γ-Al_2O_3 Catalysts

1 INTRODUCTION Since Cu-ZSM-5 was reported as an effective catalyst for the selective catalytic reduction (SCR) of NO by hydrocarbons in the presence of excess oxygen, the SCR of NOx has received much attention as a kind of potential technology for cleaning NOx in various oxygen-rich exhausts of diesel engine, lean burning gasoline engine and gas engine. Although a number of catalysts have been tested, to date, it still seems to be difficult to find a catalyst that is completely suit…     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

Simple method of determining plasma impedance of streamer discharge in atmospheric air

For atmospheric streamer discharges using a lightning impulse generator, we demonstrate a method of determining the plasma impedance in a streamer region by analyzing the periodic attenuated discharge waveforms having high-frequency components. When the streamer region in the plasma can be treated as an equivalent series circuit model including resistance and inductance elements, the regression waveforms obtained by reducing and smoothing the discharge waveforms are analyzed in the equivalent circuit. We found that the streamer resistance increased exponentially with time after the discharge, whereas the streamer inductance and series impedance were constant at 4.0 Ω for longer than the first period of the discharge waveforms. Moreover, the slope of the regression curve increases more rapidly for the positive streamer resistance than for the negative resistance. Finally, the absolute values of the streamer impedance versus time were 3.3-19 Ω and 3.5-9.0 Ω for positive and negative discharges, respectively.     

The Visual Computing of Projector‐Camera Systems

This article focuses on real‐time image correction techniques that enable projector‐camera systems to display images onto screens that are not optimized for projections, such as geometrically complex, coloured and textured surfaces. It reviews hardware‐accelerated methods like pixel‐precise geometric warping, radiometric compensation, multi‐focal projection and the correction of general light modulation effects. Online and offline calibration as well as invisible coding methods are explained. Novel attempts in super‐resolution, high‐dynamic range and high‐speed projection are discussed. These techniques open a variety of new applications for projection displays. Some of them will also be presented in this report.     

Fabrication of 5.8‐in. OTFT‐driven flexible color AMOLED display using dual protection scheme for organic semiconductor patterning

Abstract— A 5.8‐in. wide‐QQVGA flexible color active‐matrix organic light‐emitting‐diode (AMOLED) display consisting of organic thin‐film transistors (OTFTs) and phosphorescent OLEDs was fabricated on a plastic film. To reduce the operating voltage of the OTFTs, Ta₂O₅ with a high dielectric constant was employed as a gate insulator. Pentacene was used for the semiconductor layer of the OTFTs. This layer was patterned by photolithography and dry‐etched using a dual protection layer of poly p‐xylylene and SiO₂ film. Uniform transistor performance was achieved in the OTFT backplane with QQVGA pixels. The RGB emission layers of the pixels were formed by vacuum deposition of phosphorescent small molecules. The resulting display could clearly show color moving images even when it was bent and operated at a low driving voltage (below 15 V).     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

3He Melting Pressure Measurements in High Magnetic Fields

Experimental methods and preliminary results of high-precision measurements of the ³ He melting curve in high magnetic fields have been described. The purpose of this work is twofold. One is to establish a reliable millikelvin temperature scale in high fields (T 10 mK, B 15 T), The other is to investigate a high field region of the magnetic phase diagram of solid ³ He by measuring the melting pressure down to temperatures below 1 mK. Besides the two superfluid transitions, the phase transition temperatures between the spin ordered solid and the paramagnetic solid, T _HFP , were determined at B = 12 and 10 T with good accuracy, which is an extension of previous measurements up to 8 T. The present T _HFP (B) line can not be scaled to that at a higher density with a single Grüneisen parameter, indicating a variation of density dependencies of the multiple-spin exchange interactions.     

Relation between axial compressive strength of reinforcing fibres and fibre diameter

Attempts were made to estimate the fibre axial compressive strength of pitch-based graphitized and polyarylate fibres, and the relationship between the compressive strength and fibre diameter was investigated. The estimated compressive strength of fibres decreases with increasing temperature. This decrease in compressive strength may be accounted for by a decrease in the radial compressing force. There is a linear relationship between the estimated compressive strength and radial compressing force in a temperature range from room temperature to 80°C. The real compressive strength of the fibres, determined by extrapolating this straight line until the radial compressing force is zero, increases with decreasing fibre diameter, but remains almost unchanged at a diameter range smaller than 10 m. In order to obtain reinforcing fibres having a higher compressive strength, it will be necessary to prepare fibres having a diameter smaller than 10 m.