Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material

A molecularly imprinted polymer with immobilized Au nanoparticles (Au-MIP) is reported as a novel type of sensing material. The sensing mechanism is based upon the variable proximity of the Au nanoparticles immobilized in the imprinted polymer, which exhibits selective binding of a given analyte accompanied by swelling that causes a blue-shift in the plasmon absorption band of the immobilized Au nanoparticles. Using adrenaline as the model analyte, it was shown that molecular imprinting effectively enhanced the sensitivity and selectivity, and accordingly, Au-MIP selectively detects the analyte at 5 microM. The combination of molecular imprinting and the Au nanoparticle-based sensing system was shown to be a general strategy for constructing sensing materials in a tailor-made fashion due to wide applicability of the imprinting technique and the independence of the sensing mechanism from the analyte recognition system.     

Simple and comprehensive two-dimensional reversed-phase HPLC using monolithic silica columns

Simple and comprehensive two-dimensional (2D)-HPLC was studied in a reversed-phase mode using monolithic silica columns for second-dimension (2nd-D) separation. Every fraction from the first column, 15 cm long (4.6-mm i.d.), packed with fluoroalkylsilyl-bonded (FR) silica particles, was subjected to the separation in the 2nd-D using one or two octadecylsilylated (C(18)) monolithic silica columns (4.6-mm i.d., 3 cm). Monolithic silica columns in the 2nd-D were eluted at a flow rate of up to 10 mL/min with separation time of 30 s that meets the fractionation every 15-30 s at the first dimension (1st-D) operated at a flow rate of 0.4-0.8 mL/min. Three cases were studied. (1) In the simplest scheme of 2D-HPLC, effluent of the 1st-D was directly loaded into an injector loop of 2nd-D HPLC for 28 s, and 2 s was allowed for injection. (2) Two six-port valves each having a sample loop were used to hold the effluent of the 1st-D alternately for 30 s for one 2nd-D column to effect comprehensive 2D-HPLC without the loss of 1st-D effluent. (3) Two monolithic silica columns were used for 2nd-D by using a switching valve and two sets of 2nd-D chromatographs separating each fraction of the 1st-D effluent with the two 2nd-D columns alternately. In this case, two columns of the same stationary phase (C(18)) or different phases, C(18) and (pentabromobenzyloxy)propylsilyl-bonded (PBB), could be employed at the 2nd-D, although the latter needed two complementary runs. The systems produced peak capacity of approximately 1000 in approximately 60 min in cases 1 and 2 and in approximately 30 min in case 3. The three stationary phases, FR, C(18), and PBB, showed widely different selectivity from each other, making 2D separations possible. The simple and comprehensive 2D-HPLC utilizes the stability and high efficiency at high linear velocities of monolithic silica columns.     

Reconstruction of a high-resolution image on a compound-eye image-capturing system

The authors have proposed an architecture for a compact image-capturing system called TOMBO (thin observation module by bound optics), which uses compound-eye imaging for a compact hardware configuration [Appl. Opt. 40, 1806 (2001)]. The captured compound image is decomposed into a set of unit images, then the pixels in the unit images are processed with digital processing to retrieve the target image. A new method for high-resolution image reconstruction, called a pixel rearrange method, is proposed. The relation between the target object and the captured signals is estimated and utilized to rearrange the original pixel information. Experimental results show the effectiveness of the proposed method. In the experimental TOMBO system, the resolution obtained is four times higher than that of the unit image that did not undergo reconstruction processing.     

Occurrence,horizontal transfer and degeneration of VDE intein family in Saccharomycete yeasts

VDE is a homing endonuclease gene originally discovered as an intervening element in VMA1s of Saccharomyces cerevisiae. There have been two independent subfamilies of VDE, one from S. cerevisiae strain X2180-1A and the other from Saccharomyces sp. DH1-1A in the host VMA1 gene, and they share the identity of 96.3%. In order to search the occurrence, intra/interspecies transfer and molecular degeneration of VDE, complete sequences of VMA1 in 10 strains of S. cerevisiae, eight species of saccharomycete yeasts, Candida glabrata and Kluyveromyces lactis were determined. We found that six of 10 S. cerevisiae strains contain VDEs 99.7-100% identical to that of the strain X2180-1A, one has no VDE, whereas the other three harbour VDEs 100% identical to that of the strain DH1-1A. S. carlsbergensis has two VMA1s, one being 99.8% identical to that of the strain X2180-1A with VDE 100% identical to that of the strain DH1-1A and the other containing the same VMA1 in S. pastorianus with no VDE. This and other evidence indicates that intra/interspecies transmissions of VDEs have occurred among saccharomycete yeasts. Phylogenetic analyses of VMA1 and VDE suggest that the S. cerevisiae VDEs had branched earlier than other VDEs from an ancestral VDE and had invaded into the host loci as relatively late events. The two VDEs seemed to degenerate in individual host loci, retaining their splicing capacity intact. The degeneration of the endonuclease domains was distinct and, if compared, its apparent rate was much faster than that of the protein-splicing domains.     

Force estimation via physical properties of air cushion for the control of a human-cooperative robot: basic experiments

For the control of a human-cooperative robot (HCR) using a soft material, we aim to verify, in this study, the usefulness of force estimation via physical properties of an air cushion. First, the physical model of the air cushion was represented by an air cylinder with a piston, which is subject to constraint by nonlinear elasticity. Second, the elastic properties of the air cushion were examined under the assumption that it can be formulated by a function of pneumatic pressure. The force applied to the air cushion was next estimated on the basis of the physical model, and the HCR was successfully controlled according to the estimated force.     

Thermal and optical properties of epoxy/zirconia hybrid materials synthesized via in situ polymerization

Epoxy/zirconia hybrid materials were synthesized from a bisphenol-A type epoxy resin, zirconium-tetra-n-propoxide and acetic acid via in situ polymerization. Acetic acid was used to control the hydrolysis and condensation reaction of the zirconium-tetra-n-propoxide. As a result, the zirconia produced by the in situ polymerization was uniformly dispersed into the epoxy matrix on a nano scale or less, and the hybrid materials exhibited an excellent optical transparency. With the increasing zirconia contents, the storage modulus in the rubbery region increased and the peak area of tanδ in the glass transition temperature region decreased. These results indicate that their heat resistance of the hybrid materials could be improved by hybridization with zirconia. Furthermore, the refractive indices of the hybrid materials were significantly improved with the increasing zirconia contents.     

Suppression of interface degradation in InGaAsP inP buried heterostructure lasers

In InGaAsP/InP buried heterostructure (BH) lasers, the degradation of BH interface between first- and second-growth step layers can be suppressed by employing the melt back process just before the second-step layer growth. It is confirmed this burying process give more reliable BH lasers than the conventional burying process. From the viewpoint of BH interface degradation, lasers lasing at 1.5 μm, where the melt back process naturally occurs during BH formation, are found to be more reliable than those lasing at 1.3 μm.     

Influence of the methyl group on the dielectric constant of boron carbon nitride films containing it

LSI interconnect insulators made using low dielectric constant (low-k) materials are required for high performance devices with a small RC delay. We investigated a boron carbon nitride film containing the methyl group (Me–BCN) using tris-di-methyl-amino-boron (TMAB: B[N(CH₃)₂]₃) gas as a low-k material. In addition, we studied the influence of the methyl group on the dielectric constant (k-value) and the properties of the Me–BCN films. It was found that the k-value of the Me–BCN films decreases with increasing number of C–H bonds due to the methyl group (CH₃). The number of O–H bonds due to water incorporation is suppressed by increasing the number of C–H bonds. Consequently, we suggested that a lower k-value can be realized by the suppression of water invasion by a hydrophobic surface due to methyl bonds. Thus, the control of the methyl group is important to achieve a low-k material using Me–BCN films.     

Water wettability/non-wettability of polymer materials by molecular orbital studies

The water wettability and non-wettability onto various kinds of polymers, which have so far been macroscopically described by the water contact angle, were investigated using the molecular orbital theory. An atomistic model consisting of an H₂O molecule and a selected polymer crystal surface was analyzed in the isolated and the physisorbed states. The degree of interaction between the water molecule and the polymer surface was evaluated by considering the change of Mulliken charge at the oxygen site in the water molecule, and also the work of adhesion during the physisorption process. Such energetic quantities for several polymers were compared with the macroscopic water wettability/non-wettability. We found fairly good agreement between these approaches for the highly non-wettability polymers.