改进的GrabCut方法在舌诊系统中的应用

数字舌象图片的正确分割是实现计算机中医舌诊自动化系统的重要前提,为了高效而准确地分割出舌象,提出了一种基于四叉树与GrabCut的舌象分割方法.该方法首先利用四叉树分解对采集的舌象初分割,然后用相似区域的颜色均值优化GrabCut算法中高斯混合模型参数,最终完成舌象分割.实验结果表明：该算法使得舌象分割效率大大提高,具有很好的实用性.     

Preparation of Whisker β-Spodumene Glass–Ceramics

β-spodumene glass–ceramics with a whisker-like microstructure were prepared from the following materials (in wt%): 64.5 SiO₂, 18.0 Al₂O₃, 4.2 Li₂O, 4 ZrO₂, and 8 MgF₂. Scanning electron microscope (SEM) analysis showed that phase separation in the base glass leads to the formation of a primary crystal phase of MgF₂ that promotes the formation of spherical β-spodumene. Whisker spodumene crystals surrounded by spherical crystals are observed at 720°C after 1 h, and the whisker crystals grow at the cost of spherical crystals with increasing temperature and time. The flexural strengths of the glass–ceramics reach a maximum of 228 MPa after heat treatment at 850°C for 1 h.     

Catalytic characteristics of various rubber-reinforcing carbon blacks in decomposition of methane for hydrogen production

Carbon black has recently been reported to act as an effective catalyst for methane decomposition and to exhibit stable catalytic behavior despite carbon deposition, and thus it can be used for CO₂-free production of hydrogen from natural gas. In this work, various carbon blacks with different primary particle size were investigated with respect to methane decomposition under atmospheric pressure from 1123 to 1223 K. Catalytic characteristics, such as activity, activation energy and reaction order, were investigated and compared. It was observed that with decreasing primary particle size (or increasing specific surface area), the specific activity increased and the activation energy decreased. The reaction orders for various pelletized, rubber-reinforcing carbon blacks were 0.6–0.7, about the same regardless of the primary particle size, while they were near 1 for fluffy carbon blacks. Fluffy carbon black showed higher activity and activation energy than the pelletized carbon black of the same primary particle size. Changes of the surface morphology during carbon deposition were observed by TEM. Variations of the number of active sites were discussed in regard of the primary particle size, carbon deposition and binder. The presence of different types of active sites was also suggested.     

喷射电沉积块体纳米晶Co-Ni合金工艺的研究

利用扫描电子显微镜（SEM），能谱仪（EDS）及X射线衍射（XRD）等分析方法研究了工艺参数对电解液喷射电沉积法制备块体纳米晶Co-Ni合金沉积层成分及结构的影响。结果表明；在本实验条件下，随电解液喷射速度的增加，沉积层中钴含量增加，而晶粒尺寸减小；随电解液温度的升高，沉积层中钴含量减小到一定值后增大，晶粒尺寸呈相反的趋势。沉积层的表面形貌为胞状结构。     

Electrochemical behaviour of copper/LDPE composites in the simulated uterine solution

Two metal/insulator composites, copper/low-density polyethylene (LDPE) microcomposites and copper/LDPE nanocomposites, were prepared in a uniform metal mass fraction. The corrosion characteristics of the two composites in the simulated uterine solution have been studied by cyclic voltammetry, potentiodynamic polarization measurement and electrochemical impedance spectroscopy. Results obtained during this study show that there are obvious differences on the corrosive rates and mechanisms between the two materials. The nanocomposites have stable corrosive reaction, hardly passivation, low corrosion rate and high transformation ratio of copper to soluble cupric ions compared with microcomposites, which indicate that the nanocomposites are perfect to be the novel material for intrauterine device. The corrosion behaviour of the microcomposites was controlled by both the processes of the pervasion of Cu²⁺ and the transfer of the charge, while that of the nanocomposites was only controlled by the transfer of the charge. This paper also compared the corrosion behaviours of the composites and bulk copper in the simulated uterine solution, there were more insoluble subproducts in the corrosion process of bulk copper than the composites. Further, the electrochemical method in this study is proved to be useful to characterize the corrosion behaviour of high electrical resistivity materials.     

短纤维/橡胶发泡复合材料的微观结构及拉伸破坏机理

对锦纶短纤维增强的NR发泡材料的微观结构及拉伸破坏行为进行了研究，并分析了其破坏机理。采用未处理短纤维增强的NR发泡材料中短纤维成为泡孔的成核点，并大部分悬空在泡孔中，拉伸破坏时泡壁与短纤维结合处容易出现应力集中，成为裂纹的起始点，失效时短纤维大部分被抽出；预处理短纤维能与橡胶基体之间产生良好的粘合，从而处于橡胶基体中。其短纤维增强的NR发泡体拉伸产生的裂纹扩展时遇到纤维，纤维能起到承载应力、使应力转向、阻止裂纹扩展的作用，一定程度上改善了复合材料的拉伸强度等物理性。     

菲酐-纳米金修饰电极同时检测抗坏血酸、多巴胺和尿酸的研究

多孔结构的3,4,9,10-茈四甲酸二酐（PTCDA）作为骨架,用抗坏血酸做还原剂制备纳米金（GNPs）,制备了高催化活性的PrC—GNPs复合纳米材料。将该材料用于玻碳电极的修饰（GCE）,制得PTC—GNPs复合材料修饰的电极（PTC—GNPs／GCE）。该修饰电极能够同时对尿酸（UA）、多巴胺（DA）和抗坏血酸（AA）进行检测。分别使用循环伏安法（CV）和差分脉冲伏安法（DPV）对UA、DA和AA和在修饰电极上的电化学行为进行研究。实验结果表明,在pH=5．0的PBS缓冲体系中,该修饰电极对UA、DA和AA的线性响应范围分别为0．002～0．462mol／L、0．002～0．352mol／L和0．04～1．54mol／L。该传感在临床医学检测领域具有一定的应用前景。     

基于前向预测并行追踪的视频压缩传感方法

为了减小视频信号采集端的负担,提出一种基于压缩传感理论的视频压缩算法模型。该模型采用广义轮换矩阵获取视频帧的测量值,再结合视频压缩的运动补偿预测关键技术,消除视频帧间冗余。然后在并行贪婪追踪算法中引入前向预测技术作为重构算法,最终获取重构的压缩图像。实验对比了在不同算法下的重构图像和不同采样比下不同算法的重构PSNR值,然后利用所提方法得到视频序列的重构压缩图像。实验结果表明,该算法模型能较精确地获取压缩的视频图像,适合在视频压缩中应用。     

耐候性PP的研制

以聚烯烃弹性体（POE）为增韧材料、DICPK为结晶成核剂、BsSO4为无机填充剂，研制了耐候改性PP专用料。结果表明，当POE用量为5份、DICPK用量为0．3份、BaSO4用量为30份时，所得专用料能够满足耐候改性PP专用料的性能要求。     

Why Phenolic Acids Are Unlikely Primary Allelochemicals in Rice

Allelopathy in rice (Oryza sativa, L.) effective against weeds has been found in about 3.5% of tested rice germplasm in both laboratory and field experimentation. However, the allelochemicals responsible for growth inhibition of rice-associated weeds have not yet been identified. In the literature, phenolic acids are often mentioned as putative allelochemicals. If phenolic acids commonly reach growth inhibitory concentrations in rice ecosystems, it must be expected that the degree of tolerance to phenolic acids will vary among traditional rice cultivars or plant species adapted to rice environments having inherently different phenolic acid concentrations. Phenolic acids concentrations are normally greater in submerged than in aerobic soils. A dose–response study, however, showed that seedlings of rice cultivars adapted to submerged anaerobic soils did not have higher level of tolerance against p-hydroxybenzoic acid than did seedlings of varieties adapted to aerobic upland soils. Moreover, traditional rice cultivars had no greater tolerance than did improved cultivars that were recently bred for traits other than tolerance of phenolic acids. Similarly, there were no differences in tolerance of p-hydroxybenzoic acid between two Echinochloa weed species adapted to either anaerobic or aerobic growth conditions. Thus, neither the rice cultivars nor weed species had evolved different tolerance levels against the phenolic acid. However, all rice cultivars had significantly greater tolerance of p-hydroxybenzoic acid than did either weed species. In a second experiment, the rates at which rice plants released phenolic acids into solution cultures were measured for at least one month, the time period of greatest allelopathic activity following planting under field conditions. The maximum release rate of phenolic acids during the first month of growth was approximately 10 g/plant/day. At a conventional plant density, the release rate of phenolic acids would be approximately 1 mg/m²day. This order of release rate cannot provide concentrations remotely close to phytotoxic levels determined for these rice cultivars and weed species. The results presented in this paper do not preclude the possibility that phenolic acids might be one component in a mixture of chemicals that, when present simultaneously, are allelopathic.