Comparative study about heating systems for pultrusion process

Different heating systems have been used in pultrusion, where the most widely used heaters are planar resistances. The primary objective of this study was to develop an improved heating system and compare its performance with that of a system with planar resistances. In this study, thermography was used to better understand the temperature profile along the die. Finite element analysis was performed to determine the amount of energy consumed by the heating systems. Improvements were made to the die to test the new heating system, and it was found that the new system reduced the setup time and energy consumption by approximately 57%.     

Clinical evaluation of ultra-high-field MRI for three-dimensional visualisation of tumour size in uveal melanoma patients,with direct relevance to treatment planning

Objectives

To assess the tumour dimensions in uveal melanoma patients using 7-T ocular MRI and compare these values with conventional ultrasound imaging to provide improved information for treatment options.

Materials and methods

Ten uveal melanoma patients were examined on a 7-T MRI system using a custom-built eye coil and dedicated 3D scan sequences to minimise eye-motion-induced image artefacts. The maximum tumour prominence was estimated from the three-dimensional images and compared with the standard clinical evaluation from 2D ultrasound images.

Results

The MRI protocols resulted in high-resolution motion-free images of the eye in which the tumour and surrounding tissues could clearly be discriminated. For eight of the ten patients the MR images showed a slightly different value of tumour prominence (average 1.0 mm difference) compared to the ultrasound measurements, which can be attributed to the oblique cuts through the tumour made by the ultrasound. For two of these patients the more accurate results from the MR images changed the treatment plan, with the smaller tumour dimensions making them eligible for eye-preserving therapy.

Conclusion

High-field ocular MRI can yield a more accurate measurement of the tumour dimensions than conventional ultrasound, which can result in significant changes in the prescribed treatment.

     

Airfoil optimisation for vertical‐axis wind turbines with variable pitch

To advance the design of a multimegawatt vertical‐axis wind turbine (VAWT), application‐specific airfoils need to be developed. In this research, airfoils are tailored for a VAWT with variable pitch. A genetic algorithm is used to optimise the airfoil shape considering a balance between the aerodynamic and structural performance of airfoils. At rotor scale, the aerodynamic objective aims to create the required optimal loading while minimising losses. The structural objective focusses on maximising the bending stiffness. Three airfoils from the Pareto front are selected and analysed using the actuator cylinder model and a prescribed‐wake vortex code. The optimal pitch schedule is determined, and the loadings and power performance are studied for different tip‐speed ratios and solidities. The comparison of the optimised airfoils with similar airfoils from the first generation shows a significant improvement in performance, and this proves the necessity to properly select the airfoil shape.     

Low-cost deployment proposal to urban mobility in smart cities

Rational use of cars in smart cities can represent an economical and cheaper way to decrease the quantity of cars on the roads to better the life quality of the populations. This paper presents a low-cost deployment proposal called “URCa project” to reach these goals and proposes a paradigm change by sharing the cars considering some logistic aspects including car ride mechanism. Technical feasibility to deploy this solution was checked by means of a proof of concept. The concept was proven by passenger counting and license plate that are essential information in this solution were obtained taking photographs, applying two types of recognition algorithms and sending the results to be stored and evaluated by analytic data processes of a transit regulatory agency showing that this project is technically viable. The low-cost solution was justified by a financial analysis based on both costs (URCa solution and a bridge) that has shown a ratio of 1:10,000.

     

Evaluation of the effect of heat input in superduplex stainless steel deposition by the plasma powder process*

Plasma powder surfacing is one of the latest processes for application of coatings, with control of dilution as its main feature. Surfacing with superduplex stainless steels is an interesting option for the construction and repair of equipment for applications in a highly corrosive environment, allowing the desired characteristics to be achieved: corrosion resistance and good mechanical properties. The aim of this work is to assess the ferrite content in the weld metal and the mechanical characteristics via microhardness profiles in surfacing of C-Mn steel pipes with deposition of UNS S32760 by plasma powder surfacing. Welding operations were carried out on pipes with deposition of SDSS, employing three welding heat input levels, varying the welding speed or the welding current. Then the geometry was analysed, the ferrite content in the weld metal was quantified and the microhardness profile was recorded. Variation in welding heat input caused changes in weld bead geometry, with variation in the welding current producing the most significant changes. Increase in heat input caused decrease in ferrite content of the weld metal. Regarding microhardness, only the condition with a higher level of welding current gave sufficiently high levels of microhardness in the weld metal.     

In vitro intestinal absorption of amino acid mixtures extracted from codfish (Gadus morhua L.) salting wastewater

This study reports on the intestinal permeability of salt‐containing mixtures of amino acids extracted from codfish salting wastewater. Permeability was evaluated in vitro using the Caco‐2 cell line model; cell integrity during exposure to mixtures of amino acids was estimated by measuring the transepithelial electrical resistance (TEER). The effect of salt (NaCl) on the permeability and on the intestinal cell's integrity was also examined. Permeation rate (i.e. transport) was ≥95% for all amino acids except for creatine, for which it was 6%. Values for apparent permeability coefficients, P_app > 10^?5 cm s^?1, for mixture with isotonic concentration of NaCl suggest that amino acids are very likely to be absorbed in humans. Mixture with a hypertonic level of NaCl exerts a cytotoxic effect in intestinal cells resulting in a loss of epithelium integrity. Results show that isotonic mixture of amino acids extracted from codfish salting wastewater could be used in food, feed, cosmetic and pharmaceutical formulations. These applications could contribute to the fish industry sustainability.     

Identification of components of Brazilian honey by 1H NMR and classification of its botanical origin by chemometric methods

The potential of NMR spectroscopy to differentiate honeys concerning to the nectar employed in its production was evaluated. The application of chemometric methods to ¹H NMR spectra has allowed to discriminate the honeys produced in the state of São Paulo, being identified the signals of responsible substances for the discrimination. Application of PCA and HCA methods to ¹H NMR data have resulted in the natural clustering of the samples. Wildflower honeys were characterized by higher concentration of phenylalanine and tyrosine. Citrus honeys showed higher amounts of sucrose than other compounds, while eucalyptus honeys had higher amount of lactic acid than the others. Assa-peixe honeys showed spectra similar to eucalyptus and citrus. Sugar-cane honeys showed some signals similar to eucalyptus and citrus honeys, but also showed the tyrosine and phenylalanine signals. Adulterated honeys showed 5-hydroxymethylfurfural, citric acid and ethanol signals. KNN, SIMCA and PLS-DA methods were used to build predictive models for honey classification. In the commercial honeys prediction KNN, SIMCA and PLS-DA models correctly classified 66.7; 22.2 and 72.2% of the samples, respectively.     

A DSL for specifying run-time adaptations for embedded systems: an application to vehicle stereo navigation

The traditional approach for specifying adaptive behavior in embedded applications requires developers to engage in error-prone programming tasks. This results in long design cycles and in the inherent inability to explore and evaluate a wide variety of alternative adaptation behaviors, critical for systems exposed to dynamic operational and situational environments. In this paper, we introduce a domain-specific language (DSL) for specifying and implementing run-time adaptable application behavior. We illustrate our approach using a real-life stereo navigation application as a case study, highlighting the impact and benefits of dynamically adapting algorithm parameters. The experiments reveal our approach effective, as such run-time adaptations are easily specified in a higher level by the DSL, and thus at a lower programming effort than when using a general-purpose language such as C.     

Improvement of mead fermentation by honey‐must supplementation

Through honey's fermentation, diverse beverages can be obtained, among which is mead, an alcoholic drink with 8 to 18% of ethanol (v/v). Since honey is a matrix with a low nutrient concentration and other unfavourable growth conditions, several problems are usually encountered, namely delayed or arrested fermentations, unsatisfactory quality parameters and lack of uniformity of the final product, as well as unpleasant sensory properties. In this context, the aim of this work was to optimize mead production through honey‐must supplementation with (a) salts, (b) vitamins or (c) salts + vitamins. The effects of the honey‐must formulation on the fermentation kinetics, growth profile and physicochemical characteristics of final meads were evaluated. The results showed minor differences in the fermentation profile and time between fermentations with the different formulations. The growth profile was influenced more by the yeast strain than by the supplements added to the honey‐must. In general, the honey‐must composition did not influence meads’ final characteristics, except regarding the SO₂ concentration of the meads produced using the strain QA23. In summary, the addition of salts and/or vitamins to honey‐must had no positive effects on the fermentation, growth profile or characteristics of the final products. Copyright © 2015 The Institute of Brewing & Distilling     

The effect of co-encapsulation of Lactobacillus rhamnosus GG ATCC 53103 with inulin on alginate/chitosan matrix: the viability in fermented soy blend and simulated digestive system

This research verified the ability of Lactobacillus rhamnosus encapsulated with inulin to tolerate the simulated digestive system and their viability in a soy blend. Probiotic encapsulated in alginate-chitosan matrix without inulin presented a better encapsulation efficiency (80.92%) than encapsulation with inulin (57.39%). On the 28th day, the count of probiotics decreased by 3.42 and 1.99 logarithmic cycles of free and encapsulated cells without inulin, respectively. In contrast, the microorganisms encapsulated with inulin showed an increase of 1.26 logs CFU g⁻¹. During gastrointestinal simulation, cell counts decreased by 0.78, 1.55 and 1.95 CFU g⁻¹ logs for encapsulated cells without inulin, free and encapsulated with inulin, respectively. Sensory panellists liked the fermented soy blend with encapsulated lactobacilli, and this result shows the possibility to create new probiotic foods of plant origin. Therefore, the alginate/chitosan matrix can be considered adequate for the encapsulation of L. rhamnosus. The inulin reduces the encapsulation efficiency and increases the cell loss in gastrointestinal simulation. Considering cellular losses, the best option for preparing a fermented soy blend is to use L. rhamnosus encapsulated without inulin.