"Cognitive-neuropsychological function in chronic physical aggression and hyperactivity": Correction to Séguin et al. (2004).

Reports an error in "Cognitive-Neuropsychological Function in Chronic Physical Aggression and Hyperactivity" by Jean R. Séguin, Daniel Nagin, Jean-Marc Assaad and Richard E. Tremblay (Journal of Abnormal Psychology, 2004[Nov], Vol 113[4], 603-613). The use of a weighted procedure within SAS PROC GLM inflated F statistics and underestimated standard errors that affected only conclusions from secondary analyses that were drawn about the specificity of working memory effects to physical aggression and hyperactivity. The corrected conclusions are presented in the erratum. The last two sentences of the abstract also needed to be corrected in order to reflect the new conclusions. The corrected sentences appear in the erratum as well. (The following abstract of the original article appeared in record 2004-20178-011.) Histories of violence and of hyperactivity are both characterized by poor cognitive-neuropsychological function. However, researchers do not know whether these histories combine in additive or interactive ways. The authors tested 303 male young adults from a community sample whose trajectories of teacher-rated physical aggression and motoric hyperactivity from kindergarten to age 15 were well defined. No significant interaction was found. In a 1st model, both histories of problem behavior were independently associated with cognitive-neuropsychological function in most domains. In a 2nd model controlling for IQ, general memory, and test motivation, the 3 working-memory tests (relevant to executive function) remained associated with physical aggression, and 1 remained associated with hyperactivity. These results support an additive model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Generic CANDU 6 plant severe accident analysis employing SCAPSIM/RELAP5 code

The purpose of the present study is to assess the capability of SCDAPSIM/RELAP5 to perform the deterministic analysis for postulated severe accidents for CANDU plant and to gain information for potential improvements in code modelling. SCDAPSIM/RELAP5 is a widespread and detailed computer code for severe accident analysis that can be adapted to benchmark the CANDU dedicated tools, MAAP4–CANDU and ISAAC. Simulations of station blackout (SBO) and large loss-of-coolant accident (LOCA) scenarios, which, through further system failures, may eventually lead to severe core damage (SCD) accident in a CANDU 6, are presented. The paper provides details concerning the methodology and nodalization used, and interprets the results obtained. Comparisons of the SCDAPSIM/RELAP5 simulations with the MAAP4–CANDU code reported results are presented. Also, some insights are given on possible reasons for the discrepancies between the SCDAPSIM/RELAP5 and MAAP4–CANDU code predictions.     

Laminar Confined Impinging Jet into a Porous Layer

This work aims at studying laminar impinging jets on surfaces covered with a layer of a porous material. This contribution may provide insight into the design and optimization of heat and mass transfer processes over surfaces. Numerical simulations are presented and the porous substrate is treated as a rigid, homogeneous, and isotropic medium. Macroscopic transport equations are written for a representative elementary volume (REV), yielding a set of equations that is valid for the entire computational domain, including both the porous layer attached to the surface and the fluid layer over the porous substrate. These equations are discretized using the control-volume method and the resulting system of algebraic equations is relaxed using the Strongly Implicit Procedure (SIP) methods. The SIMPLE algorithm is used to handle the pressure–velocity coupling. Results for flow, in both clear and porous flow domains, are given in terms of streamlines patterns, velocity profiles, pressure contours, and friction coefficient along the impinging wall. The influence of porosity on the flow pattern is shown to be very low in comparison to the effects caused by varying permeability, fluid-layer height, and porous-layer thickness. These finding could be used to advantage when designing engineering equipment, since the use of selected porous materials could reduce undesirable recirculation zones, promote quick flow redistribution, and adjust pressure to required levels.     

Colloidal Processing of Zirconium Diboride Ultra‐High Temperature Ceramics

Colloidal processing of the Ultra‐High Temperature Ceramic (UHTC) zirconium diboride (ZrB₂) to develop near?net‐shaping techniques has been investigated. The use of the colloidal processing technique produces higher particle packing that ultimately enables achieving greater densification at lower temperatures and pressures, even pressureless sintering. ZrB₂ suspension formulations have been optimized in terms of rheological behavior. Suspensions were shaped into green bodies (63% relative density) using slip casting. The densification was carried out at 1900°C, 2000°C, and 2100°C, using both hot pressing at 40 MPa and pressureless sintering. The colloidally processed materials were compared with materials prepared by a conventional dry processing route (cold pressed at 50 MPa) and subjected to the same densification procedures. Sintered densities for samples produced by the colloidal route are higher than produced by the dry route (up to 99.5% relative density by hot pressing), even when pressureless sintering is performed (more than 90% relative density). The promising results are considered as a starting point for the fabrication of complex‐shaped components that can be densified at lower sintering temperatures without pressure.     

Automatic reconstruction of as-built building information models from laser-scanned point clouds: A review of related techniques

Building information models (BIMs) are maturing as a new paradigm for storing and exchanging knowledge about a facility. BIMs constructed from a CAD model do not generally capture details of a facility as it was actually built. Laser scanners can be used to capture dense 3D measurements of a facility's as-built condition and the resulting point cloud can be manually processed to create an as-built BIM — a time-consuming, subjective, and error-prone process that could benefit significantly from automation. This article surveys techniques developed in civil engineering and computer science that can be utilized to automate the process of creating as-built BIMs. We sub-divide the overall process into three core operations: geometric modeling, object recognition, and object relationship modeling. We survey the state-of-the-art methods for each operation and discuss their potential application to automated as-built BIM creation. We also outline the main methods used by these algorithms for representing knowledge about shape, identity, and relationships. In addition, we formalize the possible variations of the overall as-built BIM creation problem and outline performance evaluation measures for comparing as-built BIM creation algorithms and tracking progress of the field. Finally, we identify and discuss technology gaps that need to be addressed in future research.     

Rheological Properties of Honey from Burkina Faso: Loss Modulus and Complex Viscosity Modeling

This study evaluated the rheological behavior of Burkina Faso honey and the use of exponential and polynomial models to predict the influence of chemical composition and temperature on the viscoelastic parameters: complex viscosity (η*) and loss modulus (G’’). Samples were first characterized by evaluating: water activity, 5-hydroxy methyl furfural, sugars (fructose, glucose, and sucrose), electrical conductivity, moisture, and color. Dynamic rheological properties were obtained at different temperatures (5, 10, 15, 20, 25, 30, and 40°C). All the honeys displayed Newtonian behavior. Complex viscosity and loss modulus can be predicted based on the chemical composition and temperature using polynomial models (R² > 98.00%).     

2-Fatty Acrylic Acids: New Highly Derivatizable Lipophilic Platform Molecules

This paper reports the incorporation of an alpha-methylene unit into fatty acid skeletons. Since the new olefin is conjugated with the carboxylate, it is susceptible to 1,4-(Michael) additions. We have used multifunctional thiols and amines for additions at the methylene. The resulting products possess clusters of functionality grouped at one end of a hydrophobic tail. These structural patterns will be of use in the design of new types of bio-based surfactants and polymers. One particularly promising pattern of functionality that can be obtained through oxidation and reduction chemistry is a 2-fatty 1,2,3-propanetriol, or a lipophilized glycerol moiety.     

Structure–properties relations in flexible polyurethane foams containing a novel bio-based crosslinker

The structure, morphology and properties of PU foams containing the novel bio-based crosslinker 3-hydroxy-N,N-bis(2-hydroxyethyl)butanamide (HBHBA) were investigated in comparison with PU foams containing the conventional crosslinker diethanolamine (DEOA). FTIR results indicate that HBHBA increases the degree of microphase separation in the foam and hydrogen bond concentration in the hard domains, suggesting that the incorporation of HBHBA produces better ordering of hard domains as compared with DEOA-crosslinked foam. Uniquely, the tri-functional crosslinker, HBHBA, can act as a chain extender due to the presence of a low reactivity secondary hydroxyl, reducing the crosslink density of the HBHBA foam vs. that of DEOA foam. Concerning foam morphology, the lower reactivity of HBHBA tends to favor larger cell sizes and more complete cell opening as compared to the more reactive DEOA. This behavior may in turn be related to the onset of phase separation and the rate of viscosity build-up. Mechanical properties measurements indicate that the elongation at break and the tensile strength of the HBHBA foam are ∼33% and 41% higher than the DEOA foam, respectively. The HBHBA foam also exhibits 40% greater tear strength and 10% greater compression strength without any loss in resilience. These results indicate that this bio-based crosslinker enhances properties and has clear potential in molded foam applications.