Polypropylene/silica micro‐ and nanocomposites modified with poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)

The effects of different silica loadings and elastomeric content on interfacial properties, morphology and mechanical properties of polypropylene/silica 96/4 composites modified with 5, 10, 15, and 20 vol % of poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) SEBS added to total composite volume were investigated. Four silica fillers differing in size (nano‐ vs. micro‐) and in surface properties (untreated vs. treated) were chosen as fillers. Elastomer SEBS was added as impact modifier and compatibilizer at the same time. The morphology of ternary polymer composites revealed by light and scanning electron microscopies was compared with morphology predicted models based on interfacial properties. The results indicated that general morphology of composite systems was determined primarily by interfacial properties, whereas the spherulitic morphology of polypropylene matrix was a result of two competitive effects: nucleation effect of filler and solidification effect of elastomer. Tensile and impact strength properties were mainly influenced by combined competetive effects of stiff filler and tough SEBS elastomer. Spherulitic morphology of polypropylene matrix might affect some mechanical properties additionally. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41486.     

Internalization and Accumulation in Dendritic Cells of a Small pH‐Activatable Glycomimetic Fluorescent Probe as Revealed by Spectral Detection

DC‐SIGN, an antigen‐uptake receptor in dendritic cells (DCs), has a clear role in the immune response but, conversely, can also facilitate infection by providing entry of pathogens into DCs. The key action in both processes is internalization into acidic endosomes and lysosomes. Molecular probes that bind to DC‐SIGN could thus provide a useful tool to study internalization and constitute potential antagonists against pathogens. So far, only large molecules have been used to directly observe DC‐SIGN‐mediated internalization into DCs by fluorescence visualization. We designed and synthesized an appropriate small glycomimetic probe. Two particular properties of the probe were exploited: activation in a low‐pH environment and an aggregation‐induced spectral shift. Our results indicate that small glycomimetic molecules could compete with antigen/pathogen for binding not only outside but also inside the DC, thus preventing the harmful action of pathogens that are able to intrude into DCs, for example, HIV‐1.     

Preparation of dehydroxylated and delaminated talc: Meta-talc

The roentgen-amorphous delaminated and dehydroxylated phase was prepared applying intensive milling procedure and subsequent thermal treatment of talc. Due to the similarity in properties and in thermal behavior of this material with roentgen-amorphous delaminated and dehydroxylated kaolinite phase, i.e. meta-kaolinite, the name meta-talc was suggested for this material. The properties and the behavior during thermal treatment were investigated using thermal analysis, x-ray diffraction analysis, infrared spectroscopy and scanning electron microscopy. The suggested procedure changes the activation energy of dehydroxylation, the behavior during thermal treatment and the phase composition of the product. The kinetics and thermodynamics of the thermal transition were evaluated using Kissinger equation and Eyering law.     

Evaluation of microbial toxins,trace elements and sensory properties of a high-theabrownins instant Pu-erh tea produced using Aspergillus tubingensis via submerged fermentation

Theabrownins (TB) are polymeric phenolic compounds associated with the multiple bioactivities of Pu-erh tea, a post-fermented Chinese dark tea. High-TB instant Pu-erh tea was produced via a novel submerged fermentation (SF) using Aspergillus tubingensis and compared with samples produced commercially via the conventional solid-state fermentation (SSF). Viable microorganisms and microbial toxins, especially aflatoxins B₁, G₁, B₂, G₂, cyclopiazonic acid, fumonisins B₁, B₂, B₃ and ochratoxin A, were below the detection limit in all samples. Fewer microbial metabolites were found in SF instant tea compared with the SSF teas. Based on an adult consuming 1 g of instant Pu-erh tea daily, the dietary intake of investigated elements was below the safe limits recommended by various authorities. Tasters viewed the instant tea infusions as very mild, smooth, mellow and full. This suggested that submerged fermentation using A. tubingensis offers a speedy and safe alternative to commercial production of instant Pu-erh tea.     

The functionality of woven fabric from air-jet yarn from the mixture of CO/PA and CO/PES fibres in the weft direction

The purpose of presented research is to find out the influence of air-jet yarn from the mixture of CO/PA (50/50) and CO/PES (67/33) fibres on functionality of woven fabric in the plain weave.The first part of the study is directed to the mechanical and physical properties of air-jet yarns (16.7 tex) from CO/PA and CO/PES fibres, while the second part of the study focuses on permeability properties of fabrics with air-jet yarns in the weft. The results show that air-jet yarn in the weft direction influences on the water vapor transmission and thermal conduction increase and air permeability decrease.Incorporation of air-jet yarn in the weft direction also improves breaking extension level.The results of presented research also show that the incorporation of air-jet yarn in the weft has statistical important influence on thermal conduction, water-vapor and air permeability changes.     

Study of the growth and structural properties of InMnAs dots grown on high-index surfaces by MOVPE

The growth of InMnAs quantum dots by low pressure MOVPE technique on patterned (1 0 0) GaAs substrates was studied. The patterning in the form of ridges with sidewalls having (2 1 1) and (3 1 1) facets was prepared by wet chemical etching via a GaAs/AlAs sacrificial etching mask structure. AFM studies showed that the dots formation and distribution were very similar for both types of facets under study. InMnAs dot density on the (3 1 1) plane is about 5–7 times lower in comparison to that on the (1 0 0) planar substrate. The dots on sidewalls are larger in comparison to average dots formatted on planar GaAs (1 0 0) substrate. The lateral dimensions of these dots are in the interval 100–180 nm. In addition, dot distribution along the sidewall (from top to bottom) is not uniform. A higher dot concentration was observed close to the intersection of (3 1 1) facets with concave bottom part of the valleys between ridges. Finally, no dots were grown on the (1 0 0) plane created by self-faceting on the top of the triangular ridges. This is probably a consequence of the high quality of the (1 0 0) facet formed by lateral overgrowth.     

Fluoride in drinking water and dental fluorosis

In this study we determined the fluoride content in drinking water and hair of 12-year-old schoolchildren from different Serbian municipalities, i.e. Valjevo, Veliko Gradiste, Kacarevo and Vranjska Banja. The analyses were performed using composite fluoride ion-selective electrode. Average fluoride levels were 0.10, 0.15, 0.79 and 11 ppm in well water, 0.07, 0.10, 0.17 and 0.15 ppm in tap water, 19.3, 21.5, 25.4, and 32.5 ppm in hair samples, in Valjevo, Veliko Gradiste, Kacarevo and Vranjska Banja, respectively. Correlation analysis indicated statistically significant positive relationship between fluoride in wells water and fluoride in hair, for all municipalities: correlation coefficients were 0.54 (p < 0.05), 0.89, 0.97 and 0.99 (p < 0.001), in Vranjska Banja, Valjevo, Veliko Gradiste, and Kacarevo, respectively. Positive correlation was obtained also between fluoride in tap water and hair samples in all regions under the study, with statistical significance only in Valjevo municipality, p < 0.05. Dental examination of schoolchildren confirmed dental fluorosis only in the region of Vranjska Banja. Moreover, in endemic fluorotic region of Vranjska Banja, positive and statistically significant correlations were confirmed between fluoride in well water and dental fluorosis level (r = 0.61; p < 0.01) and additionally between fluoride in hair and dental fluorosis level (0.62; p < 0.01). The primary findings from this study have shown that fluoride content in hair is highly correlated with fluoride content in drinking water and dental fluorosis level, indicating that hair may be regarded as biomaterial of high informative potential in evaluating prolonged exposure to fluorides and to individuate children at risk of fluorosis regardless of the phase of teeth eruption.     

Creativity,play and transgression: children transforming spatial design

Spatial designers, who engage children in their design process, most often frame children in this context as experts in their own lives. Findings from a study based at the University of Sheffield, point to new understandings of this participatory role, in which children move towards the role of designer. Drawing on interviews including visual methods with 16 spatial designers and guided by phenemonography, the paper seeks to represent the designers’ perspectives on the under-explored area of child–designer interactions. Findings suggest that the designers understand these interactions to comprise a reciprocal and co-created space – a sphere of behaviours, actions and ways of being which together becomes an enabler of change. It is proposed that what Bhabha (The Location of Culture, 1994) refers to as a ‘Third Space’ in which the ‘dominant culture might be temporarily subverted and its structural systems of power and control renegotiated’ can be re-imagined in this co-design context. The paper weaves together theoretical discourse and empirical illustrations of perceived creativity, play and transgression, which – at their intersection – support a potential transformation of understandings of children as co-designers and of the design process itself.     

Investigating the tension load of rubber composites by impact dynamic testing

This work deals with establishing the tension load by impact dynamic testing of rubber composite conveyor belts. The value of tension load affects the shape of the used impactor and use of a support system as well as the weight of the ram and the impact height. An increase in the allowable stress when the belt is tensioned was examined during the test, to determine the effect of impact on the tension load. The obtained values of tension load are assessed using basic mathematical and statistical methods. Using the Design of Experiments method, factors that significantly affect the value of the tension load are identified.