Effect of elemental sulfur in the crosslinking reaction of poly(vinyl chloride) with tetramethyl thiuram disulfide

The effect of elemental sulfur (S₈) and tetramethyl thiuram disulfide (TMTD) on the chemical crosslinking of PVC is studied. The tensile strength, elongation at break, and gel content of crosslinked and uncrosslinked PVC molded samples, cured at different times in hot air, are evaluated. It was found that crosslinking PVC with TMTD improves its mechanical properties, and adding S₈ produces a slight improvement. Also, the S₈ presence accelerated the PVC/TMTD crosslinking reaction when the crosslinking reaction was carried out under shear forces, but not when the curing was done in hot air, where the S₈ retards the process.     

Morphology and mechanical properties of polypropylene/organoclay nanocomposites

Polypropylene (PP) nanocomposites were prepared by melt intercalation in an intermeshing corotating twin‐screw extruder. The effect of molecular weight of PP‐MA (maleic anhydride‐ modified polypropylene) on clay dispersion and mechanical properties of nanocomposites was investigated. After injection molding, the tensile properties and impact strength were measured. The best overall mechanical properties were found for composites containing PP‐MA having the highest molecular weight. The basal spacing of clay in the composites was measured by X‐ray diffraction (XRD). Nanoscale morphology of the samples was observed by transmission electron microscopy (TEM). The crystallization kinetics was measured by differential scanning calorimetry (DSC) and optical microscopy at a fixed crystallization temperature. Increasing the clay content in PP‐ MA330k/clay, a well‐dispersed two‐component system, caused the impact strength to decrease while the crystallization kinetics and the spherulite size remained almost the same. On the other hand, PP/PP‐MA330k/clay, an intercalated three‐component system containing some dispersed clay as well as the clay tactoids, showed a much smaller size of spherulites and a slight increase in impact strength with increasing the clay content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1562–1570, 2002     

(<Emphasis Type="Italic">Z,Z</Emphasis>)-6,9-Heneicosadien-11-One: Major Sex Pheromone Component Of Painted Apple Moth, <Emphasis Type="Italic">Teia anartoides</Emphasis>

(Z, Z)-6,9-Heneicosadien-11-one (Z6Z9-11-one-21Hy) was identified as the major sex pheromone component of the painted apple moth (PAM), Teia anartoides (Lepidoptera: Lymantriidae), on the basis of (1) comparative gas chromatographic-electroantennographic detection (GC-EAD) analyses, GC-mass spectrometry (MS), high-performance liquid chromatography (HPLC)-MS, and HPLC-UV/visible spectroscopy of pheromone gland extracts and authentic standards; (2) GC-EAD analyses of effluvia of calling females; and (3) wind tunnel and field trapping experiments with a synthetic standard. In field experiments in Australia, synthetic Z6Z9-11-one-21Hy as a single component attracted male moths. Wind tunnel experiments suggested that a 4-component blend consisting of Z6Z9-11-one-21Hy, (6Z,9R,10S)-cis-9,10-epoxy-heneicosene (Z6-9R10S-epo-21Hy), (E, E)-7,9-heneicosadien-6,11-dione (E7E9-6,11-dione-21Hy), and 6-hydroxy-(E, E)-7,9-heneicosadien-11-one (E7E9-6-ol-11-one-21Hy) (all present in pheromone gland extracts) might induce more males to orient toward, approach, and contact the source than did Z6Z9-11-one-21Hy as a single component. Additional experiments are needed to determine conclusively whether or not Z6-9R10S-epo-21Hy, E7E9-6,11-dione-21Hy, and E7E9-6-ol-11-one-21Hy might be minor sex pheromone components of PAM. Moreover, attractiveness of synthetic pheromone and virgin PAM females needs to be compared to determine whether synthetic pheromone could replace PAM females as trap baits in the program to monitor eradication of exotic PAM in New Zealand.     

Dyeing cotton with reactive dyes under neutral conditions

This paper describes a new method to dye cotton with selected reactive dyes by long-liquor – or so-called 'exhaustion'– processes under neutral conditions. Particularly promising results were obtained with reactive dyes containing free vinyl sulphone residues. Although there are dyes on the market that contain free vinyl sulphone groups, for example, the Novacron C (Huntsman) range of dyes, many of this class contain 'blocked' vinyl sulphone residues; examples include sulphatoethylsulphone or chloroethylsulphone precursor groups, and these may be preactivated to the highly reactive vinyl sulphone form simply by a mild alkali treatment. After this activation, neutral, long-liquor dyeings can be carried out at the boil in the presence of electrolyte. This new dyeing method gave very good results in terms of overall fixation efficiency values, without the need for alkali additions.     

Moisture absorption by cyanate ester modified epoxy resin matrices. Part I. Effect of spiking parameters

The moisture absorption of cyanate ester modified epoxy resin matrices has been studied under thermal spiking conditions. Enhanced moisture absorption has been observed at spike-temperatures above 120 °C. The results of the desorption studies on both control specimens and the spiked specimens showed that some of the water molecules remained entrained in the polymer. It is postulated that this water could be associated with that which is hydrogen bonded or from the hydrolysis of isolated residual cyanate ester groups because the concentration of entrained water remains constant at spike-temperatures below 180 °C. Above 180 °C a thermally activated process, leading to chain scission as indicated by a reduced recoverability of the glass transition temperature (T_g) on drying.On isothermal resorption, the moisture concentration was found to be similar to that achieved through thermal spiking, showing that the entrained water at the lower spike-temperatures can also be achieved under mild conditions. The T_g is reversibly recovered to within 5 °C, which indicates a degree of relaxation rather than degradation. The moisture diffusion coefficient estimated from the resorption curves is lower than those estimated from the absorption and desorption curves. The isothermal resorption diffusion coefficient also decreased with increasing spike temperature. It is proposed that thermal spiking induced a relaxation of the network but as the spike-temperature approaches the transition region of the wet polymer, further hydrolytically induced relaxation events become feasible.     

Molecular modeling of antibody-antigen complexes between the Brucella abortus O-chain polysaccharide and a specific monoclonal antibody

A molecular model of the binding site of an anti-carbohydrateantibody (YsT9.1) has been developed using computer-assistedmodeling techniques and molecular dynamics calculations. Sequencehomologies among YsT9.1 and the Fv regions of McPC603, J539and human Bence-Jones protein REI, all of which have solvedcrystal structures, provided the basis for the modeling. Thegroove-type combining site model had a topography which wascomplementary to low energy confonners of the polysaccharide,a Brucella O-antigen, and the site could be almost completelyfilled by a pentasaccharide epitope in either of two dockingmodes. Putative interactions between this epitope and the antibodyare consistent with the known structural requirements for bindingand lead to the design of oligosaccharide inhibitors that probethe veracity of the modeled docked complex. Ultimately boththe Fv model and the docked complex will be compared with independentcrystal structures of YsT9.1 Fab with and without pentasaccharideinhibitor, currently at the stage of refinement.     

Investigation of the mechanistic basis for ferrocene activity during the combustion of vinyl polymers

The influence of ferrocene on the flammability and smoke generation behavior and thermal characteristics of poly(vinyl chloride) (PVC) and poly(vinyl alcohol) (PVC) was examined in order to understand the basis of ferrocene's activity as a flame-retardant and smoke-suppressant additive. Ferrocene increased char formation in PVC by 20–60% while increasing the limiting oxygen index (O.I.) by 15–19%. Little char was found either with or without ferrocene in PVA, which had little improvement in O.I. Visible smoke was significantly decreased by ferrocene in PVA and in PVC of low to moderate molecular weight, but was unchanged in high molecular weight PVC. O.I. of PVC appeared to vary with molecular weight of the polymer. Thermogravimetric analyses and thermal degradation experiments showed that ferrocene promotes early weight loss and crosslinking in PVC. This effect is coincidental with the formation of ferricenium cation, which was identified by its visible spectrum and which may be a possible catalyst. Smoke inhibition of PVA by ferrocene occurs predominantly through gas-phase processes, while in PVC evidence and analogy for activity in both the gas phase and condensed phase are found.     

Aerodynamics and aerosol particle deaggregation phenomena in model oral-pharyngeal cavities

The results of numerical simulations of the aerodynamics and of solid aerosol deaggregation phenomena arising in the process of airflow through various model human oropharyngeal cavities are reported. Special attention is given to the relevance of these simulations to the inhalation of dry-powder therapeutic aerosols. Several two- and three-dimensional mouth and throat geometries (terminating just beyond the larynx) are considered. Cross-sectional area-averaged viscous stress values are numerically determined as a function of distance from the mouth opening. These values, ranging from approximately 10 to 500 dyn cm⁻², are compared with estimates of Van der Waals attractive forces per unit area of particle-particle contact so as to evaluate the ability of the flowing airstream to deaggregate aerosol particles that enter the mouth in an aggregated state (held together principally by Van der Waals attractive forces). Estimates of airstream viscous stress differ markedly depending on whether the geometry is two- or three-dimensional. Quantitative differences between flow in a 90°-bend model and an oropharyngeal geometry numerically reconstructed from a cast of a human mouth and throat are especially significant in regards to the ability of the airstream to break apart particle agglomerates. For all geometries it is observed that increasingly smaller particle agglomerates may potentially be separated as the airflow rate increases from 30 to 2001 min⁻¹. At the highest airflows, aggregated particles of diameter near to or even below 1 μm may potentially be separated by the airflow. If separation of particle agglomerates is to occur, it appears far more likely to take place in the throat than in the mouth. This is especially apparent for the more physiologically faithful oropharyngeal geometries considered.     

配贫瘦煤炼焦的探讨与实践

介绍了在生产性实验中配加不同比例的贫瘦煤炼焦对焦炭强度的影响 ,最经济合理的配煤比可使焦炭的强度有一定改善。     

A/O法废水处理碱源的研究与实践

从理论到实践阐述了以具有价格优势的 Na OH替代 Na2 CO3做碱源 ,解决 A / O法运行成本高的问题。