A lower carbon footprint process for production of metals from their oxide sources

This paper will describe the solid oxide membrane (SOM) process as it applies to the energy-efficient and environmentally sound production of magnesium from magnesium oxide. Also, it will describe the challenges encountered while using this process for the production of transition metals like titanium from its higher oxides. Finally, a novel magnesiothermic SOM process will be proposed that can enable production of transition metals from its higher oxides.     

Recommendations for the prevention of coronary artery disease in Asians: a scientific statement of the International College of Nutrition

PURPOSE: Two types of glass wool were used to remove leukocytes in semen for evaluation of reactive oxygen species production by spermatozoa in oligozoospermic patients with leukocytospermia. METHODS: Semen samples were prepared using fine-structure glass wool (SpermFertil) and coarse-structure glass wool. In each treatment group, native semen was evaluated for sperm concentration, percentage motility, viability, leukocyte concentration, and production of reactive oxygen species. RESULTS: Electron microscopically, SpermFertil showed a higher number of leukocytes attached to the fibers compared to coarse-structure glass wool. Leukocytes in native semen and after glass wool filtration as determined by peroxidase cytochemistry confirmed this observation. Reactive oxygen species decreased from 45.303 counts/10(7) viable cells in native semen to 15.806 counts/10(7) cells in coarse structure wool and 7.465 counts/10(7) cells in Spermfertil, respectively. CONCLUSIONS: Removal of leukocytes from semen of oligozoospermic patients by means of glass wool filtration is a useful method to distinguish production of reactive oxygen species by leukocytes versus sperm cells.     

Enumeration of minimal cutsets from matrix representation of directed/undirected networks

This paper describes an algorithm for finding the minimal cutsets between a specified source and terminal nodes of directed/undirected networks. Adjacent nodes of a source node/merged node are determined by the collection of node numbers of columns corresponding to non-zero elements of the first row of the adjacency matrix to form the reduced adjacency matrix (RAM) corresponding to merged nodes. Connectivity of RAM has been checked to obtain the minimal cutsets.     

Sintering study of calcium aluminate

Measurement of the initial sintering shrinkage of CaAl₂O₄ at temperatures of 1300, 1325 and 1350 °C are reported. The particle sizes chosen were –53 + 45, –63 + 53 and –75 + 63 microns and the soaking periods were from 15 to 360 min. A time dependence of the shrinkage has shown that volume diffusion is the dominant mechanism of sintering. At any given time and temperature, the per cent shrinkage was found to be a decreasing function of particle size. The activation energy for the sintering of CaAl₂O₄ was found to be 766.38 KJ mol^–1.     

Evaluation of rainfall networks using entropy: II. Application

This paper, the second in the series, applies the entropy approach to space and time evaluation of rainfall networks in Louisiana. The evaluation is made for five sampling intervals: daily, 2-day, weekly, monthly, and yearly, and for two separate seasons. In each case, the best combination of raingages is suggested and the lines of equal information (isoinformation contours) are constructed showing the areas of greater or less information transfer. The isoinformation lines are especially suitable in decisions concerning the expansion of the existing network or deleting the unnecessary raingages.     

Synthesis characterization and hydrogen absorption studies of the composite materials La2Mg17–x wt% LaNi5

The composite materials La2Mg17–x wt% LaNi5 have been synthesized with various values of x, and the hydrogenation behaviour of these materials has been extensively studied. The as-synthesized materials were activated by heating the materials at about 360±10°C temperature under a hydrogen pressure of 33 kg cm-2 for nearly 6 h. The maximum hydrogen storage capacity was found to be 5.3 wt% for the composite material La2Mg17–10 wt% LaNi5 at 400±10°C temperature. This is one of the very highest storage capacities known so far. The initial rate of hydrogen absorption of La2Mg17–10 wt% LaNi5 was found to be 20 cm3 g-1 min-1 (at 400±10°C temperature). In order to elucidate the influence of LaNi5 addition, which significantly accelerated the hydriding rate and hydrogen storage capacity of La2Mg17, structural–microstructural characterization and chemical analysis of the composite materials employing X-ray diffraction, scanning electron microscopy and energy dispersive analysis of X-rays techniques have been carried out.     

Studies on the electrical conductivity and galvanomagnetic characteristics of short carbon fibre filled thermoplastic elastomers

The electrical resistivity of short carbon fibre filled thermoplastic elastomers based on natural rubber-high density polyethylene (NR-HDPE) blend and styrene-isoprene-styrene (S-I-S) block copolymer has been studied by varying the concentration of fibre from the 0 to 40 phr level. A sharp drop in resistivity is observed in both cases after a critical concentration of fibre is reached, with the S-I-S system showing lower values of critical concentration. At higher concentrations, experimental values of the electrical conductivity agreed reasonably well with the calculated values from a theory based on the probability of formation of a conductive network. The effect of temperature on the resistivity of the composites has also been investigated in a temperature range of 27–120 °C and 27–90 °C for the NR-HDPE system and S-I-S system, respectively. The type of carrier in both the composites is found to be n-type, i.e. electrons, and the activation energy of hopping of the electrons for both the systems has been calculated. A Hall effect study has also been carried out to determine the carrier concentration and drift mobility of both the composites.     

Bayes estimation of the linear hazard-rate model

In life testing, the failure-time distributions are often specified by choosing an appropriate hazard-rate function. The class of life-time distribution characterized by a linear hazard-rate includes the one-parameter exponential and Rayleigh distributions. Usually the parameters of the linear hazard-rate model are estimated by the method of least squares. This work is concerned with Bayes estimation of the two-parameters from a type-2 censored sample. Monte Carlo simulation is used to compare the Bayes risk of the regression estimator with the minimum Bayes risk. Discrete mixtures of decreasing failure rate distributions are known to have decreasing failure rates. The authors prove that the result holds for continuous mixtures as well