Photobiomodulation Therapy and the Glymphatic System: Promising Applications for Augmenting the Brain Lymphatic Drainage System

The glymphatic system is a glial-dependent waste clearance pathway in the central nervous system, devoted to drain away waste metabolic products and soluble proteins such as amyloid-beta. An impaired brain glymphatic system can increase the incidence of neurovascular, neuroinflammatory, and neurodegenerative diseases. Photobiomodulation (PBM) therapy can serve as a non-invasive neuroprotective strategy for maintaining and optimizing effective brain waste clearance. In this review, we discuss the crucial role of the glymphatic drainage system in removing toxins and waste metabolites from the brain. We review recent animal research on the neurotherapeutic benefits of PBM therapy on glymphatic drainage and clearance. We also highlight cellular mechanisms of PBM on the cerebral glymphatic system. Animal research has shed light on the beneficial effects of PBM on the cerebral drainage system through the clearance of amyloid-beta via meningeal lymphatic vessels. Finally, PBM-mediated increase in the blood–brain barrier permeability with a subsequent rise in Aβ clearance from PBM-induced relaxation of lymphatic vessels via a vasodilation process will be discussed. We conclude that PBM promotion of cranial and extracranial lymphatic system function might be a promising strategy for the treatment of brain diseases associated with cerebrospinal fluid outflow abnormality.     

Microstructure Variation and Hardness Diminution During Low Cycle Fatigue of 55NiCrMoV7 Steel

 The influence of temperature and hardness level on the cyclic behavior of 55NiCrMoV7 steel, and the microstructure variation and hardness diminution during low cycle fatigue behavior were investigated. By means of SEM and XRD, the modality of carbides and the full width half maximum (FWHM) of martensite (211) [M(211)] of X ray diffraction spectrum in fatigue specimen were studied. The results showed that the cyclic stress response behavior generally showed an initial exponential softening for the first few cycles, followed by a gradual softening without cyclic softening saturation. The fatigue behavior of the steel is closely related to the hardness level. The hardness diminution and the variation of half width M(211) are remarkably influenced by the interaction between the cyclic plastic deformation and the thermal loading when the fatigue temperature exceeds the tempering temperature of the steel.     

Secretome from Human Mesenchymal Stem Cells-Derived Endothelial Cells Promotes Wound Healing in a Type-2 Diabetes Mouse Model

Tissue regeneration is often impaired in patients with metabolic disorders such as diabetes mellitus and obesity, exhibiting reduced wound repair and limited regeneration capacity. We and others have demonstrated that wound healing under normal metabolic conditions is potentiated by the secretome of human endothelial cell-differentiated mesenchymal stem cells (hMSC-EC). However, it is unknown whether this effect is sustained under hyperglycemic conditions. In this study, the wound healing effect of secretomes from undifferentiated human mesenchymal stem cells (hMSC) and hMSC-EC in a type-2 diabetes mouse model was analyzed. hMSC were isolated from human Wharton’s jelly and differentiated into hMSC-EC. hMSC and hMSC-EC secretomes were analyzed and their wound healing capacity in C57Bl/6J mice fed with control (CD) or high fat diet (HFD) was evaluated. Our results showed that hMSC-EC secretome enhanced endothelial cell proliferation and wound healing in vivo when compared with hMSC secretome. Five soluble proteins (angiopoietin-1, angiopoietin-2, Factor de crecimiento fibroblástico, Matrix metallopeptidase 9, and Vascular Endothelial Growth Factor) were enriched in hMSC-EC secretome in comparison to hMSC secretome. Thus, the five recombinant proteins were mixed, and their pro-healing property was evaluated in vitro and in vivo. Functional analysis demonstrated that a cocktail of these proteins enhanced the wound healing process similar to hMSC-EC secretome in HFD mice. Overall, our results show that hMSC-EC secretome or a combination of specific proteins enriched in the hMSC-EC secretome enhanced wound healing process under hyperglycemic conditions.     

CircRNAs as Potential Blood Biomarkers and Key Elements in Regulatory Networks in Gastric Cancer

Gastric cancer (GC) is the fifth most common type of cancer and the third leading cause of cancer death in the world. It is a disease that encompasses a variety of molecular alterations, including in non-coding RNAs such as circular RNAs (circRNAs). In the present study, we investigated hsa_circ_0000211, hsa_circ_0000284, hsa_circ_0000524, hsa_circ_0001136 and hsa_circ_0004771 expression profiles using RT-qPCR in 71 gastric tissue samples from GC patients (tumor and tumor-adjacent samples) and volunteers without cancer. In order to investigate the suitability of circRNAs as minimally invasive biomarkers, we also evaluated their expression profile through RT-qPCR in peripheral blood samples from patients with and without GC (n = 41). We also investigated the predicted interactions between circRNA-miRNA-mRNA and circRNA-RBP using the KEGG and Reactome databases. Overall, our results showed that hsa_circ_0000211, hsa_circ_0000284 and hsa_circ_0004771 presented equivalent expression profiles when analyzed by different methods (RNA-Seq and RT-qPCR) and different types of samples (tissue and blood). Further, functional enrichment results identified important signaling pathways related to GC. Thus, our data support the consideration of circRNAs as new, minimally invasive biomarkers capable of aiding in the diagnosis of GC and with great potential to be applied in clinical practice.     

Microtribology,squeeze, and friction of the colloidal layer

Lubricant films containing colloidal overbased calcium salts have particular effects on detergency and on the wear process. The mechanical properties of such boundary films are very dependent on the process conditions, and are essentially a result of physico-chemical transformations of the colloid. Three types of films were compared: a film obtained by the drying of the base solvent, a film due to the compaction of the colloid between two steel surfaces, and a friction film obtained with this type of lubricant. Adsorption, compaction, and shear transformations induce a solid film. The pressure effect on the frictional behaviour of these colloidal films has been investigated using a surface force apparatus for low contact pressure (10⁴ to 10⁶ Pa), and using tribometers supporting heavy loads for the analysis of the high pressure domain. Above a critical pressure, evaluated at 10⁶ Pa, the colloidal film does not flow, but forms a compacted mattress sliding on the surface plane and squeezing a molecular layer of lubricant.     

Modeling bread baking with focus on overall deformation and local porosity evolution

A two dimensional model of bread baking was developed including, for the first time, the dependence of dough viscosity on both temperature and moisture content, the carbon dioxide dissolved from liquid water together with gas generation from yeast at the beginning of baking and the shrinkage due to dough drying. Particular attention was paid to experimental validation of both overall and local variables such as local temperature, overall mass loss, and local moisture content, overall CO₂ released into the oven, and overall deformation and local expansion or shrinkage. Sensitivity studies on generation of carbon dioxide, gravity, and shrinkage are presented to discuss their influences on bread geometry, porosity (reflecting the alveolar structure) and gas pressure. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3847–3863, 2016     

Active application of primer acid on acid‐treated enamel: Influence on the bond effectiveness of self‐etch adhesives systems

Aim: Evaluate the composite‐to‐enamel bond after passive or active application of self‐etching primer systems on polished or pre‐etched enamel with phosphoric acid. Materials and Methods: Two self‐etch adhesives systems (SEAS) were used: Clearfil SE Bond and Easy Bond. Third human molars were divided into 8 groups (N = 10). The crown of each tooth was sectioned into halves and the mesial/distal surfaces were used. The adhesives were actively or passively applied on enamel with or without prior phosphoric‐acid etching. Resin composite cylinders were built after adhesive application. After stored in relative humidity for 24 hr/37°C the specimens were subjected to microshear test in universal testing a machine at a crosshead speed of 0.5 mm/minute. The results were analyzed with three‐way ANOVA and the Tukey test. The enamel‐etching pattern was evaluated under SEM. Results: The 2‐step SEAS system presented significantly higher adhesive bond strength means (47.37 MPa) than the 1‐step (36.87 MPa). A poor enamel‐ etching pattern was observed in active mode showing irregular and short resin tags, however there was not compromised the bond strength. Conclusion: Active or passive application produced similar values of bond strength to enamel regardless of enamel pretreatment and type of SEAS.     

Modelling of flocculation using a population balance equation

In this paper, a model based on a population balance equation (PBE) is developed. It aims at reproducing experimental floc size distributions obtained at steady state in a jar-test. The objective is to develop a simple model, based on physical phenomena, and that does not contain any adjustable parameters. Floc size distributions obtained using a part of a particle image velocimetry (PIV) device and image analysis are used to develop mathematical expressions for the aggregation and breakage kernels. A critical volume beyond which breakage is of significant importance is identified and related to the hydrodynamics. Hydrodynamic sequencing allows the distribution of the daughter particles resulting from a breakage event to be established. The model is finally successfully validated against experimental results.     

Deposition of thick and 50% porous YpSZ layer by spraying nitrate solution in a low pressure plasma reactor

The deposition of Yttria partially Stabilized Zirconia (YpSZ) for Thermal Barrier Coating application (TBC) is a current topic of interest. The TBC must exhibit high thickness (100–300 μm), vertical cracks in order to be a strain tolerant layer, and high porosity to decrease the thermal conductivity. In this paper, a solution of nitrate salt is introduced into a low pressure plasma discharge (600 Pa, 80–220 W) to obtain YpSZ layers.Several analytical techniques were used to study the characteristics and the stability of the YpSZ layers obtained in the low pressure plasma reactor. Optical emission spectroscopy indicated that the oxidant chemistry in the plasma is responsible for the formation of the oxide and the elimination of the nitrates at low temperature (T < 300 °C on the layer). SEM, water porosimetry, thermal diffusivity and XRD analyses were performed to study the effect of the parameters (power of the plasma discharge, post-treatment, heat treatment) on the structure, the morphology and the stability of YpSZ coatings. For example, it was observed that YpSZ is 50% porous in all cases and that the nanostructures of the coating resist against high temperature conditions (1200 °C/5 h).