Dynamic Behavior of the Doubly Fed Induction Generator During Three-Phase Voltage Dips

The use of doubly fed induction generators (DFIGs) in large wind turbines has become quite common over the last few years. These machines provide variable speed and are driven with a power converter which is sized for a small percentage of the turbine-rated power. A drawback of the DFIG is that it is very sensitive to grid disturbances, especially to voltage dips. However, the operation of the machine in these situations has only been studied in the literature by means of simulations. This paper develops a theoretical analysis of the dynamic behavior of the induction machine during three-phase voltage dips. The proposed analysis contributes to understanding the causes of the problem and represents a very useful tool to improve the existing solutions and propose new alternatives. Experimental results are in good agreement with those obtained theoretically and validate the proposed analysis.     

Illicit drug consumption estimations derived from wastewater analysis: A critical review

The consumption of illicit drugs causes indisputable societal and economic damage. Therefore it is necessary to know their usage levels and trends for undertaking targeted actions to reduce their use. Recently, a new approach (namely sewage epidemiology) was developed for the estimation of illicit drug use based on measurements of urinary excreted illicit drugs and their metabolites in untreated wastewater. This review aims at critically evaluating the published literature and identifying research gaps of sewage epidemiology. Firstly, the existing analytical procedures for the determination of the four most used classes of illicit drugs worldwide (cannabis, cocaine, opiates and amphetamine-like stimulants) and their metabolites in wastewater are summarized and discussed. The focus lies on the sample preparation and on the analysis with chromatographic techniques coupled to mass spectrometry. Secondly, back-calculations used to transform measured concentrations in wastewater (in ng/L) into an amount of used illicit drug (in g/day per 1000 inhabitants or doses/day per 1000 inhabitants) are discussed in detail for the four groups of illicit drugs. Sewage epidemiology data from Spain, Belgium, UK, Italy, Switzerland and USA are summarized and compared with data from international organisations, such as the European Monitoring Centre for Drug and Drug Addiction (EMCDDA) and the United Nations Office on Drugs and Crime (UNODC). The results derived from wastewater analysis show in general good agreement with existing prevalence data (percentage of a population that uses illicit drugs at a given time) and demonstrate the potential of sewage epidemiology. However, this review confirms that future work should focus on further optimisation and standardisation of various important parameters (e.g. sample collection and back-calculations). In the future, sewage epidemiology could be used in routine drug monitoring campaigns as a valuable tool in addition to the classical socio-epidemiological studies for the determination of local, national and international illicit drug use.     

Intrinsic instability of flame–acoustic coupling

This paper shows that a flame can be an intrinsically unstable acoustic element. The finding is clarified in the framework of an acoustic network model, where the flame is described by an acoustic scattering matrix. The instability of the flame acoustic coupling is shown to become dominating in the limit of no acoustic reflections. This is in contrast to classical standing-wave thermoacoustic modes, which originate from the positive feedback loop between system acoustics and the flame. These findings imply that the effectiveness of passive thermoacoustic damping devices is limited by the intrinsic stability properties of the flame.     

Solubility of actinide surrogates in nuclear glasses

This paper discusses the results of a study of actinide surrogates in a nuclear borosilicate glass to understand the effect of processing conditions (temperature and oxidizing versus reducing conditions) on the solubility limits of these elements. The incorporation of cerium oxide, hafnium oxide, and neodymium oxide in this borosilicate glass was investigated. Cerium is a possible surrogate for tetravalent and trivalent actinides, hafnium for tetravalent actinides, and neodymium for trivalent actinides. The material homogeneity was studied by optical, scanning electron microscopy. Cerium L_III XANES spectroscopy showed that the Ce³⁺/Ce_total ratio increased from about 0.5 to 0.9 as the processing temperature increased from 1100 to 1400 °C. Cerium L_III XANES spectroscopy also confirmed that the increased Ce solubility in glasses melted under reducing conditions was due to complete reduction of all the cerium in the glass. The most significant results pointed out in the current study are that the solubility limits of the actinide surrogates increases with the processing temperature and that Ce³⁺ is shown to be more soluble than Ce⁴⁺ in this borosilicate glass.     

Predicting the damage development in epoxy resins using an anisotropic damage model

For fiber-reinforced plastics, the strain-rate dependent response is governed by the matrix behavior. In this work, the Goldberg model is considered for the epoxy matrix constitutive material model. Moreover, the strain-rate dependency is achieved by direct influence on the elastic modulus, the inelastic strain, and the material strain to failure. In addition, an anisotropic damage response is implemented and extended through a strain-rate dependent definition. Since the constitutive model relies on nonphysical parameters, a parameter study is further performed. Additional numerical investigations using a micro-mechanical model are performed. Tension and shear loading conditions are evaluated and the influence of different strain rates is explored. Furthermore, the implemented anisotropic damage model is compared and discussed against an isotropic damage model.     

Editorial: Security and Privacy in Internet of Things

Mobile Networks and Applications -     

Thermal and structural behavior of milk fat. 1. Unstable species of anhydrous milk fat

The thermal and structural behavior of anhydrous milk fat (AMF) was studied by a technique that allowed simultaneous time-resolved synchrotron X-ray diffraction as a function of temperature (XRDT) and high sensitivity differential scanning calorimetry (DSC) to be carried out in the same apparatus from the same sample. In this paper (the first of a series), the less stable crystalline structures made by triacylglycerols (TG) of bulk AMF after its liquid quenching down to -8 degrees C are addressed The coexistence of two lamellar structures characterized by sharp long spacing reflections corresponding to well-defined 3L (70 A) and 2L (47 A) longitudinal stackings but broad short spacing lines related to poorly ordered hexagonal (alpha) lateral packing is shown for the first time, The bilayered structure was very unstable, since it disappeared during a 20-min isothermal recording. Simultaneous DSC and X-ray monitoring of AMF heating in the range -8, +50 degrees C at a rate of 2 degrees C/min allows the same sample to be followed on the evolution of these unstable forms to more stable varieties. The 3L stacking transforms into a new 2L crystalline structure characterized by broad LS reflections corresponding to a ill-defined 2L (37 A) longitudinal stacking but a more compact orthorhombic (beta') lateral packing. A delimitation of the domains of existence of the crystalline structures resulted from the comparison of detailed analysis of the evolutions of positions, intensities, and widths of X-ray peaks as a function of temperature to microcalorimetry recording.     

Multivariate analysis of maturity stages,including quality and aroma,in ‘Royal Glory’ peaches and ‘Big Top’ nectarines

Ethylene production, quality attributes and aroma compounds were analysed to determine the maturity evolution of ‘Big Top’ nectarines and ‘Royal Glory’ peaches at harvest dates ranging from 89 to 116 days after full bloom (DAFB) for nectarines and from 85 to 112 DAFB for peaches. These cultivars are highly coloured even in the early stages of maturity. However, the two cultivars had different patterns of ethylene production, this being slower in nectarines than in peaches. Principal component analysis (PCA) was used to provide partial visualisation of the complete data set in a reduced dimension plot. Separation of the two cultivars can be shown by means of a two‐dimensional plot of the samples. Although only some aroma compounds are slightly correlated with quality parameters, when aroma volatiles were included in the PCA, the aroma compound set allowed both cultivars to be classified into three stages of maturity: immature, intermediate and fully mature. Compounds such as propanol, hexyl acetate, 2‐methylpropyl acetate, limonene, butanol, (Z)‐3‐hexenyl acetate, buthyl acetate, linalool, ethanol, propyl acetate and ethyl acetate are the most important volatiles for ‘Big Top’ nectarines. It is suggested that the presence of these compounds can be used to indicate when the fruit should be harvested. The presence of γ‐decalactone, δ‐octalactone, γ‐octalactone, ethyl butyrate, hexanal and (E)‐2‐hexenol can be used to indicate the harvesting maturity stage for ‘Royal Glory’ peaches. The optimum maturity date for harvest would be 105–107 DAFB for ‘Big Top’ nectarines and 93–95 DAFB for ‘Royal Glory’ peaches. © 2002 Society of Chemical Industry     

Fully integrated MIXLER based on VHF CMOS-MEMS clamped-clamped beam resonator

The design and test of a fully integrated CMOS-MEMS-MIXLER, using a commercial technology (AMS 0.35 mum) is presented. The MEMS structure is basically a clamped-clamped beam resonator implemented with the polysilicon capacitance module of the selected technology, showing a fundamental lateral resonance frequency of 22.5 MHz. Two different approaches based, respectively, on the nonlinearity of the voltage against the excitation force and on the amplitude modulation of the excitation signal, have been proposed in order to operate the MEMS as a MIXLER