Moisture Dependent Physical Properties of Dry Sweet Corn Kernels

Physical properties of sweet corn kernels have been evaluated as a function of kernel moisture content, varying from 9.12 to 17.06% (db). In the moisture range, kernel length, width, thickness, and geometric mean diameter increased linearly from 9.87 to11.09 mm, 7.41 to 9.25 mm, 3.25 to 4.37 mm, and 6.18 to 7.62 mm, respectively, with increase in moisture content from 9.12–17.06%. The sphericity index, kernel volume, kernel surface area, and thousand seed weight increased linearly from 62.6 to 68.8, 93.8 to 194.3 mm³, 120.1 to 182.9 mm², and 220 to 268 gr, respectively. Apparent density and bulk density decreased linearly from 1.315 to 1.232 g/cm³ and 0.765 to 0.698 g/cm³, respectively, while bulk porosity increased from 41.8 to 43.3%. The highest static coefficient of friction was found on the plywood surface. The static coefficient of friction increased from 0.680 to 0.891, 0.605 to 0.741, and 0.530 to 0.644 for plywood, galvanized iron, and aluminum surfaces, respectively. The angle of repose increased linearly from 30.2 to 35.2° with the increase of moisture content.     

Ion Chromatographic Determination of Free Cyanide in Different Classes of Bottled Natural Mineral Water Consumed in Turkey

An ion chromatographic method for the quantitative determination of free cyanide in bottled natural mineral waters were measured in terms of selectivity, linearity, the limit of detection, limit of quantification, repeatability, precision, and accuracy. Chromatographic separation of free cyanide ions was accomplished with an anion-exchange column and detected by pulsed amperometric detection with a silver working electrode. The method was found to be selective, linear (r² = 0.999) at a concentration range of 0.5 to 134 μg L^?1, precise, and accurate. Recovery values of free cyanide in all classes of natural mineral water varied from 65.9 ± 1.6 to 95.2 ± 0.7 at different spiking levels (5–70 μg L^?1). Parameters (total dissolved solids, mineral interferences, and added sodium hydroxide) affecting the recovery values were studied in this project. The limit of detection and limit of quantification were found to be 0.295 and 0.983 μg L^?1, respectively. The proposed method was applied to 27 different brands of commercially available bottled natural mineral water products sold in Turkish markets. These natural mineral waters were classified as: (i) very low mineral concentration, (ii) low mineral concentration, (iii) intermediate mineral concentration, and (iv) high mineral concentration based on their total dissolved solids contents according to European Union Directive (Directive 80/777/EEC). Levels of free cyanide residues in the samples ranged from > limit of detection to 6.12 μg L^?1. The highest average concentration of free cyanide residues was found in the class of “high mineral concentration waters.” However, the determined free cyanide values in all of the tested natural mineral water samples were found to be within the limits of European Union legislation.     

Effect of different roasting methods on the proximate by composition,flow properties,amino acid compositions,colour, texture,and sensory profile of the chickpeas

Roasting is a common process for chickpeas to improve their texture, palatability, appearance, shelf-life, physical, and functional properties. This study aimed to determine the effect of different roasting methods (conventional, microwave, and microwave + conventional) on the proximate and amino acid compositions, powder properties, texture, and sensorial properties of the chickpeas. For this purpose three different roasting times (3, 5, and 7 min), microwave powers (100, 300, and 600 W), and microwave roasting + conventional roasting treatment (100 W + 250 °C, 300 W + 250 °C, and 600 W + 250 °C) were applied to raw chickpea samples. The moisture content and water activity values of roasted chickpeas were found to be lower than 7% (w.b.) and 0.50, respectively. The lower ash and protein contents, hygroscopicity value, wettability time and higher fat content and L* value were observed for control compared to roasted samples. The flowability behaviour of the samples was found at a fair level. Roasting methods significantly affected the amount of amino acids in chickpeas but do not reduce the nutritional quality of their proteins. The hardness value of chickpea samples from the suture and cheek angle was decreased parallel to the increase in the roasting temperature and time. The highest sensory scores in terms of general appeal were obtained from the combined group (300 W–250 °C) for 3 min.     

Rheological properties of reduced-fat and low-fat ice cream containing whey protein isolate and inulin

Instrumental analyses were used to evaluate the rheological properties of regular (10%), reduced-fat (6%) and low-fat (3%) ice cream mixes and frozen ice creams stored at −18 °C. The reduced-fat and low-fat ice creams were prepared using 4% whey protein isolate (WPI) or 4% inulin as the fat replacement ingredient. The composition, colour, apparent viscosity, consistency coefficient, flow behaviour index, hardness and melting characteristics were measured. No effect of WPI or inulin was obtained on the colour values. Compared with regular ice cream, WPI changed rheological properties, resulting in significantly higher apparent viscosities, consistency indices and greater deviations from Newtonian flow. In addition, both hardness and melting resistance significantly increased by using WPI in reduced-fat and low-fat ice creams. Inulin also increased the hardness in comparison to regular ice cream, but the products made with inulin melted significantly faster than the other samples.     

Volatile compounds of olive oils from different geographic regions in Turkey

In this research, changes in volatile compounds of olive oil were investigated in terms of cultivar, harvest year, and geographic regions (Mediterranean, Aegean, Southeastern Anatolia, Marmara, and Black Sea) were investigated. Volatile compounds of olive oils were extracted by using solid-phase microextraction (SPME) method and were identified with gas chromatography–mass spectrometry. A total of 59 volatile compounds from seven different chemical groups including aldehydes, ketones, hydrocarbons, alcohols, esters, terpenes, and furans were identified. Aldehydes were detected as the major group in all geographic regions. Among aldehydes, trans-2-hexenal was found to be relatively higher. Alcohols and esters were determined as other important compounds. While many volatile compounds were affected by olive cultivar factor, this factor had no significant effect on esters. Principal component analysis showed that volatile compounds could play an important role in the separation of regions.     

Comparison of lactic acid bacteria diversity during the fermentation of Tarhana produced at home and on a commercial scale

Food Science and Biotechnology - In this study, lactic acid bacteria diversity during the fermentation of homemade and commercially prepared Tarhana, a traditional fermented cereal food from...     

Heavy metal bioaccumulation by cultivated Agaricus bisporus from artificially enriched substrates

Cultivated Agaricus bisporus possess the ability to bioaccumulate seven heavy metals (Pb, Cd, Hg, Fe, Cu, Mn, and Zn). The cultivated champignon mushroom A. bisporus was grown in soil composts of 16 different compositions. An edible mushroom, A. bisporus was also cultivated on humic compost artificially fortified with the seven heavy metals at five different concentrations (0.1 mg/kg, 0.5 mg/kg, 1.0 mg/kg, 3.0 mg/kg, and 10.0 mg/kg) and on control substrate (0 mg/kg) on a dry weight basis. The method of measuring bioaccumulation was flame atomic absorption spectrophotometry.     

Mycoflora of hazelnut (Corylus avellana L.) and aflatoxin content in hazelnut kernels artificially infected with Aspergillus parasiticus

In this research, 30 hazelnut samples were used to determine their internal mould populations and their aflatoxin contents. The results showed that Aspergillus was the most common genus in the experimental samples (96.6% of all samples). Thirty-one% of isolates were classified as Aspergillus flavus and none of the samples contained aflatoxins. In the second part of the experiment, the kernels were inoculated with conidia of Aspergillus parasiticus and incubated at three different humidified conditions and two different temperatures for 45 days. Aflatoxin contents of the samples kept in 98% relative humidity and at 28 degrees C were higher (904.6 micrograms/kg) than that of the other samples. On the other hand, no aflatoxin was detected in the control samples that were not inoculated but kept at the same conditions.     

Effect of reuterin produced by Lactobacillus reuteri on the surface of sausages to inhibit the growth of Listeria monocytogenes and Salmonella spp

Reuterin is a bacteriocin produced by some strains of Lactobacillus reuteri. The strain used in this study was isolated from raw milk from a dairy farm nearby Ankara. Beef sausage is a long years produced bratwurst style meat product in Turkey, as well as in some other countries in the Mediterranean region. Sausages are produced by raw meat; sometimes lactic starter cultures are added or spontaneous fermentation is employed. The production and storage conditions of the product promotes the growth of Listeria monocytogenes and Salmonella spp. Although nitrate is added as an antimicrobial substance against many pathogens, sometimes however nitrate application is not preventive enough on the surface because of the natural film around the sausages. Since most of the contaminations take place at post production steps, pathogenic growth is more effective on the surface of the sausages in refrigerated conditions. In this study, reuterin was applied to the surface of the sausages in order to prevent the growth of these two pathogens along with nitrate used as an additive in the product. Reuterin has inhibited the growth of L. monocytogenes considerably but not of Salmonella spp. on the surface of the sausages.