Effect of vanillin, ethyl vanillin, and vanillic acid on the growth and heat resistance of Cronobacter species

Preservatives could be part of an effective intervention strategy for the control of Cronobacter species in foods, but few compounds with the desired antimicrobial properties have been identified to date. We examined the antibacterial activity of vanillin, ethyl vanillin, and vanillic acid against seven Cronobacter spp. in quarter-strength tryptic soy broth with 5 g/liter yeast extract (TSBYE) adjusted to pH 5.0, 6.0, and 7.0 at 10, 21, and 37°C. All compounds exhibited pH- and temperature-dependant bacteriostatic and bactericidal activity. MICs of vanillin and ethyl vanillin consistently increased with decreasing pH and temperature, but vanillic acid had little activity at pH values of 6.0 and 7.0. The MICs for all temperatures, pH values, and bacterial strains tested were 2 mg/ml ethyl vanillin, 3 mg/ml vanillin, and >8 mg/ml vanillic acid. MBCs also were influenced by pH, although significantly higher concentrations were needed to inactivate the bacteria at 21°C than at 10 or 37°C. Survivor curves for Cronobacter sakazakii strains at the MBCs of each compound revealed that all treatments resulted in immediate loss of cell viability at 37°C. Measurements of propidium iodide uptake indicated that the cell membranes were damaged by exposure to all three compounds. The thermal resistance of C. sakazakii was examined at 58°C in TSBYE supplemented with MBCs of each compound at pH 5.0 and 6.0. D-values at pH 5.0 were reduced from 14.56 ± 0.60 min to 0.93 ± 0.01, 0.63 ± 0.01, and 0.98 ± 0.02 min for vanillin, ethyl vanillin, and vanillic acid, respectively. These results suggest that vanillin, ethyl vanillin, and vanillic acid may be useful for the control of Cronobacter spp. in food during preparation and storage.     

Soil productivity analysis based on a fuzzy logic system

BACKGROUND: Maintaining soil productivity is essential if agriculture production systems are to be sustainable. However, there is a paucity of tools for measurement for the purpose of understanding changes in soil productivity. Fuzzy logic‐based analysis offers this possibility. It is a new method on the evaluation of soil productivity in Turkey and even in the world. RESULTS: Values for pH, salinity, carbonate and organic matter were entered into the system as input variables so as to obtain soil productivity as the output. After the membership functions related to input and output were determined, rules were created. Then, the fuzzy logic system was applied separately to pH, salinity, lime and organic matter values of different soil types present in the Kocaeli region with the aim of obtaining corresponding fuzzy values. Thus, soil productivity profiles of the region were deciphered. CONCLUSION: Organic matter levels in the study field remained below 30 g kg^?1 and varied between 22 and 28 g kg^?1. Productivity values were obtained as a percentage and varied between 16.9% and 18.1%. The lime content of the study soils varied in the range of 33–88 g kg^?1. Average totals for salt values of the field changed between 0.58 and 0.77 g kg^?1. Copyright © 2010 Society of Chemical Industry     

The effects of rosemary extract combination with vacuum packing on the quality changes of Atlantic mackerel fish burgers

The effects of the use of antioxidant technology on the quality of mackerel burgers stored at 4 °C were investigated in terms of sensory, biochemical [thiobarbituric acid (TBA), total volatile basic nitrogen (TVB‐N), peroxide value (PV) and free fatty acids (FFA)] and microbiological analyses [total viable count (TVC)]. Fish meat was divided into three groups; the control (C) without rosemary extract, the second group with 0.4% rosemary extracts (Group A) and the third with 0.8% rosemary extracts (Group B). Results showed that the TVB‐N level did not exceed acceptability limit (30–35 mg 100 g^?1) for all groups. TBA value for the control significantly increased from 1.47 to 4.80 MA kg^?1 whereas it slightly increased in treatment groups as the storage time increased. Significantly higher PV and FFA (P < 0.05) were obtained from the control group. Rosemary extract, in combination with vacuum pack was effective in controlling the growth of bacteria and biochemical indices.     

Effects of nitrite levels,endpoint temperature and storage on pink color development in turkey rolls

The objective of this research was to determine the relationship between minimum nitrite level, endpoint temperature and storage period on pink discoloration of turkey rolls. Rolls were prepared with 0, 3 or 5 parts per million (ppm) NO₂^–, cooked to an endpoint temperature of 75 °C or 85 °C and stored at 4 °C. During the 13-day storage period, on the 0th, 4th, 8th and 13th days cured pigment, total pigment, residual nitrite and color parameters were measured and sensory color was evaluated. At each endpoint temperature, addition of 3 ppm or 5 ppm NO₂^– significantly increased cured pigment and total pigment levels. Cured pigment levels of turkey rolls cooked to 75 °C were higher than rolls cooked to 85 °C, regardless of the NO₂^– level. There was a significant decrease in cured pigment levels at the end of the storage period (13th day). Analysis of residual NO₂^– in all treatment groups showed no detectable amounts. Endpoint temperature and addition of NO₂^– affected L* values: rolls cooked to the 75 °C endpoint had higher L* values. The additon of nitrite with the 75 °C endpoint temperature resulted in higher a* values. a* values also increased during the storage. The higher endpoint temperature (85 °C) resulted in lower a* values. Yellowness was not affected by final cooking temperature. Both the addition of NO₂^– and storage decreased b* values. The panel found no differences in pinkness intensity between the two levels of added nitrite (3 and 5 ppm). Sensory pinkness intensity in nitrite-added samples increased with increasing storage.     

Constraints in meeting food safety and quality requirements in the Turkish dairy industry: a case study of Izmir province

Recent global developments concerning food quality and food safety have influenced and stimulated food legislation in Turkey in accordance with internal and international trade and agreements. In this study, the way in which the dairy industry conforms to this legislation was analyzed through a case study of Izmir province, which generally has all the structural characteristics of the dairy sector in Turkey. A survey in which dairy plant managers responded to a special questionnaire was used to collect data from 86 dairy plants chosen on the basis of proportional sampling. According to the results of this study, (i) there are many dairy processors in the region, (ii) most managers have a limited education concerning their positions, (iii) most firms handle small volumes of milk and have little control over the raw milk supply, (iv) resources are too limited in these firms, limiting their ability to adopt most regulations, and (v) few processors apply the regulatory practices imposed by governmental agencies. Thus, food legislation is not enough to ensure food safety in the dairy industry in Turkey. Technical and educational support should be given to farmers and the staff of dairy firms by the Ministry of Agriculture to form an appropriate food safety infrastructure in Turkey for the milk and processed dairy products industry.     

The assessment of carcass composition of Awassi male lambs by real-time ultrasound at two different live weights

The accuracy of ultrasonography to measure fat thickness (FT) and longissimus dorsi muscle (LM) traits (area, depth and width) in live Awassi male lambs and predict carcass FT and LM traits was studied.Twenty six Awassi male lambs were randomly divided into light (L) (n = 13) and heavy (H) (n = 13) finishing lambs. Slaughter weight of lambs in L and H groups were 40 and 45 kg, respectively. FT and LM traits, cross-sectional area between the 12th and 13th rib were measured using real-time ultrasound in vivo and on the carcass after slaughter. All ultrasound and carcass measurements were the same except live weight (LW) (P < 0.001), cold carcass weight (CCW) (P < 0.001) and carcass LM width (P < 0.05). Overall, correlation coefficients between ultrasound and carcass FT, LM depth, width and area were 0.79, 0.82 (P < 0.001); 0.60, 0.58 (P < 0.05); 0.48, −0.17 (P > 0.05) and 0.89, 0.87 (P < 0.001), respectively, for lambs in L and H groups. The introduction of ultrasound FT and ultrasound LM area as independent variables in addition to LW in the multiple regression equations further improved the variations for carcass FT (84%, 71%), carcass LM area (79%, 79%), CCW (72%, 65%) for lambs in light and heavy groups whereas no improvement was observed for carcass yield.These results indicate that in vivo ultrasound FT and measurement of the LM area in association with LW could be used to estimate carcass FT, carcass LM area and CCW in different LW Awassi lambs.     

Adsorption of lead and copper on bentonite and grapeseed activated carbon in single- and binary-ion systems

In this study, bentonite originating from Turkey (Eski?ehir province) and activated carbon obtained from grapeseed were used as adsorbents for the removal of lead (Pb²⁺) and copper (Cu²⁺) ions from aqueous solutions. Experiments were performed in single- and binary-ion systems at constant temperature of 298 K and pH value of 5. In order to describe the adsorption mechanism Langmuir, Freundlich and Temkin isotherms were used. The total adsorption capacity values of adsorbents were compared. It was observed that the total adsorption capacity values were changed depending on the type of adsorbent used, type of metal ion and interaction between metal ions.     

Influence of weak organic acids and salts on the denaturation characteristics of intramuscular connective tissue. A differential scanning calorimetry study

Intramuscular connective tissue obtained from Longissimus dorsi muscle of a 4-year-old beef carcass was treated with NaCl solutions of 2, 4, and 6% (w/v), and CaCl₂ solutions of 50, 100, and 150 mM, and citric and lactic acid solutions of 0.5, 1.0, and 1.5% for three different marinating periods (24, 46, and 72 h). Changes in denaturation characteristics were investigated using differential scanning calorimetry and it was found that the denaturation onset temperature (T_o) and the denaturation peak temperature (T_p) increased as the NaCl concentration increased but decreased as the CaCl₂ concentration increased, irrespective of marinating time. Lactic and citric acid decreased T_o to about 39°C, from over 60°C breaking the structure of fibrils.     

The Effects of Heat Treatment on Some Mechanical Properties of Juvenile Wood and Mature Wood of Eucalyptus grandis

Heat treatment is a well-known method for modifying wood that is applied in different ways, and treatment schedules change from tree to tree. This treatment improves the physical properties of wood but, in general, it reduces the mechanical properties of wood. The effects of heat treatment on the mechanical properties of juvenile and mature wood of the same tree species have not been well-defined. Therefore, we focused our study on the differences in the mechanical properties of juvenile wood and mature wood of Eucalyptus grandis after both were subjected to heat treatment. Wood samples were treated at temperatures of 120, 150, and 180°C for 4, 6, and 8 h. The test results showed that decreases in the mechanical properties of juvenile wood (e.g., modulus of elasticity (MOE), modulus of rupture (MOR), compression strength (CS), and impact bending (IB)) were greater than the decreases that occurred in mature wood that was heat treated at the same conditions.