The absence of corpus luteum formation alters the endocrine profile and affects follicular development during the first follicular wave in cattle

We previously established a bovine experimental model showing that the corpus luteum (CL) does not appear following aspiration of the preovulatory follicle before the onset of LH surge. Using this model, the present study aimed to determine the profile of follicular development and the endocrinological environment in the absence of CL with variable nadir circulating progesterone (P(4)) concentrations during the oestrous cycle in cattle. Luteolysis was induced in heifers and cows and they were assigned either to have the dominant follicle aspirated (CL-absent) or ovulation induced (CL-present). Ultrasound scanning to observe the diameter of each follicle and blood collection was performed from the day of follicular aspiration or ovulation and continued for 6 days. The CL-absent cattle maintained nadir circulating P(4) throughout the experimental period and showed a similar diameter between the largest and second largest follicle, resulting in co-dominant follicles. Oestradiol (E(2)) concentrations were greater in the CL-absent cows than in the CL-present cows at day -1, day 1 and day 2 from follicular deviation. The CL-absent cows had a higher basal concentration, area under the curve (AUC), pulse amplitude and pulse frequency of LH than the CL-present cows. After follicular deviation, the CL-absent cows showed a greater basal concentration, AUC and pulse amplitude of growth hormone (GH) than the CL-present cows. These results suggest that the absence of CL accompanying nadir circulating P(4) induces an enhancement of LH pulses, which involves the growth of the co-dominant follicles. Our results also suggest that circulating levels of P(4) and E(2) affect pulsatile GH secretion in cattle.     

Sampling from binomial and poisson distributions: A method with bounded computation times

An accurate acceptance-rejection algorithm is devised and tested. The procedure requires an average of less than 3 uniform deviates whenever the standard deviation of the distribution is at least 4, and this number decreases monotonically to 2.63 as . Variable parameters are permitted, and no subroutines for sampling from other statistical distributions are needed.This research was supported by the Austrian Research Council (Fonds zur Förderung der wissenschaftlichen Forschung).     

Effect of fuel injection pressure on a heavy-duty diesel engine nonvolatile particle emission

The effects of the fuel injection pressure on a heavy-duty diesel engine exhaust particle emissions were studied. Nonvolatile particle size distributions and gaseous emissions were measured at steady-state engine conditions while the fuel injection pressure was changed. An increase in the injection pressure resulted in an increase in the nonvolatile nucleation mode (core) emission at medium and at high loads. At low loads, the core was not detected. Simultaneously, a decrease in soot mode number concentration and size and an increase in the soot mode distribution width were detected at all loads. Interestingly, the emission of the core was independent of the soot mode concentration at load conditions below 50%. Depending on engine load conditions, growth of the geometric mean diameter of the core mode was also detected with increasing injection pressure. The core mode emission and also the size of the mode increased with increasing NOx emission while the soot mode size and emission decreased simultaneously.     

Rheology of natural fibers thermoplastic compounds: Flow length and fiber distribution

The presented study investigates the flow length and the corresponding fiber content distribution in the injection‐moulded natural fiber reinforced thermoplastics and its relation to fiber type and processing parameters such as injection pressure, temperature, injection rate and mould tempering by increasing die temperature. In this research, polypropylene compounds with nominally 30 wt % hemp and sisal fibers are investigated. The influence of the injection pressure (500 and 1000 bar), melt temperature (180°C, 200°C, and 220°C), and die temperature (23°C and 80°C) on the fiber content distribution all over the sample is investigated. An increasing linear trend of fiber content along the spiral length is observed as an evidence of a fiber/polymer multiflow system. A pattern for fiber content distribution with respect to the fiber length along the injected spiral can be distinguished, where the longer fibers are usually found at the end of the injected part and the shorter fibers remain near mould entrance point. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39861.     

Measurements of the Refractive Index Increment on Hydroxyethyl Starch as a Basis for Absolute Molecular Weight Determinations

Solutions of hydroxyethyl starch are used as a blood plasma substitute. If their physiological efficiency is to be optimized, they need to be accurately characterized in terms of their molecular weight and its distribution. The absolute determination of molecular weight and molecular weight distribution by means of light scattering require a knowledge of the refractive index increment. Although numerous investigations of the refractive index increment of hydroxyethyl starch have already been published, the results vary significantly due to the use of different samples and the choice of different measuring parameters. There was therefore an urgent need to examine the extent to which the refractive index increment depends on molecular parameters, the experimental method used and the type of processing. Here it was found that different sample preparations result in different contents of solid matter, so that an exact determination of the quantity is required. Hydroxyethyl starches in the molecular weight range of about Mw = 200.000 g/mol and varying degrees of substitution between DS 0.38 and 0.50 which are regarded as optimal for clinical use give a refractive index increment of dn/dc^633nm = 0.146 = 0.005 cm³/g (solvent: H₂O/0.02% NaN₃; T = 25°C).     

Liquid circulation in columns due to bubble drift

The profiles of liquid velocity and gas hold-up in convection cells of bubble columns were calculated numerically. Development of a circulation cell was calculated from momentum and mass balances. Breakdown of the circulation cell was calculated taking into account the drift motion of bubbles ascending in accordance with the velocity gradient of the liquid. A limit of stability for the development of circulation cells has been obtained.     

Measurement of radiation emitted from thin vaporizing liquid films for the calculation of surface temperature

Evaporation of liquid films, not subjected to motion, and with a starting thickness of 1 mm, was tested. Solvents dichloromethane and ethanol were used as liquids. Surface temperature during evaporation was measured in a non-intrusive way using pyrometry. The employed pyrometer was calibrated against a black body radiant. Measurement accuracy in the region of the ambient temperature is 0.2 K. Since any principal stray radiation is always measured along with the thermal radiation emitting from the liquid film, the measurement results are at first distorted. A correction calculation is described. With this, the various proportions of stray radiation can be subsequently calculated. In order to do this, the dimensions of the test equipment and the spectral data of the evaporating solvents must be taken into account. The quantity of stray radiation depends mainly on the properties of the surface onto which the liquid film is applied, as well as on the spectral transmissivity of the liquid. This was measured for every tested liquid according to wavelength and layer thickness. Where the spectral transmissivity of a liquid is low, a correction calculation of the measured surface temperature is not necessary, while a high level of accuracy is still retained.